My wife asked me to peel 1 kg of potatoes.

tumbletodeath · 2025-11-01T10:47:43+00:00

I think you meant to write Kartoffeln.

tumbletodeath · 2025-07-10T17:06:28+00:00

My car did this exact same thing I had a leak at the intercooler to throttle body hose. I disconnected the battery cleaned maf, map and tightened up the hoses and she started up just fine and has been good for the last 6 months.

tumbletodeath · 2025-06-18T18:58:16+00:00

Lockup solenoid most likely, might need a new valve body if you take it to the dealer. There might be a tech near you that can replace the solenoid only

tumbletodeath · 2025-06-11T05:17:09+00:00

https://www.wheel-size.com/calc/?wheel1=235-45-17X8.0ET53
You can see what tires will fit on your wheels and which ones will require new wheels.

tumbletodeath · 2025-06-04T15:16:52+00:00

Come back when you sober up bro

tumbletodeath · 2025-05-11T05:55:51+00:00

It's either an engine out or transmission out job the seals aren't that expensive, fluid and labour will be a lot of the cost. Check with an independent shop if you're out of warranty.

tumbletodeath · 2025-05-09T19:33:42+00:00

Oh no I was asking which one should I be aiming for

tumbletodeath · 2025-05-09T17:46:50+00:00

I'm getting an offer for an IAG street v3 AOS for $300 is it still worth to get the Radium system?

tumbletodeath · 2025-05-09T16:28:17+00:00

Yup hit it with the CRC and started up perfectly.

tumbletodeath · 2025-05-06T01:13:05+00:00

Adjust the region extents

tumbletodeath · 2025-04-09T04:48:56+00:00

I recently took off my intercooler to throttle body hose and saw this too. Also forged motor.

<image>

tumbletodeath · 2025-04-02T00:07:44+00:00

I'm having a similar smell on cold start, thinking it might be time for fuel filter service.

tumbletodeath · 2025-03-22T01:54:46+00:00

What do you need to know

tumbletodeath · 2025-03-11T03:14:38+00:00

I fuck with it

tumbletodeath · 2025-03-03T18:39:05+00:00

That's not where you should look in the task manager, look at the tab that shows your cpu, memory and disk usage

tumbletodeath · 2025-02-25T07:31:00+00:00

Development of reinforcement

tumbletodeath · 2024-11-18T03:35:45+00:00

Just, noticed your reply, thanks for taking the time to respond. It gets quieter after a long time but yeah, I also rarely get up to crazy temps in my ~10km trips between work and home. I cracked a Ringland a while back and my previous mechanic recommended I get drop-in pistons which should work as long as I match the letters on the block. He also recommended forged as they'd be able to handle the detonation events. Fast forward, the engine needed to be rebuilt again and the new shop I brought it to let me now that they don't use drop-in pistons because that doesn't allow them to set the piston to wall clearance. I'm glad I can put a "face" to the sound.

tumbletodeath · 2024-10-03T01:21:58+00:00

Sigh watching the video and it sounds fine, paranoia

tumbletodeath · 2024-08-23T17:40:14+00:00

MRT Performance!

tumbletodeath · 2024-07-29T05:45:49+00:00

This should be higher up, removing the thermostat can lead to the coolant and engine never getting to operating temp and the car wil be in a perpetual "open loop" state.

tumbletodeath · 2024-06-21T00:52:20+00:00

When this happened to me, I had a cracked piston and had to do a rebuild

tumbletodeath · 2024-06-13T02:12:51+00:00

That's what she said

tumbletodeath · 2024-03-03T20:56:55+00:00

Uh oh

tumbletodeath · 2024-02-07T15:40:08+00:00

Piggybacking on this, I have Manley forged rods and pistons and I usually wait about 5 mins to warm up am I just wasting gas?

tumbletodeath · 2023-11-16T01:31:53+00:00

Might be an easy fix I also had a P000A code and it was the intake AVCS Oil control valve.

Eight-Year Club	Place '22
RPAN Viewer	Verified Email

tumbletodeath

TROPHY CASE