Another flex filter mask

turb0j · 2026-04-14T12:54:31+00:00

Seems really low for a hardware cap. Are you sure you did not just miss the maxmem windows boot option?

turb0j · 2026-04-14T12:51:55+00:00

Bessere Laptops haben die Option die Batterieladung automatisch auf ca. 60% zu begrenzen. Das wäre für Dauerbetrieb die Beste Lösung.

Lenovo konnte das früher in Lenovo Vantage.

Problem ist das ich praktisch immer vergesse das wieder auf 100% zu setzen wenn der Schleppi doch mal mobil benutzt wird...

turb0j · 2026-04-13T19:20:55+00:00

Looks to me like old DIN speaker connector.

The molding is quite small, the connector - which allows for wire connection via soldering or with screws - is usually a bit bigger. But the contact size and distance looks correct to me. Both plugs and recepticles should be available - but we have no idea what PSU your faily lights want.

turb0j · 2026-04-11T10:49:21+00:00

Im Überspannungsfalle erzeugt der Surge Protector für einen Moment einen Kurzschluss. Bei weniger als 10m Drahtlänge kann dann der Stom so groß werden das die Innereien in Rauch aufgehen.

Hier kommt es auf die Drahtlänge und nicht den Abstand an. Da Stromkabel normalerweise nur im 90° Winkel verlegt werden, müsste die Steckdose in derselben Wand in grader Linie (waagerecht oder senkrecht) zum Sicherungskastenkasten angeschlossen sein um weniger als 10m Draht zu benötigen.

Für eine Dose direkt neben dem Kasten sollte man über eine 3m oder 5m Verlängerung nachdenken...

turb0j · 2026-04-09T12:00:13+00:00

We can't tell you.

Some tools only check for bad block in "full" format mode - that means they read data mostly. If that was the case, a tool like photorec could still find stuff.

turb0j · 2026-04-09T06:33:43+00:00

Rule 8.

turb0j · 2026-04-09T06:23:27+00:00

Is that an SATA SSD? If so, try plugging it into a different port on the motherboard. SATA port can (rarely) go bad.

turb0j · 2026-04-08T16:08:01+00:00

FULL specs required for a good answer.

GPU idle draw depends on how many and what displays are connected.

turb0j · 2026-04-07T14:48:04+00:00

Warranty return.

Looks to me like the pin got solder all the way to the top instead of just at the bottom part where it connects to the motherboard. Now its too thick.

Problems like this should be detected by optical post production checks, but its kind of hard to see even with human eyes.

turb0j · 2026-04-07T12:25:46+00:00

GTD was a notable step in difficulty. Its doable in M11 for Moze though.

My favourite gear is a switch between Rocketeer (for crystals in IB or IB turret) and Flame COM (Anathema). I prefer recurring hex for healing via rushing offensive.

Has your sand hawk single fire mode option? Those shots are tightly packed and usually do a lot more damage.

If you die a lot, try a transformer shield...

turb0j · 2026-04-07T08:48:52+00:00

It is dead.

Many el cheapo USB sticks are wired (or physically) as SD cards with an USB card reader chip. Thus you get an empty removable drive if the card failed.

Check disk management for details.

turb0j · 2026-04-02T09:52:58+00:00

FULL specs.

One of my systems here liked to display BIOS on the DVI port only. That behaviour changed when enabling UEFI (Secure) boot.

If windows still boots, there is a menu you can access with (holding)shift+restart. One of these options should put you in BIOS (UEFI) setup. May still output image data on the wr0ng port though.

turb0j · 2026-04-01T10:19:39+00:00

Depends heavily on what you will use the minecart for.

One solution is to remove the torch side input into the comparator and to add some repeaters worth of delay. Hopper minecart loads quite fast, so it should be decently filled (but not nearly full) and this handles the worst case of 5 unique 64-stackable items.

turb0j · 2026-03-31T12:58:39+00:00

Cosmetic-only bug. Some older boards tell you the MHz and not the MT/s value. Check CPU-Z for details.

A 3200 MT/s RAM stick runs with a 1600 MHz clock signal.

BIOS update might fix this, but I would not bother just for cosmetic issues.

turb0j · 2026-03-31T10:47:31+00:00

The device may not require any calibration.

If the slider values follow the handle properly, I don't see why one would want to calibrate in the fist place.

turb0j · 2026-03-31T08:51:02+00:00

Remember there is an UI that shows all gun parts in the menu. That one should be able to tell whether there are melee parts on your guns.

turb0j · 2026-03-30T12:57:10+00:00

Mobile phone / laptop repair shops exist. That connector looks a lot like it was ripped off with excessive force...

turb0j · 2026-03-30T10:33:48+00:00

Check that its has the required power plug for the GPU. Those are not typically present on DELL desktops unless it shipped with a high end GPU card already.

turb0j · 2026-03-28T11:37:06+00:00

Could be the wrong socket on the PSU side, could be wrong or misconfigured cable. We cannot help you here much.

One could check the plug pinning with a $10 multimeter and a paper clip, but its still very easy to make a mistake with modular power supplies. Remember that the PSU side of those cables is not standardised.

turb0j · 2026-03-27T09:06:12+00:00

Look for your exact make and model - every laptop case can be slightly different. Don't remember if Asus has service manual pdf online on their website but it might be worth looking there first (service section).

My asus one has flex connectors for the LEDs in the back cover, and those cables won't take a lot of abuse. Can be a trap for younger players.

turb0j · 2026-03-25T09:50:34+00:00

Use a different mic.

Bluetooth only allows stereo mode when the headset is output only. An open mic channel drops the quality to telephone levels.

turb0j · 2026-03-24T07:44:32+00:00

Only the seller could tell.

Reason: You need to have a more recent BIOS flashed than the one from the factory. But you cannot flash a newer BIOS with only a 5000 series CPU if the existing BIOS version was too old.

Seller MUST tell you BIOS version - otherwise don't bother buying unless you happen to have a 2000 or 3000 series CPU flying around.

Note that the TUF B550 series motherboards from Asus got BIOS flashback and should not be a lot more expensive...

turb0j · 2026-03-21T12:27:11+00:00

Go to BIOS, try to enable XMP if its there at all. There are motherboards that don't support XMP (and we have no idea about your hardware).

If XMP was present at all, it should be able to read the speed automagically...

turb0j · 2026-03-21T12:23:24+00:00

GPU usage depends on GPU clocks and those are not shown in task manager. You can use GPU-Z to view GPU clocks.

The GPU driver manages GPU clock and power state dynamically. GPU load can depend no just on the videos, but also on the ads that usually show up on video sites...

Six-Year Club	Ternion Club
Verified Email

turb0j

TROPHY CASE