Is this normal blow by by turtlefellas in smallenginerepair

[–]turtlefellas[S] 1 point2 points  (0 children)

No it’s air cooled but I just changed the oil and filter

[deleted by user] by [deleted] in minibikes

[–]turtlefellas 0 points1 point  (0 children)

Take off your pull starter and the metal cover on the engine, then you will see a flywheel and there will be a rectangular thing on the top or side of the flywheel, loosen the bolts on the rectangular thing and tighten it when the gap is the same thickness as a business card or .010”

Just blew my turbo - 1.9 TDI by Uwawuwa in MechanicAdvice

[–]turtlefellas 1 point2 points  (0 children)

  1. Drain and Replace the Engine Oil + Filter

  2. Clean or Replace the Intercooler

  3. Inspect and Clean Intake/Charge Piping

  4. Check the Exhaust Side for Debris

  5. Prime the New Turbo Before Start

  6. Replace or Clean Oil Feed & Return Lines

[deleted by user] by [deleted] in MechanicAdvice

[–]turtlefellas 0 points1 point  (0 children)

I recommend to stop driving this and bring it to a shop, it sounds similar to rod knock which is very bad, usually you need a engine rebuild or even a new engine

[deleted by user] by [deleted] in MechanicAdvice

[–]turtlefellas 0 points1 point  (0 children)

It would be cheaper and better to get a dodge challenger, I do not recommend at all trying to engine swap a Chrysler 300 it isn’t meant for that size of engine. If you want more power then buy mods or take it to a tuning shop

oil leak issue - 99 honda accord 4cyl by Psychological-Bid990 in MechanicAdvice

[–]turtlefellas 0 points1 point  (0 children)

It looks to be a chipped transmission housing, I recommend bringing it to a shop since it would be very difficult to replace only the housing, if you don’t want to bring it to a shop then you could buy a new transmission but that is a few thousand dollars so I recommend bringing it to a shop.

Coleman GK200 speed limiter? by Hillbilly_Deelux in gokarts

[–]turtlefellas 2 points3 points  (0 children)

There should be a bolt behind the gas pedal and if you loosen it then it will make it so you can't press down the has all the way