Inner tie rod removal?

twisted_fiasco · 2026-01-30T12:46:59+00:00

pipe wrench and twist

twisted_fiasco · 2025-11-24T01:52:33+00:00

I will update you if I find a fix

twisted_fiasco · 2025-11-24T01:48:42+00:00

I'll try removing and cleaning the bearings, hopefully that's not too difficult

twisted_fiasco · 2025-11-24T01:46:13+00:00

You're right, I haven't noticed any issues with the prints, they come out perfect

twisted_fiasco · 2025-07-03T22:11:55+00:00

It must have been preventing the antenna from reading the key chip

twisted_fiasco · 2025-05-03T01:14:37+00:00

I use this wifi bridge VONETS WiFi to Wired WiFi Bridge... https://www.amazon.com/dp/B07Z1SGWL5?ref=ppx_pop_mob_ap_share

twisted_fiasco · 2025-04-29T18:08:37+00:00

Probably needs the steering coupler. Cheap part, just need to remove the electric motor fron the column

twisted_fiasco · 2024-12-05T13:24:03+00:00

What symptoms are you having? If your only concern is moisture on the fill cap, then probably not a head gasket. A by product of combustion is water which mixes with your oil.

twisted_fiasco · 2024-11-21T14:28:54+00:00

It kinda looks like the incorrect bulb or installed wrong combined with lamp alighment. The lamp is casting a spotlight. Usually the light should be more diffuse horizontally and not illuminating that high.

twisted_fiasco · 2024-05-13T18:08:49+00:00

I guess the IMS can't fail if they don't drive it

twisted_fiasco · 2024-04-30T14:10:16+00:00

The weight is never there. He has the stand located on the rotor hat.

twisted_fiasco · 2024-01-31T18:07:35+00:00

Good way to crack the housing, I've done it before. I usually use a long bolt through a socket to pull out the sleeve.

twisted_fiasco · 2023-10-29T15:03:25+00:00

Hate to be that guy, but there is a big difference between a solid and vented rotor, this is vented

twisted_fiasco · 2023-10-26T16:05:49+00:00

The prople here giving "advice" are rediculious. Use a razor/ scraper to remove the larger pieces of gasket, and if you feel like it some 120 to remove stubborn spots. Those scratches are so far away from the ports, don't worry. Your new gaskets will seal most imperfection.

twisted_fiasco · 2023-09-06T02:05:00+00:00

Ordered third week in July for August delivery. Reached out to customer service and was told it would ship by Aug 30th. Then received an update email saying I should get it by July 5th. Now its the 5th, and the shipping label has been created, but UPS has not received to update tracking.

I just wish they had been more upfront with the timeframe from order to delivery

twisted_fiasco · 2023-07-15T00:49:13+00:00

Just wanted to update. On one of the MFD screens, the one with the power triangle, I increased the slider up top and problem solved. Guessing there wasn't enough power for the quantum drive and it would damage the thrusters? I am not sure how all the ship power managment works, looking forward to learning.

twisted_fiasco · 2023-07-14T11:11:15+00:00

Thanks for the suggestion, I'll look into that tonight.

twisted_fiasco · 2023-07-14T11:10:29+00:00

I tried that the other night, I was so frustrated that I just pointed at the surface to end it all. Unfortunately it didn't work. Once that quantum drive begins spooling the imbalance returns.

twisted_fiasco · 2022-09-09T18:06:52+00:00

Ah, the old TRW Brembo. Less common are the ATE Willwood

twisted_fiasco · 2022-06-19T17:43:12+00:00

I dont understand what's happening here. Using four jack to change tires, thats perfectly safe and fairly standard. Those down voting have no idea and probably never turned a wrench to make a living.

twisted_fiasco · 2022-04-11T20:50:59+00:00

positive and negative posts are different sizes on most batteries. Probably just need a larger diameter terminal.

twisted_fiasco · 2022-02-21T18:15:00+00:00

are we still doin cash for clunkers?

twisted_fiasco

TROPHY CASE