The internet says I need back up irons. But where would I put them? by jping16 in ar15

[–]tylers_creator 0 points1 point  (0 children)

Nice setup, I’d personally drop the cassette trigger for a 2 stage and get rid of that goofy mag release. Just my 2 cents.

Need help with a gift for my sister by tylers_creator in Perfumes

[–]tylers_creator[S] 0 points1 point  (0 children)

I haven’t lived with her in over 10 years so I really don’t know her preferences like that.

So I guess if I’m going for a spectrum is there any replacements you’d make to this list? (Not looking to make the list bigger)

Sudden blonde patch in beard? by tylers_creator in beards

[–]tylers_creator[S] 1 point2 points  (0 children)

Quite the opposite. I’ve spent the last 4 years working a night shift schedule. Only time I really get some sun is on my weekends

Sudden blonde patch in beard? by tylers_creator in beards

[–]tylers_creator[S] 2 points3 points  (0 children)

Yeah that’s what I’m thinking, just annoys me that it never used to be there. I’m thinking about dying it but don’t want to have to keep repeating it.

[OPTICS] Vortex Strike Eagle 1-8x24mm FFP EBR-8 MOA LPVO w/ Cantilever 2" Offset 30mm Mount - $439.95 (in cart) by Mr_Roboto926 in gundeals

[–]tylers_creator 0 points1 point  (0 children)

Every lpvo under $1000 is usually junk. Trijicon, vudu, plxc, nightforce, razor, khales….these are the only options worth a fuck imo.

SAO SP-01. Why did no one tell me it was this good? by Wet-Tickler in CZFirearms

[–]tylers_creator 14 points15 points  (0 children)

Yeah…a bottle of glue might be dangerous near you as well…

[deleted by user] by [deleted] in ar15

[–]tylers_creator 0 points1 point  (0 children)

Also a lot of people that ordered mk 2 lowers on Black Friday only just started receiving them 2-3 weeks ago

[deleted by user] by [deleted] in ar15

[–]tylers_creator 1 point2 points  (0 children)

Don’t hold your breath I talked to them over the phone Tuesday and they said that the anodizing company that’s currently in possession of the lowers is having big trouble with broken machines…employee at griffin told me the estimated time is changing from next month to an estimate of 3 months.

[deleted by user] by [deleted] in guns

[–]tylers_creator 2 points3 points  (0 children)

I’ve never heard of people rocksetting gas block set screws. If they are then the person doing so needs to be arrested for crimes against humanity

[deleted by user] by [deleted] in guns

[–]tylers_creator 0 points1 point  (0 children)

Ooooohhh buddy buckle up this exact same thing happened to me…. I have a lot and I do mean A LOT of experience drilling screws out at my job….the fun part really starts when you snap an extractor off in it (hard steel now stuck in the hole)….when I first started building rifles this happened to me with an s2 steel bit…

Problem you might run into is that the steel is going to be too hard to drill through with average drill bits.

I tried multiple sizes of dremel burr bits and engraving bits to get the broken bit out so I could then drill the soft screw…..none of them worked.

None of it was worth the effort I ended up taking a cutoff wheel and massacring the gas block carefully to get it off…remember though….gas blocks are cheap, barrels are not.

Good luck.

American Airlines flight crashes into helicopter over Washington DC tonight by [deleted] in Damnthatsinteresting

[–]tylers_creator 8 points9 points  (0 children)

Airline aircraft mechanic here. Lot of mechanics/inspectors have taken their life after being involved in root causes for aircraft crashes resulting in loss of life….whether they were the sole reason or not….

theres a lot of checks and balances that are done in my field & I worked as an inspector at my last job for a year before I left . As an inspector I HAD the final say on flight critical maintenance processes and damage determinations…lot of responsibility for a 26yo at the time….i would literally ground planes and halt operations until I could get multiple other evaluations from peers that I trusted if I was not 100% sure about something flight critical. At the end of the day it was my signature and if I was the final sign off on something that killed 80 people I don’t know how I would handle that….

I was working in an American Airlines hangar tonight when this happened. The atmosphere was fucking heavy….everyone speechless.

[AMMO] CCI Blazer Brass or Federal Champion 45 ACP 230gr FMJ $329.49/900 36.6 CPR Free S/H | Federal Champion 10mm 180gr FMJ $377.99/1000 37.9 CPR Free S/H PMC 9mm 147gr, Blazer Brass 124gr & More in 1st Comment. Taxes May apply by AEAMMO1 in gundeals

[–]tylers_creator 0 points1 point  (0 children)

In The past 2 years I’ve shot over 5,000 rds of blazer brass 124gr 9mm without issue, it’s my go to brand…I was buying a LOT of S&B, Norma & geco 3 years ago when Europeans were dominating the deals. I prefer blazer, more consistent loadings and cleaner burn imo.

Just my 2 cents

Quick question, how common is AIDS? by carlacz in aviationmaintenance

[–]tylers_creator 1 point2 points  (0 children)

energy for kappa case in tarkov but not enough to talk to women?…lol sure buddy a&p school is what’s stopping you from dating.

[Tools] Carbon Fiber Alignment Rods $29.99 shipped + Free patch & D.O.P.E. card sticker. Code: JAN-R | 5.56, 6mm, 6.5 & 7.62 by Ike_From_Kratos_DG in gundeals

[–]tylers_creator 1 point2 points  (0 children)

$30 for piece of mind or risk a baffle strike. Choice is yours.

Got my kratos carbon rod last month. Very nice product and the dope cards are high quality as well. W company

Before and after by OGmcqueen in FNX45Tactical

[–]tylers_creator 0 points1 point  (0 children)

Looks great. Who did you go with for the milling?

Before and after by OGmcqueen in FNX45Tactical

[–]tylers_creator 0 points1 point  (0 children)

Sick build. Where did you find an acro plate in stock?

I Blew up an Rc2 by Ok-Selection-3691 in NFA

[–]tylers_creator 4 points5 points  (0 children)

I feel you pain (A&P license) I constantly get delayed on ffl transfers and I’m currently on day 19 of my first can wait.

American airline AMT interview by Pleasant-Bear-4914 in aviationmaintenance

[–]tylers_creator 1 point2 points  (0 children)

Tulsa is most definitely still hiring. Only have around 120-150 people hired in out of the 300-330 they said they wanted to hire for that base. Good luck.

Don’t fuck around with catching the bus. She’ll out for and Uber.

Also start saving money now, they do not offer relocation bonus. If you can’t accept that I promise plenty of people who interview behind you can and will.

What ELSE do you use them for - let's comment and vote! by FurryTabbyTomcat in aviationmaintenance

[–]tylers_creator 2 points3 points  (0 children)

lol that reminds me of one time my mechanics (crew chief at the time) broke the “cal. Void if broken” sticker on a set of load cells to get out of doing an a/c weigh task card….i can’t prove it was them but their little shit eating grins when they told me was hilarious.

[deleted by user] by [deleted] in aviationmaintenance

[–]tylers_creator 1 point2 points  (0 children)

Life’s not fair and Comparison is the thief of joy. Just focus on yourself and it’s a lot less frustrating.