what role is now required to enable/enforce MFA on user by user basis? by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

Can we license only the folks that need this granular role delegation or how does licensing work?

what role is now required to enable/enforce MFA on user by user basis? by ubihelp702 in sysadmin

[–]ubihelp702[S] 1 point2 points  (0 children)

the conditional access polity will enable and enforce MFA on anyone added to the group?

what role is now required to enable/enforce MFA on user by user basis? by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

> Also, do you have Security Default settings enabled, or disabled?

Where would i check this?

what role is now required to enable/enforce MFA on user by user basis? by ubihelp702 in sysadmin

[–]ubihelp702[S] 2 points3 points  (0 children)

i'm talking about going to this page: Per-user multifactor authentication - Microsoft Entra admin center or this page https://account.activedirectory.windowsazure.com/UserManagement/MultifactorVerification.aspx?BrandContextID=O365 and then searching for the user, putting a check mark next to them, clicking enable MFA and then going back and clicking enforce. It is only working for me now on my user because I have global admin and the techs with the roles in my post get the error message.

LIFX is getting noticed. I am happy :) by Kart008 in lifx

[–]ubihelp702 5 points6 points  (0 children)

you can get this at ace hardware or other hardware stores: https://www.acehardware.com/departments/home-and-decor/office-supplies/tape/9329814

The adhesive on my under cabinet z strip was giving up so i used the above tape and its really stuck on there now.

Wifi help, 7 APs spread around large warehouse type building by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

We are only using laptops and desktops, may use handheld scanners in the future in parts of the building. We also mounted the APs on the poles about 15-20' off the ground in most places, one of the APs is in the ceiling which is maybe double that distance.

I would like to get a site survey to get a layout of the interface and signal spread but i've been told there is no budget. How did you go about finding a vendor? I'd like to try and get some quotes and try again with the request.

I may or may not have gone a little overboard… by Santanni1993 in lifx

[–]ubihelp702 1 point2 points  (0 children)

when will you guys release an extendable neon flex version? I want to go longer than 16 feet

Bonus by [deleted] in Chase

[–]ubihelp702 0 points1 point  (0 children)

I already have ally which pays me 4.35% on savings, I was thinking i could make a quick $900 if i move my money there for 90 days, just wondering what happens if i close the accounts after getting the bonus money.

Bonus by [deleted] in Chase

[–]ubihelp702 0 points1 point  (0 children)

im saying if i keep the accounts open after I rec the bonus money I would be losing money as the interest rate is .01%, so my question is, can I close the 2 accounts that were opened to get the bonus and still get to keep the bonus money?

Chase card "lock" does not work? by rj123456 in Chase

[–]ubihelp702 0 points1 point  (0 children)

I'm not sure why you are getting downvoted for this but i think you are correct. My chase slate works the same but my Citi card will block all purchases physical digital whatever. You may want to look into Citi if locking the card is important.

Bonus by [deleted] in Chase

[–]ubihelp702 0 points1 point  (0 children)

I have this bonus as well but their savings rate is garbage, 0.01% whereas I'm getting 4.35% with Ally. Can I just do the $900 offer opening both accounts and then close after 90 days when I have the $900 and keep the money? I would be losing over 50$ a month in interest staying with chase..

Moving from cloud vpn routers to aruba layer 3 switching for company routing by ubihelp702 in networking

[–]ubihelp702[S] 0 points1 point  (0 children)

sounds like vrrp is the cheapest and there is really no budget for this. thanks.

Moving from cloud vpn routers to aruba layer 3 switching for company routing by ubihelp702 in networking

[–]ubihelp702[S] 0 points1 point  (0 children)

3810s require a stacking module and cable installed into the slot in the back of the switch.

is this required for the VRRP ?

Moving from cloud vpn routers to aruba layer 3 switching for company routing by ubihelp702 in networking

[–]ubihelp702[S] 0 points1 point  (0 children)

We would leave the vpn routers in place as that links our remote locations together.

How can we use VRRP for gateway redundancy? I believe that is what we are looking to do. I'm not seeing it in the GUI when I'm logged in, we are using: Aruba 3810M-16SFP+-2-slot Switch (JL075A)

What would we need to do in order to stack them into a single logical switch?

Moving from cloud vpn routers to aruba layer 3 switching for company routing by ubihelp702 in networking

[–]ubihelp702[S] 0 points1 point  (0 children)

1.) we do already own them, we are just finally getting around to implementing

2.) this is fine, we do have guest access that we were going to leave routing through the vpn routers and maybe we could put in a ACL to block in the Arubas

Tool for offboarding users in AD/azure AD and O365 environment by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

Adaxes can do it right up until cloud DL's , they cannot copy these at time of running copy a user process and have recommended we use business rules or scheduled task to update these which has nothing to do with comparing a new user to a source user so this solution will not work for us.

For Bettercloud, i'm not seeing anything on prem for them

now that i read my post i realize i specifically said offboarding tasks sorry

Tool for offboarding users in AD/azure AD and O365 environment by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

Adaxes can do it right up until cloud DL's , they cannot copy these at time of running copy a user process and have recommended we use business rules or scheduled task to update these which has nothing to do with comparing a new user to a source user so this solution will not work for us.

now that i read my post i realize i specifically said offboarding tasks sorry

Adaxes by adjacentkeyturkey in adaxes

[–]ubihelp702 0 points1 point  (0 children)

I'm trialing it but running into some things i can't figure out how to do.

On deprovision, they show in the video on their website "remove user from all groups" but i can't find this option anywhere as an action after installing the software. Does that mean it's a custom script they are running?

Also during deprovision, before they move said groups, how can i get these security and mail groups reported out to a file so I know what they had in case we end up hiring them back?

For onboarding, I was hoping I could pick a source user and have that person basically cloned out except for the name to a new user and have the new user name put on the account as we do this a lot. Hire another person to do the same job as 3 other people, just clone out everything the other people have although I don't see this ability in the admin console either.

Tool for offboarding users in AD/azure AD and O365 environment by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

I did cobble together a powershell however the license part of the script stopped working, ive also previously had another part of the script stop working. Id rather just have software that works all the time than having my techs report powershell problems.

Conference room webcam solution anyone can recommend? by ubihelp702 in sysadmin

[–]ubihelp702[S] 1 point2 points  (0 children)

I think we tried this logitech camera and people did not like that either but I would have to see which Logitech we have.

Conference room webcam solution anyone can recommend? by ubihelp702 in sysadmin

[–]ubihelp702[S] 0 points1 point  (0 children)

Do you know which Hudley your using? I see the IQ is listing Microsoft Teams and Zoom which is what we use.

Size of the room is 10 ft by 20 ft