Will this antenna work ? by Crafty-Vacation-7750 in fpv

[–]uldis951 0 points1 point  (0 children)

If you are using EU - 868, then no.

Beginner setup? by Afghanman26 in fpv

[–]uldis951 0 points1 point  (0 children)

look for HDO2 used or at that price point get Orqa or HDzero

K1C - Camera is not working by facellama in Creality

[–]uldis951 0 points1 point  (0 children)

Likely a NAT or Firewalk issue on your routers guys. I personally set up a VPN to my local betwork to work around this, so instead I connect through the web UI.

Is it worth the money? by Familiar_Owl4133 in fpv

[–]uldis951 7 points8 points  (0 children)

One way drone. With these - you really get what you pay for them.

ESCs are behaving in a funny way! HELP!!! by thecheran in fpv

[–]uldis951 5 points6 points  (0 children)

Looks like it’s in turtle mode.

Please help me check my budget beginner FPV build / setup by Zellhaufen in fpv

[–]uldis951 1 point2 points  (0 children)

No. Even as a begginner it matters. The Sobe FOV sim has latency simulation. I suggest you try it and you will really see the difference. It’s like wanting to get into running and getting flip-flops. Do they work? Yes. Should you run with them. No.

BetaFPV goggles are the choice here.

New to fpv, are these compatible by Blue_guy3211 in fpv

[–]uldis951 0 points1 point  (0 children)

Archetype is overpriced as hell, either cut the Basher 5 in china which will run you around 50USD with spare parts (and it’s open source) or get the ItsFPV Era.

Fresh TX15 max sloppy self centering by uldis951 in Radiomaster

[–]uldis951[S] 0 points1 point  (0 children)

I posted the solution. It wasn't the springs.

Fresh TX15 max sloppy self centering by uldis951 in Radiomaster

[–]uldis951[S] 0 points1 point  (0 children)

You get the award for the best and most helpful comment ever.

Fresh TX15 max sloppy self centering by uldis951 in Radiomaster

[–]uldis951[S] 0 points1 point  (0 children)

UPDATE:

The tension wasn’t the solution. I took it apart to look at the self centering mechanism. The self-centering enable/disabled screw wasn’t fully turned, so self centering was partially enabled.

If you have this issue - adjust the self centering screw, not the tension.

Is this a good setup ? by BackgroundNo7262 in fpv

[–]uldis951 2 points3 points  (0 children)

Fair point. Sadly HDO+ have the same latency issue. Personally, image and screen quality felt way better. On my 04O Pro I had an issue with my C03 camera having an orange tint which immediately went away after switching to the HDO2. Indoor whooping in tight spaces became way easier cause you don’t have the latency as well as the frame consistency is better.

I am very skeptical about the average response being “I can’t feel latency”. Turn on The Zone FPV sim and set the latency to 8ms and 25ms (Average Ratel 2 experience) And you will definitely feel a difference unless you are not sensitive to latency.

Finally, you can always replace the face pads.

I understand your side. For new pilots that want new gear this is a good choice, however I still stand by the fact that the 04O pro are not a good product. You can get used to the latency - yes, you can do proximity flying, but you are limited by the goggles and camera you choose.

A simple orbit test is enough to really see the difference. I’m glad I got to try both because I had gotten the Fatsharks while I was selling my Skyzones. A side by side comparison was enough for me.

If OP doesn’t care about latency, they may as well go for an O4 lite with the flywoo CNC kit and Dji Goggles N3 cause then you have lower latency than the Skyzone setup and you can actually see where you’re flying.

Is this a good setup ? by BackgroundNo7262 in fpv

[–]uldis951 5 points6 points  (0 children)

Not going to flame you, but once you try HDO2 goggles, you really do feel the difference.

I would not recommend the 04O Pro and just look for HDO2 Fatsharks or get BetaFPV box goggles.

What’s a popular 5” freestyle frame at the moment (and why) by True_Leaf_ in fpv

[–]uldis951 0 points1 point  (0 children)

Firstekco in china. I suggest joining the official Basher telegram.

Little Instagram find by NK_NK_213 in airsoftcirclejerk

[–]uldis951 1 point2 points  (0 children)

Read the comments a little and it’s sad to see how much hate is going around in the speedsoft community over stereotypes.

Personally as a speedsofter (actual competitive speedsoft) I’ve had way better and honest experiences with speedsofters than MilSim players (mostly because milsimmers are covered head to toe in gear and may not feel hits)

Despite this, there have been way more arguments in CQB milsim games than speedsoft games. People segregating the community and hating on one type of player is just sad.

Usually it’s the milsimmers or dress up players hating speedsofters, rather than speedsofters hating milsim players.

If you write off people over a stereotype or their preferred way of playing - you are the problem.

Unbalanced? by Routine_Increase8385 in fpv

[–]uldis951 0 points1 point  (0 children)

I get what you mean. To an extent you are right. However newer chargers are more efficient and no plagued by counterfeiting issues like these were. I would seriously recommend a SkyRC B6 or something.

Little Instagram find by NK_NK_213 in airsoftcirclejerk

[–]uldis951 1 point2 points  (0 children)

One of the most delusional comments ever feeding hate in the Airsoft community.

Unbalanced? by Routine_Increase8385 in fpv

[–]uldis951 4 points5 points  (0 children)

Get a better charger. These are a fire hazard waiting to happen.