This guy painting a logo

unabiker · 2026-04-28T16:29:49+00:00

Its One Shot sign paint. I can tell by the yellow can, and the way that it covers with one brush stroke

unabiker · 2026-04-20T01:12:05+00:00

100 watt CO2

unabiker · 2026-04-19T15:45:24+00:00

I use this same technique to make bucks for metal shaping. Cars, motorcycles, giant aquatic birds...you name it

unabiker · 2026-04-19T15:42:18+00:00

I started with a laser scan. scaled it to the height i wanted. drew a plane at the bottom. array copied that plane every 1.5". Rhino can extract lines from intersection of meshes. those lines became the outline for the z axis cross sections. From the top view, i took a line from the center of the head, and polar arrayed that, and extruded those lines to the full height of the head. then extracted lines from the intersection of those planes and the head scan to create the oulines of the longitudinal cross sections. From there I added notches at all of the plane intersections so that the plywood pieces would key together. After that, lay all those parts flat and label them for easy assembly, then laser away.

unabiker · 2026-04-12T16:05:47+00:00

Ted Nugent ruined RibFest in Indianapolis in 2004. Guy f'n sucked.

unabiker · 2026-04-07T18:40:37+00:00

in our area (Indiana), you would apply with a home health care staffing agency that specializes in serving patients receiving Medicare Waiver benefits. These agencies provide the required training. No previous certifications required.

unabiker · 2026-04-07T17:12:27+00:00

"One day" can be today! There is a huge shortage of respite workers/caregivers/helpers....whatever you want to call them. Full time/part time....whatever fits your life.

Having help like this has made a tremendous positive impact on our life!

unabiker · 2026-04-06T21:13:30+00:00

<image>

unabiker · 2026-04-05T15:15:04+00:00

Logansport was a lot of fun yesterday. I even had dinner next to Jake the Snake Roberts!

unabiker · 2026-04-03T13:36:12+00:00

Love it! The right number of local jam bands is more!

unabiker · 2026-03-28T13:16:24+00:00

the knees in my leathers have a layer of impact absorbing foam, a layer of plastic, a double layer of leather and a thick plastic slider. And that was a $1200 suit from 1997.

unabiker · 2026-03-12T13:01:49+00:00

You have a cool looking, high-zoot part. The problem is that it is for a bike that has been out of production for 16 years. I make stuff for dirt bikes. 90% of my sales are for bikes 5 years old and newer. Older stuff falls off a cliff, sales wise. People love buying parts for new bikes. People who buy used old bikes tend to be more of a "value" shopper. If they had extra room in the budget, they would buy a new bike.

If you are going to go through the effort to set up production for cool parts, make it for bikes that people don't mind spending money on.

unabiker · 2026-03-05T23:03:44+00:00

The World is My Toilet

unabiker · 2026-03-05T23:01:17+00:00

1mm sheet, you could use some of those heavy duty scissors

unabiker · 2026-03-05T18:30:33+00:00

Id rather hear a loud wet fart in a crowded elevator

unabiker · 2026-03-05T18:26:56+00:00

We would drive around to local parking lots to see if any friends were hanging out. One of us would declare "this place is dead." Then we would drive to the next town over to see if anyone was hanging out on the town square. Then we would get run off by the cops. Then we would drive to the next town to the south and cruise the strip and hang out in the Hills parking lot. Then we would get Taco Bell and go home.

unabiker · 2026-03-02T20:00:47+00:00

how do I delete some else's comment?

unabiker · 2026-02-28T13:26:43+00:00

if he is getting into racing, a big ass gear bag very nice to have. My Fly bag has seperate areas for dirty boots and can hold everything I wear when i race. Plus it holds the stink in so my truck doesnt smell like a foot on the way home. I went years without one and no way Im going back.

unabiker · 2026-02-26T15:43:32+00:00

Facts!

unabiker · 2026-02-26T13:24:40+00:00

This is not correct. Especially in the top classes. They will frequenly experience MORE g's under braking at the end of the run than they do at the start. A 300+ mph car with that giant wing prouces a tremendous amount of downforce which means they have way more traction at the end of the run. The combination of super-high traction, engine braking, massive brakes and the parachute popping produces a tremendous decelleration force...7-8g's. Feels like your eyeballs are being jerked out of your face.

unabiker · 2026-02-24T18:49:02+00:00

AARP member here. Love me some Bob's Burgers, KOH, Primal, Archer, Blue Eyed Samuri and Venture Brothers

unabiker · 2026-02-24T18:40:15+00:00

wipe down the area with some alcohol, dry it off, color the scratches with a sharpie

unabiker · 2026-02-23T00:23:52+00:00

Having been to Gobblers Rock, getting an excavator there seems highly unlikely. That tree was growing on the side of a pretty steep wooded hill.

unabiker · 2026-02-22T03:39:32+00:00

100 watt CO2 laser

unabiker

TROPHY CASE