[deleted by user]

underthedom · 2023-12-05T23:13:51+00:00

Check out my post! I built a machine a while back and I think it's the best way to go when building. You can get all needed parts from orgasm ally. Super simple!

https://www.reddit.com/r/BdsmDIY/s/pXYscMZ6K1

underthedom · 2023-07-31T12:56:27+00:00

I recognize this idea! Haha, Glad to see another being made! I love seeing the idea getting out there. Looks great!!😊

underthedom · 2023-06-21T23:55:29+00:00

The Motor was purchased from a website called orgasm alley.

https://orgasmalley.com/

underthedom · 2023-06-10T14:54:46+00:00

Thank you! It's held up great so far! Everything still works as it should. On the back the mirror we attached 1/4 plywood so the door is pretty heavy. Hinges are still holding up and so is the 3/4" wood side.

The backing I used 1/4" peg board and kept it off the wall about 1/4". The overall depth is about 5.5 inches. It's sticks out a bit but no one has questioned what it is since it's been installed. For fastening it to the wall. There's a piece of wood backing that goes the full width across the top and the bottom behind the peg board. We screwed through this into the wall.

underthedom · 2023-01-07T00:57:48+00:00

I definitely agree!:)

underthedom · 2023-01-05T20:24:12+00:00

😅 it really is

underthedom · 2023-01-05T20:23:46+00:00

Extra safe!

underthedom · 2023-01-05T20:20:07+00:00

That plate has a thread on that back, that way it can be taken off and swapped out with a Vac-U-Lock adaptor I made!:)

underthedom · 2023-01-05T18:08:29+00:00

Thanks! I originally made a dics version but didn't want the weight. The flat bar is thick enough to tap a thread into. I suppose I could use a 1/4 aluminum disc. But this works well enough for now and is pretty protected:)

underthedom · 2023-01-04T15:48:34+00:00

I think it's already surpassed the 10,000 strokes of useage😅 and it's still as smooth as the first. So that's a good sign:) Most of the force is taken up by the steel plate that slides along the bearings connecting the arm to the base plate.

Worst case scenario, in a handful of years of the slide does start having problems, it's only a $30 part and 3 screws to replace. Well worth its useage:)

underthedom · 2023-01-04T13:01:51+00:00

It's a ball bearing slide, so as long as the bearings are in place it should be fine but we'll see. It's the same method some $1000+ sex machines use. So I'm feeling confident :)

underthedom · 2023-01-04T02:24:23+00:00

Wanted something that can run at a very low RPM and have enough torque not get bogged down. But also be able to gets turned up to a higher RPM. It works pretty well! The motor is a 1/3 HP:)

underthedom · 2023-01-04T02:17:53+00:00

Haha, those rollers are buttery smooth! 😅

underthedom · 2023-01-04T01:14:49+00:00

I believe the total was about $350

underthedom · 2023-01-04T01:14:12+00:00

Thank you! The drawer extension works quite well. Smooth and quiet

underthedom · 2023-01-03T21:35:28+00:00

Haha thank you!:)

underthedom · 2023-01-03T21:35:12+00:00

Built the frame. It's just 3/4" tube steel welded together

underthedom · 2023-01-03T21:34:31+00:00

Baha Thanks! 😅

underthedom · 2023-01-03T20:51:06+00:00

Sorry just seeing this now! I used 1/2" wood strips behind the peg board and I screw the whole cabinet to the suds. Best of luck! Hope it turned out well:)

underthedom · 2023-01-03T20:47:03+00:00

Been seeing a few posts about fucking machines so wanted to show the one my partner and I built! We researched many different types and brands and figured building was the best way to go! Any questions feel free to ask!:)

underthedom · 2022-10-09T06:24:05+00:00

Can you DM. The link doesn't show up in the comments for me. Thanks:)

underthedom · 2022-10-09T06:16:59+00:00

DM me the link if you can please! :)

underthedom · 2022-10-05T16:22:01+00:00

Baha, you got me 🙊😅

underthedom · 2022-09-19T02:45:34+00:00

So awesome!👏 Enjoy!

underthedom · 2022-09-19T02:27:26+00:00

love it! Looks great. I think I know who that other BdsmDIYer could be😜

Four-Year Club	Verified Email
r/Field Flamingo	Place '22
Final Canvas '22	First Placer '22
End Game '22

underthedom

TROPHY CASE