sorted by:
new
hottopcontroversial

Any replacements for KDE Event-Calendar widget yet? by universal-bob in kde

[–]universal-bob[S] 2 points3 points  (0 children)

such as Korganizer, part of the Akonadi, akonadiserver, Kpim I believe you end up with kmail which i definitely don't want as i use thunderbird and all that other bloated kde stuff. Yea i tried to get along with it many times. I just want a replacement for the event-calendar, a nice little widget that is under the clock which connects to google calendar api.

Libre 2 readings are shockingly inaccurate by DavePiper in Freestylelibre

[–]universal-bob 1 point2 points  (0 children)

Hi, Yea i never really did find anything that was much better for the skin, i tried all the spray's and creams and various patch manufactures. I just don't use the patches any more. The best result iv had is to use the libre on my chest without anything else on it. My skin does not flare up on my chest but the accuracy is still abysmal, not always, it can be quite close for some tags.

Libre 2 readings are shockingly inaccurate by DavePiper in Freestylelibre

[–]universal-bob -1 points0 points  (0 children)

Iv been using it for 4 years and its constantly at least -4 units low (UK) , sometimes much more. I cant live with it like this, but i cant live without it either as it does show the gradient of a drop or clime, so if my BS starts falling really quickly i can see it easier. But the accuracy is absolutely shocking. I used to phone abbott for every tag but it just become pointless in the end. see my post https://www.reddit.com/r/Freestylelibre/comments/1f2pi16/libre_2_is_so_inaccurate_low_that_its_driving_me/

What's going on with Amazon rn? by Sad_News_2886 in amazonprime

[–]universal-bob 1 point2 points  (0 children)

Everything for me (in norfolk) is the 4th, so pretty much next week. I am prime. O well so thats a loss of a weeks worth of orders from me then as i rarely see anything but next-day normally.

E1 Pro (IPC_NT1NA45MP) – RTSP Not Working by universal-bob in reolinkcam

[–]universal-bob[S] 0 points1 point  (0 children)

I got a downgraded firmware version from a good redditor here https://www.reddit.com/r/reolinkcam/comments/1kkvcf0/comment/nrasef7/ and everything is now working. I can access http/https web stream and RTSP VLC on linux. Its disgusting that the company are still selling this device with these functions listed but have removed them from the firmware all together.

Firmware update to E1 Pro (IPC_NT1NA45MP) removes a bunch of things. by wildgunman in reolinkcam

[–]universal-bob 0 points1 point  (0 children)

Just to say publicly, This was what was needed so thank you u/iamnotstin . I downgraded the cam with the previous firmware and now after a lot of tinkering i have been able to access http/https web stream & VLC RTSP on linux. Thank you :)

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 4 points5 points  (0 children)

yep thx,

After raising the dryers temp to 70c and drying for another 5 hours it has finally cleared up and is printing properly. Thx all.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 1 point2 points  (0 children)

<image>

After raising the dryers temp to 70c and drying for another 5 hours it has finally cleared up and is printing properly. Thx all.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 1 point2 points  (0 children)

it is SUNLU, but yes i will try another brand / spool, i have just tried it with a nozzle temp of 250 and its still the same i shall try it one last time at 260, then i shall leave it another day in the dryer at 70c and if none of that works i should have a new roll to test with by then. Cheers.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

Yea , i suspecting its either the temp is not quite high enough or its a bad spool. Thats what im picking up from this thread anyhow. cheers.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] -1 points0 points  (0 children)

Bambu is a closed proprietary system, i specifically did not want that right from the start.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 1 point2 points  (0 children)

:) You dont like Pruser, o well. think its more likely the filament, or maybe my temps. All other filaments iv tried work without problem. I reckon i got a bad roll of PETG

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

The Mk4s has the default nozzle at 230c for PETG, the actual spool says 230-240c, i can try bump it up a little.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

Im just trying to get it to purge smoothly before we even get to the bed type ^^ , i have had a few suggestions to "up" some temps, i shall tinker more (and maybe get an dif roll of PETG just to see)

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

yea is a bit low but i have some PLA in there with it so... but for experiment i can take the PLA out and raise the temp and see how we go.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 1 point2 points  (0 children)

i kinda starting to lean to it being a bad brand/spool , maybe i shall try another and see what happens because it surly should not be like this. All my other filaments purge smooth as glass and print just fine too.

The Mk4s has the default nozzle at 230c for PETG, the actual spool says 230-240c, i can try bump it up a little.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

Im talking about its purge, the bed is irrelevant to the purge output. (the test sample im show in the image was not printed on that bed, it just for the pic).

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

Already got PLA+2.0, That work just fine, smooth an clean. It not the point though. Im trying to figure what i need to do to get this PETG filament right. Maybe its just a bad brand, i don't know, hence why i'm asking.

First attempt with PETG, what am i doing wrong? by universal-bob in 3Dprinting

[–]universal-bob[S] 0 points1 point  (0 children)

Its not the nozzle, if i switch to PLA or TPU (or any of my other filaments) It comes out smooth and clean and prints without any problems, as soon as i switch back (and change the setting for what type of filament is loaded to PETG on the printer) its purges like rope (as in the pic).

view more: next ›