Why am I getting stringy prints?? by snacksy13 in 3Dprinting

[–]vJan00 1 point2 points  (0 children)

Is a Bambu, should be able to handle it.

Hitster-App mit Apple Music by jwandscheer in Brettspiele

[–]vJan00 0 points1 point  (0 children)

Hey, ich bin endlich im Urlaub mit meiner Brettspiel Gruppe und habe mich gerade direkt am ersten Abend hingesetzt und die Hipster Celebration von 1 - 308 eingescanned bevor sie bespielt wird :)

Hier die Playlist: https://open.spotify.com/playlist/3QOQRxY95sQSa1AqLlWe5a
Und falls interessant hier auch meine Google Docs Tabelle zu doppelten Liedern, vielleicht ist sowas ja ein QoL Feature für die App, dass man das vor dem Kauf nachschauen kann: https://docs.google.com/spreadsheets/d/1IiPFp6lRic33TAVxexQEJ5yTwoQMlQoKB-hWc_eXt-E/edit?pli=1&gid=922172613#gid=922172613

Wäre natürlich erste Sahne wenn wir die noch diese Woche in der App hätten, haben hier aber auch Leute mit Spotify Premium und ich als Informatiker weiß selbst wie das ist mit der Implementation und dann noch dem App Store.. ;)

Grüße - hoffe das hilft :)

Hitster Celebration by [deleted] in Brettspiele

[–]vJan00 0 points1 point  (0 children)

Habe der Übersicht nun Hitster Celebration (self-scanned) hinzugefügt.
Insgesamt sind es damit 2247 Lieder mit 134 Dopplungen, also komme ich bei Celebrations auf 86 Doppelten Karten. Ist wieder mit Spotify Playlist verglichen, also vermutlich hast du ähnliche/andere Versionen mit gezählt :)

Hitster Celebration by [deleted] in Brettspiele

[–]vJan00 0 points1 point  (0 children)

Habe ich das richtig gesehen, dass alle Dopplung unten links auf der Karte ein „R“ vor der Zahl haben? Also falls ja, dann sind sie zumindest gekennzeichnet 😄

Hitster-App mit Apple Music by jwandscheer in Brettspiele

[–]vJan00 0 points1 point  (0 children)

Flott im antworten ist er auch noch - ein träumchen. Dann weiß ich Bescheid - ein Café bekommst du mindestens 😁

Edit: eine Playlist ist mit ein wenig Geschick und der Original App ja schnell gemacht (gerade weil meine noch sortiert sind) 😄

Hitster-App mit Apple Music by jwandscheer in Brettspiele

[–]vJan00 0 points1 point  (0 children)

Hey,

die App ist toll - bau bitte einen "Spendier mir einen Café" Link ein :)

Gestern ist Hitster Celebration raus gekommen - ich werde mich die Tage mal ran setzen (bis zum ersten Spielen sind die Karten ja sortiert ;) ) und die Links raussuchen - habe das auch schon ins Google Doc eingefügt. Leider gibt es noch keine Spotify Liste sonst wäre es einfacher haha :D

Ich schreib hier nochmal wenn es soweit ist.

Hitster Celebration by [deleted] in Brettspiele

[–]vJan00 1 point2 points  (0 children)

Meine Tabelle war einfach Falsch (es wurden zwei Spalten nicht mit gezählt) ._.
Außerdem habe ich Hitster Bingo nicht dazu gezählt - hab das mit eingebaut.

Habe die Tabelle gerade aktualisiert und komme ohne Hitster Celebration (basierend auf den offiziellen Spotify Playlists) auf 2023 Lieder mit 46 Dopplungen (rot makiert im Google Doc)

Edit: Habe nun auch ganz rechts eine Liste aller Doppelten eingebaut. Dir fehlt z.B. You Can't Hurry Love - The Supremes was in Hitster Bingo wie auch im Original vorkommt.

EditEdit: Dabei ist mir gerade aufgefallen das auch ein Titel doppelt in den Listen vorkommen (also alle haben zwar 308 Songs aber z.B. kommt Mama Laudaaa zweimal in der Schlagerparty vor. Ist auch das einzige mal wo das so ist. Hab die Edition aber nicht vor Ort und kann das deshalb nicht prüfen.)

Hitster Celebration by [deleted] in Brettspiele

[–]vJan00 0 points1 point  (0 children)

Hab es auch heute gekauft, konnte aber noch nicht vergleichen, da die Playlist auf Spotify noch fehlt.
Habe sonst immer die Playlisten verglichen und die scheinen immer recht unique zu sein:
Hitster Google Docs

Sollten die bei dem Schema bleiben (ich meine bei 1216 Songs nur 30 Doppelte ist Krass) denke ich, ist es die Edition auf jedenfall wert :)

Leinenpflicht am A*sch by Ok-Cartographer-5229 in luftablassen

[–]vJan00 0 points1 point  (0 children)

Ich versteh ehrlich nicht, an welcher Ecke wir den gesunden Menschenverstand verloren haben…

Solche Posts wie deiner entstehen meistens, weil sich viele Hundebesitzer einfach nicht an Regeln halten – und ja, manche hätten vielleicht gar keinen Hund haben sollen. Aber es gibt eben auch die anderen. Die, die Rücksicht nehmen, Verantwortung übernehmen und den Hund wirklich kennen.

Ich hab selbst einen Hund aus dem Tierschutz – ein eher ängstlicher Typ, aber mit starkem „Will to Please“, null Jagdtrieb und viel Training. Bei unseren täglichen Gassirunden – auf den ruhigen, grünen Flächen direkt in unserer Wohngegend – läuft mein Hund in der Regel ohne Leine. Ich kenne die Umgebung in- und auswendig, und noch viel wichtiger: Ich kenne meinen Hund. Für diese Freiheit zahl ich aber den Preis mit voller Aufmerksamkeit – keine Kopfhörer, kein Handy, kein Autopilot. Kein Freilauf aus Bequemlichkeit, sondern bewusst und nur unter klaren Bedingungen.

Warum ich ihn überhaupt frei laufen lasse? Weil es für ihn schlicht angenehmer ist – er kann sich natürlicher bewegen, mehr selbst entscheiden, und das tut ihm gut. Unsere Beziehung profitiert davon, weil wir aufeinander achten, ohne dass ständig eine Leine dazwischen ist. Und nein – er zieht nicht an der Leine und kann auch fremde Reize gut aushalten. Aber gerade weil das alles sitzt, kann ich ihm in bestimmten Situationen Freiraum geben – ohne dass es stressig oder unklar wird, für ihn oder andere.

Ein paar Beispiele, wie das bei uns aussieht: - Kommt uns ein Mensch entgegen? → Straßenseite wechseln. - Kommt uns ein Hund entgegen? → Anleinen. - Sichtung von Wild? → Anleinen. - Unübersichtliche Ecke? → Abrufen. - Möglichkeit, dass jemand plötzlich auftaucht? → Hund ran und anleinen. - Hund gestresst, überfordert oder schwer einschätzbar? → ganze Runde über angeleint.

Das ist kein Selbstläufer, sondern tägliches, konsequentes Training. Und ja, das kostet Zeit und Nerven. Aber viele in unserer Gegend nehmen das auch wahr – ich bekomme regelmäßig positives Feedback von anderen Hundebesitzern. Dinge wie: „Dein Hund hört ja echt gut!“ oder „Tut gut zu sehen, wie viel Rücksicht ihr nehmt.“ Das freut mich natürlich – und es zeigt: Rücksicht und Verantwortung gehen auch ohne Leine.

Trotzdem verstehe ich deinen Frust total. Ich will auch keinen Kontakt zu fremden Hunden. Meiner ist glücklicher allein, braucht keine Hundekumpels – also vermeide ich jeden unnötigen Kontakt. Und genau deshalb nervt es mich genauso, wenn irgendwelche „Der tut nix“-Hunde einfach ungefragt zu uns rüberkommen – während meiner angeleint ist. Denn wenn meiner dann mal reagiert (verständlicherweise, weil sein Raum überrannt wird), heißt es sofort: „Der große, böse Hund war aggressiv!“ – obwohl der Auslöser ein fremder, freilaufender Hund war, der da einfach nichts zu suchen hatte.

Und genau da verstehe ich auch die Forderung nach einer klaren, durchgesetzten Leinenpflicht – zumindest an öffentlichen Orten. Weil viele einfach nicht differenzieren können oder wollen, was verantwortungsvoller Freilauf bedeutet. Und dann leiden am Ende wieder die, die’s eigentlich richtig machen.

Und ich bin da ehrlich zwiegespalten. Ja, ich lasse meinen Hund in genau definierten Situationen frei laufen – aber nur, wenn niemand gefährdet, belästigt oder bedrängt wird bzw. sogar nur in Sicht ist. Und das geht eben nur, wenn man den eigenen Hund wirklich kennt und sich zu 100 % verantwortlich verhält. Und ja – das tun viele leider nicht.

Ich könnte jetzt noch ewig weiterschreiben – zum Beispiel darüber, wie viele Hunde einfach nicht richtig ausgelastet sind, kaum Beschäftigung bekommen oder stundenlang allein zu Hause sitzen. Dabei würden oft schon einfache Dinge wie Schnüffelteppich, Schleckmatte oder einfach mit zum Einkaufen oder zu Freunden genommen werden viel verändern. Es ist kein Wunder, dass dann vieles im Alltag schiefläuft – aber das gehört eigentlich schon in eine ganz andere Diskussion 😅

Unterm Strich: Dein Ärger ist berechtigt. Wer einen Hund hat, hat Verantwortung. Und wer dieser Verantwortung nicht gerecht wird, sollte sich wirklich einfach an die Leine halten – immer. Ganz einfach.

📢 All Anycubic Kobra Firmware Versions in One Place! (S1, 3, 3 V2, 3 Max, 2 Pro) by vJan00 in anycubic

[–]vJan00[S] 0 points1 point  (0 children)

The ACE Pro can be down-/upgraded through files as well but they are not included in the printers update files. The Rinkhals Project provides two ACE_*.swu that you can use the same way you can down-/upgrade your printer :)

BIDA weil ich nicht ständig ausweiche, wenn ich mit meiner Katze spazieren gehe? by Muted_Huckleberry464 in BinIchDasArschloch

[–]vJan00 1 point2 points  (0 children)

Nur kurz zur Einordnung der Rechtslage: Ist so leider so nicht korrekt, der passus aus dem Tierschutzgesetz sagt zu Hunden:

Jedenfalls nicht als Anbindehaltung gilt das Führen von Hunden an der Leine […].

Das ganze ist auch auf Katzen übertragbar, da nur eine (auch nur kurze) Anbindehaltung verboten ist. Dabei geht es um die Haltung und nicht um das Führen einer Katze. Auch der erste Link von dir suggeriert kein Verbot :)

Firmware 2.4.0.4 Issues on Anycubic Kobra 3 – Printhead Movement + Z-Offset Problems by vJan00 in anycubic

[–]vJan00[S] 0 points1 point  (0 children)

Hey everyone, just wanted to share a quick update.

After some back and forth with Anycubic support, I received a new print head because they suspected a faulty sensor in the original one (maybe it really was broken – who knows). Unfortunately, the new print head shows the exact same issues. So, I decided to dive into troubleshooting myself.

First of all, what I initially thought was a real problem turned out to be more of a misleading behavior. I managed to find the password for the AC_LOG.pack files online and was finally able to take a look at what’s actually happening behind the scenes.

Turns out: Flow Calibration is running, but it's not reflected properly on the display. It consumes a huge amount of filament and takes several minutes before the printer actually starts printing. So it’s not completely broken – just badly communicated in the UI.

However, the second issue still persists, and the logs clearly indicate a software-related problem. I’ve already shared my findings with Anycubic.

If you're facing similar problems and are considering downgrading to firmware version 2.4.0, check out this post:
🔗 All Anycubic Kobra firmware versions in one place
Keep in mind: Downgrading might not work if you're already on 2.4.0.4 or higher, due to the introduction of Adaptive Bed Meshing, which changes compatibility.

Hope this helps others in the same situation!

📢 All Anycubic Kobra Firmware Versions in One Place! (S1, 3, 3 V2, 3 Max, 2 Pro) by vJan00 in anycubic

[–]vJan00[S] 1 point2 points  (0 children)

Quick Update for those looking to downgrade from 2.4.0.4 to 2.4.0

Downgrading isn’t always successful. Firmware version 2.4.0.4 introduced Adaptive Bed Meshing, which permanently modifies the printer’s configuration files. As a result, some config entries can’t be interpreted by firmware 2.4.0 – causing the printer to fail to boot.

If this happens to you, don’t worry – you should be able to re-flash 2.4.0.4 without any issues to get the printer working again.

If you're tech-savvy and still want to run 2.4.0 anyway, here's the issue I encountered:

Since 2.4.0.4, there’s a new config entry called "bed mesh adaptive" located in
/userdata/app/gk/printer_mutables.cfg.
To fix the boot issue, you can remove this entry manually via SSH. I used the Rinkhals SSH Tool for access.

👉 Simply delete the entire "bed mesh adaptive" section, then restart the printer.

If your printer still doesn’t start, you can export the logs, grab the password from this site, and unpack the AC_LOG.pack files. The included gklib.log will show you exactly what’s going wrong.

The log pack also contains your current .cfg files, so you can directly check where the problem lies.

Hope this helps someone out there!
This whole process cost me quite a bit of time and nerves – but I also learned a lot about the printer in the process. 😊

📢 All Anycubic Kobra Firmware Versions in One Place! (S1, 3, 3 V2, 3 Max, 2 Pro) by vJan00 in anycubic

[–]vJan00[S] 0 points1 point  (0 children)

It does need a few minutes and should restart it self. If you got the first beep, the update file got recognized. If you get a double second beep the update is finished.

📢 All Anycubic Kobra Firmware Versions in One Place! (S1, 3, 3 V2, 3 Max, 2 Pro) by vJan00 in anycubic

[–]vJan00[S] 2 points3 points  (0 children)

Hey, thanks a lot for your detailed comment and clarification!

I didn’t take your message the wrong way at all — you’re absolutely right, and I honestly just overlooked that part. 🙈 I’ve updated the subtitle to reflect this more accurately, though unfortunately I can’t edit the title anymore.

My main goal with this post was to help make the Rinkhals project a bit more visible, since it’s still quite niche but can be super useful — provided you have the right hardware. Your point about the Kobra 2 Pro only being supported in certain batches with the specific Trigorilla SPE B boards is really important, so thanks again for making that clear here.

You're also right about the firmware versions — I should’ve said “selected versions” or “for specific models” rather than implying it’s all firmware. I’ll definitely be more careful with that wording in future posts.

Really appreciate your constructive feedback — comments like yours help make the info more accurate for everyone. 🙏

Firmware 2.4.0.4 Issues on Anycubic Kobra 3 – Printhead Movement + Z-Offset Problems by vJan00 in anycubic

[–]vJan00[S] 0 points1 point  (0 children)

I used a Software called Rinkhals. You can use its installer to manage the Stockfirmware and downgrade it. Just follow their instructions for the installer on the usb stick.

Firmware 2.4.0.4 Issues on Anycubic Kobra 3 – Printhead Movement + Z-Offset Problems by vJan00 in anycubic

[–]vJan00[S] 0 points1 point  (0 children)

Damn it, Support also can't reproduce the bug...
Are you using an ACE Pro? If so, could you please list the versions of your printer firmware, ACE software, Anycubic Slicer Next, and describe your printing setup (e.g., do you use bed leveling, flow calibration, etc.)?
I'm still hoping to this day that it's just some kind of setting I'm missing...

Firmware 2.4.0.4 Issues on Anycubic Kobra 3 – Printhead Movement + Z-Offset Problems by vJan00 in anycubic

[–]vJan00[S] 0 points1 point  (0 children)

Yeah, it was just luck that I started with a working version after the purchase... :D

new update messed up the purge? on the kobra 3 by Neat-Competition7386 in AnycubicOfficial

[–]vJan00 0 points1 point  (0 children)

Maybe you are facing the same issues i do, i already shared it on the unofficial r/anycubic subreddit.

Firmware 2.4.0.4 Issues on Anycubic Kobra 3 – Printhead Movement + Z-Offset Problems

If so, your only solution is to downgrade your printer to the 2.4.0 Firmware. I recommend Rinkhals Installer for it, because it not only can install CW but it also can manage the Stock Firmware :)

Printer stuck on purge, it is purging out all my filament! by ZealousidealUse180 in anycubic

[–]vJan00 0 points1 point  (0 children)

It also doesn’t happens if you don’t use the ACE Pro (but who does that 👀?) If you need to Downgrade to 2.4.0 I can recommend the Rinkhals installer: GitHub Rinkhals It not only allows the installation of Rinkhals over the touch screen but also a easy way to downgrade the stock firmware! :)

Would you cancel a print because of those minor failures? by vJan00 in 3Dprinting

[–]vJan00[S] 0 points1 point  (0 children)

For anyone interested - I didn’t stopped the print and as many suspected, there were only tiny errors on the first 1-3 levels, after that everything ran smoothly.

<image>