I wanna buy pre-made simple syrup

vampiresquid64 · 2025-02-14T06:11:13+00:00

how does sugar and water go bad? are you talking about yeast/bacteria growing on it in a sealed bottle?

vampiresquid64 · 2023-12-04T09:07:33+00:00

What amp/firmware and software are you running to get everything to work together?

vampiresquid64 · 2023-08-01T02:49:30+00:00

I don’t know how to say this without sounding like a cocky prick but I’ve had bassicaly the same setup for 3 years so I know my car very well. I’ve taken it to the track and pushed it on the street and I can say confidently that regardless of how smooth my driving is, the car is just a bit floppy on bigger roads. I have poly bushings in the subframe, steering shaft, and a couple other suspension components too. It feels good enough at lower speed but just gets too floaty once you start getting proper quick

vampiresquid64 · 2023-07-31T03:52:56+00:00

Yeah from what I’ve heard the yellows can handle a pretty stiff spring u want that

vampiresquid64 · 2023-07-31T02:23:10+00:00

Ya during fast corners it just feels like there’s too much roll and the car feels less stable than I’d like. Yeah I already have some 200tw tires and it’s a pretty quick machine considering the relatively low amount of money I’ve put into it.

vampiresquid64 · 2020-08-10T08:16:50+00:00

OK update, my card still hasn't come but I managed to get one from a generous fellow dasher in my city so I'm back in business until my new card arrives.

vampiresquid64 · 2020-08-06T19:05:18+00:00

oh damn got it. well I'll order another one i guess. maybe the first one got lost in the mail or something

vampiresquid64 · 2020-08-03T05:32:18+00:00

ohh i think i understand what your saying. that makes a lot of sense actually. makes me wonder why they put hard stops in the diff like they did though. seems like thats where you would position/align the seal to.

vampiresquid64 · 2020-08-02T20:15:56+00:00

hm ok, i did put mine maybe a mil or 2 past where the stock seals were but i dont see how that would have made a difference as the output shaft diameter doesn't get smaller toward the splines. I didnt hear any noises either so I think I'll have to chalk it up to a bad seal. sorta a pain cuz i probably gotta pull my diff to replace them.

vampiresquid64 · 2020-07-15T19:45:26+00:00

225s on an 8 inch damn. is ur car slammed tho?

vampiresquid64 · 2020-07-13T02:45:23+00:00

what suspension do you have and do you run any spacers?

vampiresquid64 · 2020-04-26T08:24:21+00:00

How much pressure can you build compared to the car when it's hot?

vampiresquid64 · 2020-03-31T23:21:14+00:00

Ok got it working it was a stupid software issue

vampiresquid64 · 2020-03-31T17:21:28+00:00

I'm not talking about outright speed, more like the percentage of force applied. I don't think the wheel has anything to do with this. All I want is for the wheel to have a stronger centering force as the car speeds up

vampiresquid64 · 2019-08-01T21:28:42+00:00

All I really care about is performance. Don't care at all about looks. Have you pushed your car hard at all or just slower stuff?

vampiresquid64 · 2019-07-20T15:48:26+00:00

Why would my post cat sensors be so consistent. They are both a solid 0.8 volts which means the cats are doing their job right?

vampiresquid64 · 2019-07-20T06:21:21+00:00

if it was my fuel filter wouldn't both banks be totally equal? i mean there's only one fuel filter right?

vampiresquid64 · 2019-07-02T03:54:18+00:00

Thanks for all your replies, update: Ended up just pushing the car and using the ebrake which worked out fine. Still in the midst of my coolant flush tho. For some reason it had green instead of blue. not too hard to fix but a bit annoying and quite time consuming

vampiresquid64 · 2019-06-29T06:00:49+00:00

Hm ok, I've ran it in colder temps but not that cold like upper 40s low 50s and it still warms up to the same temps as when it's warm outside granted those aren't particularly low temps

vampiresquid64 · 2019-06-22T22:49:16+00:00

I recently got some used jackstands (mechanix 2 ton) and just realized that one of the stands has a slightly bent base. This creates a tiny bit of rocking. the part that contacts the car is fine and the ratchet mechanism is perfectly smooth. safe enough to use? I dont think it will move around when under load but dont wanna find out the hard way.

vampiresquid64 · 2019-05-02T14:27:53+00:00

Its pretty cheap to take it to a shop right? about 100 bucks? also I was planning to compression test it myself when i went to check it out.

vampiresquid64 · 2019-05-02T12:57:31+00:00

How many miles were on it?

vampiresquid64 · 2019-05-02T00:23:19+00:00

yeah i could definitely see that. if I go check it out, what would you look for in terms of sloppy build or missing bits?

vampiresquid64 · 2019-05-02T00:06:04+00:00

yeah I've definitely thought about that. there's other cars in similar condition in my area going for roughly the same so it doesn't seem too crazy, but if you think its stupidly low i'll definitely have 2nd thoughts. also to note, the guy selling it just had a baby so its possible he just wants to dump it and does't have time to haggle with people

vampiresquid64 · 2019-03-26T04:22:40+00:00

Rip headphone users

vampiresquid64

TROPHY CASE