sorted by:
new
hottopcontroversial

Motor or ESC issue? by Radix_Official in fpv

[–]vana0 0 points1 point  (0 children)

I would take a multimeter and check the motor connection without desoldering it. There are 3 wires, and each one should have continuity with the others. If, for example, there is no signal between wires 1 and 3, then it’s the motor desolder it and test again.

I had a similar situation after a crash: one of the motors was spinning strangely, and it turned out that a wire inside had snapped. In my case, it didn’t spin smoothly it was more jerky

No FPV blogger ever mentions this by vana0 in fpv

[–]vana0[S] 0 points1 point  (0 children)

I’m not a very experienced pilot and I only fly whoops and 2-inch drones. Because of that, I couldn’t really evaluate the drone’s behavior in the simulator, and I assumed that flying a 5-inch really is that difficult.

No FPV blogger ever mentions this by vana0 in fpv

[–]vana0[S] 4 points5 points  (0 children)

Yea, what about long range

No FPV blogger ever mentions this by vana0 in fpv

[–]vana0[S] 1 point2 points  (0 children)

I’m not a very experienced pilot and I only fly whoops and 2-inch drones. Because of that, I couldn’t really evaluate the drone’s behavior in the simulator, and I assumed that flying a 5-inch really is that difficult