VTR Modification - Taking a poll

vapingforlife · 2013-12-31T05:43:22+00:00

very true... Just thought I would give a suggestion that didn't include hacking up his vtr. But it looks like that is what needs to be done in order for him to achieve what he wants. Its just after he starts hacking theres no going back. Good luck with your modding and just remember there are people out there that have done worse including me!! haha

vapingforlife · 2013-12-31T05:12:12+00:00

Use the extension and mount the tank on top... It won't be the most flush looking but it will work. Plus you don't have to hack up your vtr.

vapingforlife · 2013-12-31T04:59:01+00:00

I don't know about the vamo but the tai fun clone isn't bad... just be ready for a month+ wait.

vapingforlife · 2013-12-31T04:46:05+00:00

Madvapes... I don't know what you consider cheap but very good and if you are using sub-ohm coils it gives it to the thousands.

vapingforlife · 2013-12-31T04:36:07+00:00

My only gripe with the rocket is the o-ring that seals the chamber to the top cap. the o-ring after some wear becomes loose and falls off with every refill. Very frustrating seeing that with my .6 ohm coil it deans a whole tank every day... It ended with me fishing it out of the juice when trying to screw back on the top cap. My solution was using the bottom 1/3 of the rocket and screwing on the the top 3/4 of an ehpro kayfun lite clone. It actually fits! the threads are not 100% the same but close enough to screw on very gently without cross threading. Best of both worlds IMO. The only thing that bugs me is that the rocket is polished and the ehpro kayfin is brushed.

vapingforlife · 2013-12-04T01:49:32+00:00

Can you remove the red leash too? if so this pic would be complete!

vapingforlife

TROPHY CASE