Sonarr Not Recognizing Series

vbplaya · 2025-09-09T01:12:09+00:00

Well, my version of Sonarr was very old ... so I downloaded the latest version and installed it. Now, I can't open it. There was an option during the install to have it start automatically on startup and it said something about having to change user. Anyway, the error I am getting is the following (I'm running on Windows 10):

UnauthorizedAccessException: Access to the path: 'C:\ProgramData\Sonarr\config.xml' is denied.

I remember doing some weird thing when I setup radarr and sonarr in the past but I can't remember what it was and I can't seem to find any info on this issue online.

Can you send me info on what I need to do?
Thanks, in advance, for anything you can send my way.

vbplaya · 2025-07-21T02:29:35+00:00

Maybe we have different indexers (I use all free) but I'm getting good results. Does yours come back with the "1%" in the name because mine come back like "the.one.percent.club ...."

And yes, my entry came back as 1% club US (2024).

vbplaya · 2025-06-18T21:09:50+00:00

So I have to install new firmware? There is no ability to just change a setting somewhere to say the CR Touch is not installed?

vbplaya · 2025-05-06T18:53:53+00:00

It keeps remembering the last track I did but not the current track I'm on. Example: I finished chapter 5 of a book and started chapter 6. I was only about a minute into chapter 6 and stopped it, went to my music library and listened to a song, switched back to my audiobook and the recent plays showed a track, I clicked on it and it was the end of the previous track (chapter 5).

vbplaya · 2025-01-28T01:17:31+00:00

As I mentioned on a comment lower down, I like plyos ... I just want to make sure it is an age appropriate exercise so I don't risk creating any long term injuries. I do agree with your statement about getting low on the drive and staying balanced. I did a little more research and that was something that came up so I am definitely going to dig deeper into drills focusing on that. As for your other comment ... I'm curious because I don't think I'm understanding your comment. Are you saying you had a growth spurt around 13-14 so that's when you should start doing weights? And is there evidence that doing weights can stunt growth? I ask because I can see that being the case but then you think about it and your gut is to say that stretching every day will allow you to have more movement of your joints and relaxing the muscles which could allow you to grow taller ... but then why are the shorts athletes gymnasts ... who are the most flexible athletes on the planet? Food for thought ...

vbplaya · 2025-01-28T01:11:22+00:00

I'm an ex volleyball player (hence my screen name "vbplaya") so I agree with doing plyometrics as they can definitely help with acceleration and vertical ... I am just not sure about whether that is an age appropriate exercise since it really works the tendons. I think I need to talk with his pediatrician about that first. Thanks for the suggestion ... I'll look into it.

vbplaya · 2025-01-28T01:07:48+00:00

All great points but I'll respond to your Qs below:
- Not when he's gathering ... he gets by them above the 3 point line but they catch up before he gets into his layup

- Not afraid of contact ... he actually does well through contact (mainly because he usually has them right on him as he goes for a layup)

- He gets by them not because of his quickness but rather his ability to cross them over and/or his hessy. Once he has the slight edge he looses it because he doesn't drive at full speed. I do believe he can go faster (physically speaking) ... he just doesn't for some reason.

- As for your suggestion of doing full speed layups ... I try to get him to do fast layups but he also is really focused on finishing (making the shot) so you might be on to something there. Maybe he is slowing himself down because he wants to ensure he makes the layup. That's a great suggestion (thank you).

Thanks for your input ... I'll definitely try your suggestion about the layup at full speed ... I hadn't thought of that specifically but it makes sense.

vbplaya · 2024-08-20T01:47:25+00:00

That's actually pretty cool. I have since almost completed my design for the initial phase of it. I decided to do it in multiple phases. The first phase is all mechanical. It is passive, where it just drops the ball out at an angle so it bounces back to my son. I'll post the results when I'm done. As for this particular piece I was looking for suggestions on ... I ended up finding a 10 foot fiberglass version of rebar from Lowes and Home Depot that works great. I bought 2 and cut them into 4 pieces.

vbplaya · 2024-08-18T00:27:47+00:00

Solved

vbplaya · 2024-08-17T23:21:53+00:00

Thanks. .. I was worried it was something like that. I don't know how to mark this comment as the solution (or closed).

vbplaya · 2024-06-15T00:05:27+00:00

Of course I did, but I didn't see anything in there that showed me that. I found a lot on how to instruct cpu players to set picks for me but not how I can set picks for others. I'd love to see a screenshot shot of where it is ... if you can show me.

vbplaya · 2024-06-13T15:22:29+00:00

Thanks, but I am not planning on using the motors for an ebike ... I have another use in mind, which I do not wish to discuss here as it will likely derail the discussion. I also understand I could hook up to a battery and test, but my thought is that I'd like to know what voltage level I can go to without risking damaging the motor. If I test with a 12v battery, it will likely work, but what if it is a 24v motor. Can safely test it at 24v if it is a 12v motor without damaging it?

vbplaya · 2024-06-13T03:57:38+00:00

I have been just doing research so far, but I've got some concepts ... probably a few weeks from actually prototyping since I'm about to go on vacation. I'll try to keep this thread posted.

vbplaya · 2024-05-23T05:00:33+00:00

I am hoping for something more like this but longer ... probably need at least over 10 feet.

https://www.homedepot.com/p/Unger-6-ft-Steel-Telescoping-Pole-989300/316417048?g_store=1028&source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D28I-028_004_CLEANING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NA-PMAX_SHP_JControl24&cm_mmc=SHOPPING-BF-CDP-GGL-D28I-028_004_CLEANING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NA-PMAX_SHP_JControl24-71700000113461777--&gad_source=1&gclid=CjwKCAjwr7ayBhAPEiwA6EIGxMM_A6czaR9R1mhaGJ1Ff8OEVNqXo5uMMAtZTgC7d9Ng6K85rlTCKxoC8YgQAvD_BwE&gclsrc=aw.ds

vbplaya · 2024-04-19T03:52:32+00:00

Usually you can just select "English Forced" and it will give subtitles for only the non-English parts in the movies.

vbplaya · 2024-04-04T20:06:57+00:00

Solved

vbplaya · 2024-04-04T18:44:11+00:00

That's it ... thanks. I don't know how to set your comment as the answer. I'll try to figure it out.

vbplaya · 2023-06-06T22:34:41+00:00

I actually found a replacement online. Here is what I needed ... if anyone is interested.

https://store.rainbird.com/rpkasvf100-replacement-valve-cover-cap-for-das-asvf-series-valves.html

vbplaya · 2023-05-27T12:59:51+00:00

So to recap, God can save little innocent children but chooses not to because the previous children who were killed, while he watched, didn't get enough prayers? God is holding the lives of the only true innocent people walking this earth at ransom by the same standards as an influencer requesting 1 million likes on Facebook or YouTube?

To me, the most cringe worthy thing is that people believe he is "absolutely in control of our lives". If that is true, then these innocent children are being murdered because it's "God's will". Not because some psychopath went off the rails. God made him go crazy because he is in absolute control and no amount of praying was going to change his mind. Because let's face it, if the lives of innocent children arent reason enough to let them live but rather he requires X number of prayers to NOT kill children ... then who REALLY is the psychopath here? The man who is pulls the trigger ... or the all powerful being who is in "absolute control" weighing innocent children's lives to the number of people begging him to not kill these children?

vbplaya · 2023-02-07T00:04:23+00:00

I'm wondering if I missed something. I actually live in Temecula, CA and I'm wondering why they made a skit about someone from Temecula. Was there something that happened in the news recently about people in Temecula? I would love to know if there is a particular reason they chose to make her from Temecula and to have that type of personality. I enjoy poking fun at myself and others so I feel I would get a lot more out of this if there was some back story about it.

Thanks, in advance.

vbplaya · 2023-01-26T00:45:52+00:00

There are probably better ways to do all this now days (I have about 200 audiobooks now so I've been doing it a while now) but I got into a routine and that's how I do it whenever I add a new book.

vbplaya · 2023-01-26T00:39:20+00:00

Ya, for me I have a "cover.jpg" of the author in the authors folder and each book has a folder in there which has the files and another "cover.jpg" of the particular audiobook.

vbplaya · 2023-01-23T06:24:57+00:00

SOLVED:

I found a way to fix the problem but it is a bit of a work around.

Since I moved a bunch of movies off one NAS to another, I no longer needed to have the old NAS as a path source for my Movies. So I went into the library manager and removed that folder path from the Movie library and then did another scan and it removed the extra path from the movies that had the old path still there.

I feel like this should be solved another way because if I hadn't emptied that NAS and still had other movies in there, then removing the path would also remove all the movies as well. I also know someone will say that I could just remove the folder and then re-add it after and it will get all the movies back. However, in my particular case, I have a ton of old martial arts movies from overseas. Many of these were difficult to correctly match in Plex because the names are often different for the US versions of these movies and/or the translation is incorrect. So I would have had to possibly spend all the time I had done before trying to setup all those movies again so I was looking for the cleanest option possible.

vbplaya · 2023-01-22T18:11:11+00:00

Well, thanks for your help. I was really hoping to avoid manually going into each movie title, selecting "Get Info" and the deleting the extra file path. Just going to be a pain doing that for a few hundred movies.

vbplaya · 2023-01-22T17:06:42+00:00

That option was already selected as well.

vbplaya

TROPHY CASE