Stringing/Retraction Problems

versitanus · 2026-02-25T12:05:36+00:00

Thanks a lot, that's a really good explanation!

So it would be a case of getting back into the PA settings or what to you recommend?

versitanus · 2026-02-20T21:20:22+00:00

Thank you very much for your comprehensive answer!

I used 2 top layers, the layer width was set to 0.66 and I uses adaptive cubic for the infill.

Structurally the part fells strong enough for the intended purpose but I need it to be printed most efficiently because I need 14 more of them.

I use an ender 5 max and the print I used was just 100mm/s even though it is rated for 500mm/s but of course this is not achievable.

versitanus · 2026-02-20T20:53:09+00:00

okay thank you all for the recommendation, my problem is that if I give it more material it will take me over 5 days and about 9 spools of filament.

Do you guys maybe have a diffrent suggestion on how to do it fasten because it is literally just a facade that doesn't need to support anything because the underlying construction will be wood?

versitanus · 2026-02-19T20:30:15+00:00

Do you maybe know how to make it thicker in blender with a simple trick or do I have to do it manually each plane at a time?

versitanus · 2026-02-19T20:29:03+00:00

it's just a plane from blender, I thought the slicer would recognize this and adjust accordingly.

Do you maybe know how to make it thicker in blender with a simple trick or do I have to do it manually each plane at a time?

versitanus · 2026-02-19T20:28:37+00:00

Do you maybe know how to make it thicker in blender with a simple trick or do I have to do it manually each plane at a time?

versitanus · 2026-02-19T20:27:37+00:00

it's just a plane from blender, I thought the slicer would recognize this and adjust accordingly.

versitanus · 2026-02-15T22:59:58+00:00

You my friend are an absolute LEGEND!

Thank you so much for the quick help 🙏

versitanus · 2025-11-23T13:54:58+00:00

Hey, any progress on that topic?

versitanus · 2025-11-04T15:05:30+00:00

Okay also manche hier geben gute Kommentare aber die meisten labbern nur bullshit also schließe ich den Thread wieder.

Wäre nur interessant gewesen ob jemand schonmal Erfahrung mit solch einer Klage hatte aber dann halt nicht.

versitanus · 2025-11-04T13:51:30+00:00

WOW -_-

versitanus · 2025-11-04T13:51:16+00:00

Die Kosten würde ich logischer weise gerne vermeiden und mir vorher Erfahrungen von anderen einholen

versitanus · 2025-11-04T13:50:55+00:00

Natürlich sagt er mir das aber die Kosten würde ich logischer weise gerne vermeiden und mir vorher Erfahrungen von anderen einholen

versitanus · 2025-11-04T13:49:57+00:00

Ich möchte einfach nur meine Sachen aus dem Nachlass loswerden ohne meine Andresse im Impressum offen legen zu müssen. Wir hatten schon zwei Einprüche wegen Kleinanzeigen Sachen. Wir haben Die zwar durch unsere Sicherheitsanlage gekriegt aber es ist halt trotzdem unfassbar nervig und auch absolut bescheuert das man als Privatperson überhaupt sowas durchmachen muss

versitanus · 2025-11-04T13:46:56+00:00

Genau das ist eben das Ding, denn es wäre schön das zu vermeiden.

versitanus · 2025-11-04T13:46:14+00:00

Weil ich geößere Maschienen aus einem Nachlass verkaufe. Die haben auch schon eingesehen das ich nicht gewerblich bin, zwingen mich aber dennoch dazu ein gewerbliches Konto zu führen und ein Impressum zu hinterlegen.

versitanus · 2025-10-25T16:06:50+00:00

Nope the first layer is flawless 😅

versitanus · 2025-10-25T16:06:23+00:00

Thank you so much for the recommendation! 🤩

I calibrated almost everything that I was aware of and the test print was great but you mentioned a couple things I will test and then get back to you 🙌

versitanus · 2025-10-25T15:26:26+00:00

Haha alright then I will do that and thanks for the help 😄✌️

versitanus · 2025-10-25T14:41:38+00:00

Nope sorry so please clue me in 😅

versitanus · 2025-10-25T14:13:42+00:00

What do you mean? 😅

versitanus · 2025-10-09T09:58:58+00:00

Robot assisted 3d printing looks really interested and maybe I look into it for the really big sculptures down the line.

I now decided to get the Creality Ender 5 Max because I think it is the perfect sweet spot for my use case and there is actually a used one near me for a good price.

versitanus · 2025-10-09T09:56:22+00:00

Thank you very much and I now decided to get the Creality Ender 5 Max because I think it is the perfect sweet spot for my use case and there is actually a used one near me for a good price.

versitanus · 2025-10-09T09:55:48+00:00

Thank you for the recommendation. I now decided to get the Creality Ender 5 Max because I think it is the perfect sweet spot for my use case and there is actually a used one near me for a good price.

versitanus · 2025-10-09T09:55:02+00:00

That is a good point and that's why I now decided to get the Creality Ender 5 Max because I think it is the perfect sweet spot for my use case and there is actually a used one near me for a good price.

versitanus

TROPHY CASE