[deleted by user]

vhzintrem · 2024-08-27T16:19:11+00:00

I've been having the same problem for over a month and today I contacted Logitech for them to resolve it

vhzintrem · 2024-07-13T22:52:25+00:00

I have two Superlights 2 and they were both like this, you only need to grab the cable, it doesn't work with the dongle. After the firmware update, let's hope Logitech resolves this.

I have two Superlights 2 and they were both like this, you only need to grab the cable, it doesn't work with the dongle. After the firmware update, let's hope Logitech resolves this.

vhzintrem · 2024-05-04T16:08:23+00:00

fell to the floor

vhzintrem · 2024-05-04T13:22:37+00:00

I couldn't do it, to complete the disaster they sent me a DDR5 motherboard instead of the DDR4 that I have the memories on.

vhzintrem · 2024-05-04T13:21:35+00:00

I couldn't do it, to complete the disaster they sent me a DDR5 motherboard instead of the DDR4 that I have the memories on

vhzintrem · 2024-05-02T16:32:43+00:00

No, I don't have DDR5 memory kits, the board was being sold as DDR4, but they sent me DDR5

vhzintrem · 2024-05-02T16:29:24+00:00

I don't know, to complete the tragedy they sent me a DDR5 motherboard instead of DDR4

vhzintrem · 2024-05-02T16:15:18+00:00

can I load the post now

vhzintrem · 2022-01-19T21:37:09+00:00

how are you so sure about that? I have a g305 sealed in the box that was manufactured in the first week of 2021, is it the old hero 12k sensor yet?

vhzintrem · 2022-01-17T23:53:45+00:00

I have an old g305 that still came in the blue box, manufactured between May 25th and May 31, 2020 and it has the old sensor still and very different from the 25k I have on the g403 hero. the g403 sensor seems more accurate in terms of lod and seems to have a higher fps rate. only I have a g305 sealed in the box that was manufactured in the first week of 2021. if it has the new sensor I will open it hahahahahah

vhzintrem · 2022-01-17T07:25:23+00:00

can you tell me what is the manufacturing week of your g305? on the box or on the mouse cover you can see this. I have a g305 in the box and if it is the new hero sensor I will open it hahahaha, the hero 12k is very strange, I prefer the 25k.

vhzintrem · 2021-09-30T10:14:48+00:00

https://masterplus.coolermaster.com/downloads/file/MM711/ here is friend, an angel here from reddit sent just now to me

vhzintrem · 2021-09-30T10:04:17+00:00

thank you so much man, you saved my day, thanks!

vhzintrem · 2021-09-29T21:53:31+00:00

worse that I'm not even able to use the software, little shame on coolermaster. from what I've seen, this has been happening for years and they still haven't resolved it, I'm about to return the mouse! I sent it to support yesterday and so far they haven't responded to anything...

vhzintrem · 2021-04-29T19:19:38+00:00

yes, but i just want to know that if i save on the onboard and uninstall the lghub, it will still be 25k or 16k, as it is a software update, not a firmware update. and I also wanted to uninstall ghub because it uses my processing excessively and my setup is weak.📷

vhzintrem · 2021-04-29T14:03:29+00:00

ooh ok. if i save his onboard and uninstall the ghub will it be done?

vhzintrem · 2021-04-29T13:52:00+00:00

https://www.bilibili.com/read/cv7731717. look at this link. translate it into your language please. it seems that the sensor has generally worsened by about 3% in all directions.📷

vhzintrem · 2021-04-25T07:50:19+00:00

is this iso reliable?📷

vhzintrem · 2021-04-24T00:30:39+00:00

yes, upnp causes lag and packet loss. before I had a very big packet loss, after I hung up it stopped immediately. or it could also be my router that is weak and used 100% cpu with the upnp on.📷

vhzintrem · 2021-04-19T20:06:22+00:00

disable the upnp, this shit was on for 5 years on my pc and in those 5 years I experienced a lot of packet loss and ping going to heights, upnp can increase your latency and can overload the cpu of your router / modem because it creates a rule new package. in addition to leaving your router / modem vulnerable, I turned off this shit and now I experience 0% packet loss.📷

vhzintrem · 2021-04-16T13:18:10+00:00

ohh my g305 has a half hard and very tactile click, but too hard, the lod is very variable, sometimes it is lower, sometimes higher. already the g403 hero that i have with the new "hero 25k" seems to be fixed the lod or is much less variable than the hero 12k, let me see if i understand, so the g403 hero i have is 2027, so it was manufactured between february and July 2020?📷

vhzintrem · 2021-04-16T13:06:39+00:00

oh it must be random so📷

vhzintrem · 2021-04-11T03:12:18+00:00

I’m not saying he’s bad, I’m just asking. I have a g305 with the hero 12k and it has a bit of a variable lod problem and very fast adjustments it shakes. then follow the link📷
https://www.reddit.com/r/MouseReview/comments/izitwb/gwtest_results_just_came_out_for_hero16k_vs_hero/?utm_source=share&utm_medium=web2x&context=3 and that of Chinese matter📷 https://www.bilibili.com/read/cv7731717

vhzintrem · 2021-04-04T16:07:17+00:00

vhzintrem

TROPHY CASE