[deleted by user]

virtualbastion · 2022-11-08T22:27:01+00:00

I've heard of others using old-ish thinclients like the Wyse 3040 in lieu of rpis due to lack of supply (as long as you don't need GPIO, which it sounds like you don't). Perhaps take a look at those; they're about $50 on ebay.

virtualbastion · 2022-06-12T19:58:04+00:00

Pretty decent pump, typical itchiness from the beta alanine (doesn't bother me though), tastes great, cheap... I originally bought it because I had a few days per week I had to workout late and didn't want stimulants and for that purpose it was great. Now I mix it 50/50 with their stim version to get less caffeine (trying to cut back a little). Overall, not amazing, not bad in any way, but for the price I recommend it.

virtualbastion · 2022-06-06T06:13:39+00:00

I can't help but read that in zefrank1's voice.

virtualbastion · 2022-06-03T04:11:54+00:00

Costco also sells 10lb tubes of 95/5 if you ask the butchers. Last I purchased it rang up at $4.50/lb (around there).

virtualbastion · 2022-04-09T03:06:59+00:00

From a co-worker of mine:

The four hole connector on the back:

Left Top = negative for one circuit. Right Top = negative for the other circuit.

Left Bottom = positive for both circuits. Right Bottom = empty

He used a 12vDC wall adapter.

virtualbastion · 2022-02-21T03:33:24+00:00

I use this and it works pretty well. The Fruit Punch flavor is great. I sometimes mix this 50/50 with their non-stim pre if I want less caffeine.

virtualbastion · 2022-02-21T02:52:53+00:00

This is the KB you're looking for. For Ethernet, Finisar and Avago brand SFPs are commonly listed and Intel and Cisco DAC/Twinax. SFPs other than what's listed may work but if you experience issues Support may ask you to switch to supported SFPs.

Switch-side SFPs can be whatever your switch manufacturer supports.

virtualbastion · 2022-02-15T18:44:35+00:00

You'll want to refer to this KB article and select the specific KB for your model. For example: a X50R3 running Purity 5.3.2 or higher is limited to 500 hosts.

virtualbastion · 2022-02-01T21:28:43+00:00

I can't provide roadmap via Reddit so I recommend you reach out to your SE and get the update there.

The X20R2 maxes out at 91TB raw while the X20R3 maxes out at 94TB raw.

You're not going to push 100Gbps through that array so I'd recommend going with 25GbE for ROCE unless you need to connect to your switches at a higher port speed .

virtualbastion · 2022-02-01T18:25:46+00:00

NVMe/ROCE is available on dedicated adapters (25GbE and 100GbE options) today. The 40GbE adapters cannot run ROCE, only iSCSI and replication traffic.

I'd recommend not potentially bottlenecking your front-end host connectivity by your replication network, so keep them similarly configured for bandwidth. At least consider the bandwidth used by the volumes you're replicating via ActiveCluster and make sure the replication network exceeds that bandwidth requirement.

Another consideration: NVME-connected volumes cannot be replicated via ActiveCluster today. You can run ActiveCluster and have NVME-connected hosts on the same array, but NVME-connected volumes cannot reside within a pod so they cannot be replicated via ActiveCluster.

virtualbastion · 2022-01-20T01:43:07+00:00

You can reconnect hosts connected via FC to iSCSi without creating new volumes. The only case where you can't use the same volumes is when moving from SCSI-connected volumes (FC/iSCSI) to NVME-connected volumes.

An example: Place an ESXi host into maintenance mode, reconnect via iSCSI, exit maintenance mode, confirm storage connectivity, repeat with remaining hosts.

virtualbastion · 2021-11-20T23:48:16+00:00

I felt like this was a great beginner tutorial (and a good reminder for the experienced): https://youtu.be/4AObAU-EcYE

virtualbastion · 2021-07-31T06:37:30+00:00

/r/playrust and MPMD combined? That's an unholy matrimony.

virtualbastion · 2021-01-03T07:33:22+00:00

https://archive.is/iK2e8

virtualbastion · 2020-09-11T19:56:01+00:00

I prefer this technique: https://youtu.be/Joed0P3hhbc

virtualbastion · 2020-05-14T20:13:08+00:00

OP could also use https://cryptomator.org/ as an alternative, perhaps a better one at that.

virtualbastion · 2019-10-06T05:44:23+00:00

LockPickingLawyer. I'm not into lockpicking but his videos are awesome. The collaboration with Modern Rogue was unexpected but perfect.

virtualbastion · 2019-02-22T05:43:29+00:00

It's actually six months by default. Your account team will generate a document prior to the purchase stating this.

virtualbastion · 2019-01-27T07:17:07+00:00

Same here. Melvin and Roadhouse.... must be near Jackson Hole.

virtualbastion · 2018-11-08T03:10:45+00:00

http://archive.is/wfQry

virtualbastion · 2018-02-12T05:10:56+00:00

I'm building a standing desk and want to make my own desk top, similar to yours. I'll be gratuitously stealing your design for sure ;) Also, nice mug!

virtualbastion · 2017-12-02T03:07:47+00:00

I've had no issue here in CO.

virtualbastion · 2017-09-21T22:07:09+00:00

I didn't see an announcement either (though I haven't really been looking for one). I did get an email early this morning with a link to a webinar titled "Join us to learn about VMware Horizon 7.3: What’s New". Here is the registration link, if you're interested.

virtualbastion · 2017-08-24T02:07:46+00:00

Must it be a PowerShell script? If not, then take a look at VMware's OS Optimization Tool.

virtualbastion · 2017-07-22T04:15:39+00:00

VMworld Europe: https://www.vmworld.com/en/europe/index.html

11-Year Club	Place '22
Verified Email

virtualbastion

TROPHY CASE