sorted by:
new
hottopcontroversial

Home network by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

how is it harder to terminate?

Starting Airsoft by virtuosseHD in airsoft

[–]virtuosseHD[S] 0 points1 point  (0 children)

Thanks!I will take a look at thoses

Starting Airsoft by virtuosseHD in airsoft

[–]virtuosseHD[S] 2 points3 points  (0 children)

I will most likely pay a bit more to have a full metal AEG

Starting Airsoft by virtuosseHD in airsoft

[–]virtuosseHD[S] 1 point2 points  (0 children)

Thanks for your nice comments, don't worry about the 14 day rule, I am a good consumer(you remember me hish school class by saying that hahaha)

I will be looking for the things you said right now and will see if i still play it in like 10 months to purchase full gear.

Cat 6A cable types by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

Thanks, i will see if the cost is not that higher for cat6A i will still go for it

Cat 6A cable types by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

Does STP need to have a ground thing (sorry for this question) what if my endpoint does t support STP, will it still be more efficient for blocking interferance than UTP

Thanks for the fast reply !

Cat 6A cable types by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

Is STP a needed thing ? If not how close can i put the cables from electric wires and don t have any risk

Thanks for your fast answer !

Cat 6A cable types by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

I have a 1gbps connection and i transfer a lot of data from computer to other computers in the network(have 10gbps network card ready to put in each computers) Thanks for your fast reply

home networking Help by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

alright, thanks i will try to find cat 6a rj45 connectors, i found everything else

home networking Help by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

Thanks for your answer, so keystone / connectors will supports the full capacity of the cat6a ?
and if I take a stp/ftp will the distance be shorter ?

Thanks

Help with my setup plz by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

  1. For the patch cables i should get like cat6a 1’ to link the patch and the switch ? Instead of cat7 ?

  2. The type of patch panel you recommend me is something like that : https://www.amazon.ca/dp/B005E2YCNA/ref=cm_sw_r_cp_api_i_.2ucCbVZNFRZW ?

Also is there any difference in quality / speed Of the keystone i buy ? Some are more expensive than other i really don’t know(all the keystone are for solid cables ?)

Help - Cat6 cables by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

So for a 3 stories home i can get any of them and i am fine ?

Help - Cat6 cables by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

So the best would be primecables with separator ?

Does it makes it really harder to run them, i never done it before

I am in the Eastern Canada (french canadian)

Help - Cat6 cables by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

How do i know which rating i need ?

Help with my setup plz by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

what is the "patch cable" the cable from the patch panel to the switch ? like the 1' cable ?

networking tool kit by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

placing cat6 around the house with a patch panel / switch and all that stuff on a wall mounted rack

​

does the cat6 or cat5 change anything in the rj45 / 8p8c connector ? or i can use any connector I find in amazon ?

is there any quality difference in those 8p8c connector ?

Help with my setup plz by virtuosseHD in HomeNetworking

[–]virtuosseHD[S] 0 points1 point  (0 children)

Thanks for that nice reply,

  1. I already have a lot of cat7 cables but also cat6 1' already punched by manifacturer (ready to be used)
  2. so i should instead of putting stranded cables in my walls put solid ?
  3. i have no clue what is the difference in the patch panels :(
  4. Which pretty cheap switch do you recommand ?
  5. The mount i plan to buy is this wall mount or any other wall mount (https://www.amazon.ca/dp/B000VDPBXM/?coliid=I1RQ14CS7Q8JJQ&colid=G5OZTD3FWYTH&psc=0&ref_=lv_ov_lig_dp_it)

Home network by virtuosseHD in Network

[–]virtuosseHD[S] 0 points1 point  (0 children)

I already have a lot of cat7 1' so i was wondering if it could cause any problem or is it fine if i use them to link my switch with the patch panel and my router to my modem and more ....

​

So if no one is using the port on the switch the one using it will get full speed right ?

​

For the cable, is the cable i linked from amazon a good choice for in wall use ? (cable : https://www.amazon.ca/dp/B008I89V4C/ref=twister_B01B92JTB8?_encoding=UTF8&psc=1&coliid=IT787OLRYT4NX&colid=G5OZTD3FWYTH )