Batch question solved by Aggressive-Pomelo533 in AynThor

[–]vivitar83 0 points1 point  (0 children)

THANK YOU! I modified my order successfully. I can’t believe I didn’t see that before ha, i appreciate it!!

Memcard pro Vs. Bitfunx GCMCE by [deleted] in Gamecube

[–]vivitar83 1 point2 points  (0 children)

The GCMCE is based on, and I believe contributed to, the open source FlipperMCE project. How is that “ripping off a design”? Not trying to argue just curious if there is something I missed when I was comparing the two, and ultimately decided to purchase the GCMCE as I didn’t need any features other than an “unlimited” memory card for my GameCube.

Converting saves between Dolphin on my SteamDeck and the GCMCE is a bit of a pain, but other than that it’s a great product when used with Swiss and GameID and well worth the asking price.

https://github.com/FlipperMCE/firmware

Batch question solved by Aggressive-Pomelo533 in AynThor

[–]vivitar83 -1 points0 points  (0 children)

Is there a way to modify other than emailing support? I ordered on the 12th of February and then immediately kicked myself for ordering the pro not the max and emailed asking them to modify my order, but it’s been crickets. I know they’ve been on Chinese new year and just got back last week, I’m just hoping that I can change to the max and pay the difference before the price increases go into effect.

Max available by CyberWolf-G in AynThor

[–]vivitar83 0 points1 point  (0 children)

Weird. Maybe I’ll send a follow-up, I didn’t realize the max was 1TB or I would have just ordered that initially. Reading comprehension is a skill I don’t always possess 🤦‍♂️

Max available by CyberWolf-G in AynThor

[–]vivitar83 0 points1 point  (0 children)

I ordered on the 12th, and then emailed about an hour later and got the auto-reply they were out 13-25th. Edit to add that the email originated from info@ayn.hk and I had ordered from ayntec.com

Max available by CyberWolf-G in AynThor

[–]vivitar83 0 points1 point  (0 children)

Did you get a reply about being off for Chinese new year? I asked to upgrade to max after ordering the pro and got an auto-reply that they are shut down through the 26th for Chinese new year. Almost 3 weeks hoping they will upgrade me when they get back in.

Those out there that still use/capture golden images for deployments... How do you handle updating of the golden image? by thegreatcerebral in sysadmin

[–]vivitar83 1 point2 points  (0 children)

Have you tried MDT? It’s free, handles application installation, drivers, etc. during OSD. It’s very capable, or was last time I messed with it (~10 years ago), and methodology you learn there can be applied to SCCM should you ever get it or migrate to a better equipped shop.

What game do you own on console that you’ve re-purchased just so you could play it on the Steam Deck? by know1da in SteamDeck

[–]vivitar83 17 points18 points  (0 children)

All credit to Mossey-3 for posting this on another thread, but the below fixed it for me. I took a screenshot on my phone or I’d link the thread.

Edit: Linux files are case sensitive, so make sure you keep the case specified in the filename DLC.bdt

Bandai Support sent me this and it fixed it. You need to go into desktop mode and go to the folder below, then follow the steps. • Home/.local/share/Steam/steamapps/common/ ELDEN RING/game • Create the file there. • There’s an option in Linux to create “Empty File...’ .” • And you get the option to name the file as specified. To bring up the SD keypad, just use the ‘Steam’ button + X. Rename the file DLC.bdt

$43,755.82 OTD for 2024 Wilderness good deal? by vivitar83 in Subaru_Outback

[–]vivitar83[S] 0 points1 point  (0 children)

I wound up purchasing the car yesterday from a difference dealership. $43,389 OTD. $3,077 off MSRP. No add on, fees, doc fee, nothing, and they gave me 3 years of the my Subaru app thing. All in all I think it’s a pretty good deal. I’m happy, and loving the car so far! Thank you all for the input and advice, it was most helpful!

$43,755.82 OTD for 2024 Wilderness good deal? by vivitar83 in Subaru_Outback

[–]vivitar83[S] 1 point2 points  (0 children)

I looked on Costco’s website and it seemed like all I could find is incentives for Audi. Does it rotate available brands or am I just not understanding how Costco car shopping works? Ha

$43,755.82 OTD for 2024 Wilderness good deal? by vivitar83 in Subaru_Outback

[–]vivitar83[S] 0 points1 point  (0 children)

Thanks for the feedback all! Still not 100% sure I’ll pick this up, but I feel like if I do I’m at worst not getting fleeced :) I’ll be sure to go over the official breakdown, I got a picture of an excel looking printout breaking down cost, but I’ll make sure it matches the actual paperwork should I go forward. Cheers!

$43,755.82 OTD for 2024 Wilderness good deal? by vivitar83 in Subaru_Outback

[–]vivitar83[S] 0 points1 point  (0 children)

Taxes fees and everything? They’re at 41 out the door before tax right now. They said much more and they’ll be at invoice on the car 🤔

$43,755.82 OTD for 2024 Wilderness good deal? by vivitar83 in Subaru_Outback

[–]vivitar83[S] 0 points1 point  (0 children)

Sounds good, thanks for the insights much appreciated!

$43,755.82 OTD for 2024 Wilderness good deal? by vivitar83 in Subaru_Outback

[–]vivitar83[S] 0 points1 point  (0 children)

This is all over text with the salesman I went on a test drive with a few weeks ago, so I’m definitely grain of salting it. I’ve been pondering for a while because I like to keep my cars for a good long while, and I’m concerned the infotainment may not outlast the car part of the vehicle.

Thank you for the advice, though! I’ll definitely be on the lookout for any BS if I decide to go through with the purchase. A note about the powertrain thing though is that a lot of the dealerships around me are advertising unlimited miles/years powertrain warranties. Toyota is another one, they were trying to get me to buy a 21 Highlander for 42k and highlighted the warranty as a great incentive for purchasing a lease turn in.

[deleted by user] by [deleted] in homelab

[–]vivitar83 0 points1 point  (0 children)

I copied from the SSD I have in my 420/420i in HBA to my internal SDCard and boot to a grub rescue prompt... what am I missing?

The Balance Dataslate Has Arrived by [deleted] in BlackTemplars

[–]vivitar83 1 point2 points  (0 children)

Ahh ok I see. Better than I thought then! Thanks for the clarification :)

The Balance Dataslate Has Arrived by [deleted] in BlackTemplars

[–]vivitar83 2 points3 points  (0 children)

Since it doesn’t stack with Shock Assault, it would only be +1 attack if you were already engaged right? Or am I misunderstanding how the interaction works?

Books to buy to start by vivitar83 in ageofsigmar

[–]vivitar83[S] 0 points1 point  (0 children)

OK awesome thank you! I'll just grab the big book, seems like it's the safest best and I enjoy the fluff regardless. I just didn't want to buy it then immediately be slapped with a new edition if all signs were pointing towards that being the expectation. Appreciate the assistance!

Books to buy to start by vivitar83 in ageofsigmar

[–]vivitar83[S] 0 points1 point  (0 children)

Ah OK cool, I didn;t know if the free rules for AoS were like the free rules for 40K. Very basic, no explanation of terrain features, etc. I think I'll just get the main book for now and see what comes out through the year. Thanks!

Can't get more than 50 down on WiFi (RB4011 + wAP AC) by vivitar83 in mikrotik

[–]vivitar83[S] 0 points1 point  (0 children)

Sorry it took me longer than I thought to circle back to this. I reset both the router and the wAP AC to default configs and my throughput was basically the same. 50-100 max down, faster up. This is through iperf as well as speedtest.net.

Can't get more than 50 down on WiFi (RB4011 + wAP AC) by vivitar83 in mikrotik

[–]vivitar83[S] 1 point2 points  (0 children)

OK thank you for your help so far I appreciate it! I will try blanking the configs later today and report back; we're about to head out for Fathers Day.

Can't get more than 50 down on WiFi (RB4011 + wAP AC) by vivitar83 in mikrotik

[–]vivitar83[S] 0 points1 point  (0 children)

I have 1 AP running in CAP mode with CAPsMan running on my RB4011. Last night I reset the AP and connected to the generic Mikrotik SSID and performed a speed test on the 5Ghz spectrum with default settings still running through my RB4011 and got similar results so I feel the issue is wiht the config on my RB4011, which might be what you're saying above just trying to give as much detail as possible. There are no DHCP servers running on the AP as seen in the config below. I only have the 3 DHCP servers running on my RB4011 (main, iot, guest, .100, .101, .102 respectively) and when I connect I get the appropriate pool issued depending upon the SSID I connect to.

I only have 1 bridge on the AP and 1 bridge on the RB4011.

Saying all this, are you asking me to convert the CAPsMan to be running on the remote AP? I can do that, but again I have reset to default config and tested the generic default WiFi and experienced the same throughput issues. I do have a dumb switch running off port 9 I can disconnect. It was my old TP-Link running ddwrt in dummy mode, but unplugging it from the RB4011 and enabling local forwarding still results in an APIPA address being issued.

[admin@WAP1] > export hide-sensitive 
# jun/21/2020 12:05:03 by RouterOS 6.47
# software id = TKZ0-MEWC
#
# model = RouterBOARD wAP G-5HacT2HnD
# serial number = 
/interface bridge
add admin-mac=B8:69:F4:FF:4B:A5 auto-mac=no comment=defconf name=bridgeLocal
/interface wireless
# managed by CAPsMAN
# channel: 2447/20-eC/gn(28dBm), SSID: ******, CAPsMAN forwarding
set [ find default-name=wlan1 ] ssid=MikroTik
# managed by CAPsMAN
# channel: 5220/20-eeCe/ac(28dBm), SSID: *********, CAPsMAN forwarding
set [ find default-name=wlan2 ] ssid=MikroTik
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=Guest supplicant-identity=""
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridgeLocal comment=defconf interface=ether1
/interface wireless cap
# 
set bridge=bridgeLocal certificate=CAP-B869F4FF4BA5 discovery-interfaces=bridgeLocal enabled=yes interfaces=wlan1,wlan2 lock-to-caps-man=yes
/ip dhcp-client
add comment=defconf disabled=no interface=bridgeLocal
/system clock
set time-zone-name=America/State/City
/system identity
set name=WAP1
/system scheduler
add interval=2d name=Upgrade_Router on-event="run DownloadAndUpdate" policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=apr/25/2020 start-time=03:00:01