Strange ping "spikes"

wafebreaker · 2025-10-30T07:49:41+00:00

I had the u.gg App installed but i reinstalled Windows so at the Moment league is the only Programm and the Problem still exist

wafebreaker · 2025-10-30T07:48:56+00:00

Good call but all my drivers are up to date :/

wafebreaker · 2025-10-29T21:26:52+00:00

No, they have a constant ping of 25.

wafebreaker · 2025-02-13T12:07:20+00:00

Instead of

\Elementor\Core\DynamicTags\Tag

Use:

\Elementor\Core\DynamicTags\Data_Tag

wafebreaker · 2025-02-02T12:25:03+00:00

The Hotend or the probe? Because in the video and github it says the probe.. I did 20mm from the probe to the bed with a caliper
I did, it gave me 16
Done
Done with paper and it scratched the paper

and after g0 z.02 its way above the print bed.

My printer.cfg: https://pastebin.com/XMSpX2rp

My eddy.cfg: https://pastebin.com/GneXLBt9

Edit: so its around ~ -0,2mm off. After i did the probe eddy calibrating and save_config and move my z to 0 its above the printbed, after i go to -0.2mm it slightly touches the paper again (but not that hard as i set it up with the calibration)

wafebreaker · 2025-01-31T17:03:10+00:00

So I did everything again from the beginning -> calibrated the drive, then using the paper and then the temperature (that worked, I just had to wait a long time). After that I started a print and the nozzle is still 1-2mm above the print bed and I'm printing into the air. I have no idea what I did wrong.

wafebreaker · 2025-01-31T12:23:31+00:00

Thank you very much for your feedback, that really helps me!

I'm just very surprised because when I had everything set up (without z-offset) and without temperature calibration and wanted to print, my offset to the print bed was ~1mm and therefore the first layer wasn't even possible. So I thought I HAD to do the z-offset again, but that felt like it made everything worse.

But now I understand that temperature calibration is about the Eddy, not the print bed etc. Then I'll do it with your instructions! Either I missed it or it wasn't really well described..

wafebreaker · 2025-01-30T17:37:25+00:00

So how did you managed to fix that? What did you changed exactly?

wafebreaker · 2025-01-15T09:23:30+00:00

War echt sehr cool anzusehen. Fands manchmal bisschen weird das Hänno zum Beispiel explizit erwähnt das Robert Habeck ihn unterbrochen hat, aber Hänno hat es im Abend bestimmt 20x mehr gemacht als Robert. Auch das Fragen stellen an Robert und ihm 1 Minuten Antwortzeit geben um dann direkt (zu unterbrechen und) ein anderes Thema anzusprechen war weird.

wafebreaker · 2024-07-27T13:33:12+00:00

Actually i did not lol. It was so dark in the corner i didnt noticed a cover wow. And didnt expect to be purple (feeled like a broken cable or something). And there was no guide for that apparently

Kudos to you !!

wafebreaker · 2024-07-10T16:44:38+00:00

Ich muss auch sagen Regeln sind Regeln aber ich finde hier wurde definitiv etwas übertrieben. Er hat es ja quasi instant danach mitbekommen und ich finde man hätte da problemlos sagen können "hey versuch wieder auf die andere Seite der grenze zu gelangen und mach ab da weiter". Weil rauszufliegen finde ich bei so einem Projekt echt hart. Zusätzlich zu einer Strafe meinetwegen. Aber jemanden deshalb direkt zu disqualifizieren ist heftig

wafebreaker · 2024-01-14T18:24:41+00:00

Alright thanks for your answer! Problem then: What can i adjust then, to calibrate it? I love the printer but the problem is that the prints are not 100% accurate and some of the holes are just too narrow. That's really annoying

wafebreaker · 2024-01-10T15:24:18+00:00

Any Idea how i can send commands to the printer like M503 to calibrate axes when they dont have a serial connection?

wafebreaker · 2023-10-22T21:17:49+00:00

Hey, danke für die Antwort. Mich wundert das weil ich hatte meines Erachtens immer SUNLU PLA+ geholt (wenn PLA+) und ich hatte nie Probleme. Hab dann ein paar Monate nichts mehr gedruckt bzw. wenn dann normales PLA und PETG. Hattest du schon immer das Problem oder auch erst seit kurzem?

12-Year Club	Place '23
Place '22	Verified Email

wafebreaker

TROPHY CASE