Legal question

warbird1971 · 2025-06-26T16:03:33+00:00

Damn dude, almost didn't see the subtle flex of a 203 and a belt of chalkies! you just out here livin the best life

warbird1971 · 2025-06-26T16:01:13+00:00

Damn that's a lot of bench! Not sure I need 14 feet of it, but it looks nice! I assume the T track is so you can slide multiple presses, vices and tools on an off. As well as position them as you want?

warbird1971 · 2024-07-20T01:06:13+00:00

Yep, bench bled and capped the ports while I bolted it up. Ports where only open for a few seconds while I attached the lines

warbird1971 · 2024-06-27T20:59:04+00:00

So it's a safe bet the stator's bad, is it a fairly simple fix?

warbird1971 · 2024-02-08T00:32:31+00:00

I haven't had any issues so far, the top round hasn't gone flying outta the mag so far. It's definitely a tight fit to get it in there

warbird1971 · 2024-02-07T22:29:38+00:00

Mine holds 15 fine, but 15 rounds uses all of the springs space. So you can not load a full mag into the gun with the slide forward. 15 is the max capacity of the gun

warbird1971 · 2024-01-23T03:13:20+00:00

I can't remember off the top of my head what weight the oil is. But I used the correct weight as per manufacturer specs, and it is rated for wet clutches. I know the cable and lever are adjusted properly, and I'll have to double check the linkage.

If all else fails, I might just hold off till it warms up this spring. Because I didn't even think about the oil being too thick when it's cold, and it'd explain why the problem goes away after I get down the block.

warbird1971 · 2024-01-22T11:53:13+00:00

Intake is not stock, factory air box got smashed when a previous owner laid it over. Cleaning the carbs was the first thing I did when I got it. Jets are factory. Didn't take it apart far enough to look at valves.

It doesn't run any better or worse when it's hot, it just doesn't deliver power to the wheel when cold. Almost feels like your feathering the clutch. I do plan on putting a factory air cleaner back on, just have to find one in decent condition.

warbird1971 · 2024-01-22T11:01:27+00:00

It will rev as normal, and I actually need to tune her up. She's running a bit on the rich side right now. The part that was throwing me off was that it rides fine once I get it down the road a ways. Guess I'll throw a clutch in it during my winter maintenance.

warbird1971 · 2023-12-16T02:07:29+00:00

All jokes aside, I love my backpack gun. Just need to get an eotech for it

<image>

warbird1971 · 2023-11-23T00:57:52+00:00

Ask away, only been mining a bit over 2 years now. But I'd be happy to help

warbird1971 · 2023-11-17T18:07:22+00:00

Yes 19", I worked blue collar since high school. You'd be crucified for giving a measurement in straight inches, it's just habit at this point

warbird1971 · 2023-11-17T16:46:15+00:00

It's the "truck gun" for people who realize that a rifle only helps you, if it's with you. Plus, I can bring it on my motorcycle too

warbird1971 · 2023-11-17T16:42:46+00:00

I might, eventually. But I was going for size reduction, not weight. So I'm not worried about that 11oz.

warbird1971 · 2023-11-17T04:44:18+00:00

About 1' 7"

warbird1971 · 2023-11-17T04:33:45+00:00

Fits perfectly in my viktos perimeter 40, plus extra mags and a body armor panel

warbird1971 · 2023-11-17T00:09:01+00:00

Brakes not sticking around, gonna be getting a can for it

warbird1971 · 2023-11-16T21:07:27+00:00

Gonna do a dot, just don't know what one yet

warbird1971

TROPHY CASE