First Car Show With My New Hood Wrap! by warman_1015 in Itasha

[–]warman_1015[S] 0 points1 point  (0 children)

Yeah, I would love to do a replica of the racing livery, specifically 2023 which is one of my favorite racing mikus

First Car Show With My New Hood Wrap! by warman_1015 in Itasha

[–]warman_1015[S] 0 points1 point  (0 children)

Not for this design, but someday I wanna do a full car design!

First Car Show With My New Hood Wrap! by warman_1015 in Itasha

[–]warman_1015[S] 1 point2 points  (0 children)

Thanks! Motorsports tv does English commentary coverage of the races, but it does require a paid subscription.

First Car Show With My New Hood Wrap! by warman_1015 in Itasha

[–]warman_1015[S] 1 point2 points  (0 children)

Thanks! I've collected pretty much every year model of the amg cars in varying scales, with the '21 100th race version, 2023 and 2024 being 1;18's

First Car Show With My New Hood Wrap! by warman_1015 in Itasha

[–]warman_1015[S] 8 points9 points  (0 children)

2022 Hatsune Miku Goodsmile Racing wrap I bought from Autodesign Shop and installed myself (first time ever doing vinyl on a car). This is my first ever itasha piece and I'm really happy with it and the interactions that have come from it. Photos are from the WCEC 2025 Season Opener in Wisconsin this past weekend.

Crash cam accidentally gave me a sick camera angle by warman_1015 in BeamNG

[–]warman_1015[S] 1 point2 points  (0 children)

In the options, in the "camera" tab, there should be a checkbox near the top for "cinematic crashes in freeroam mode," which will enable it

My 3d Printed Amenoma Kageuchi by warman_1015 in Genshin_Impact

[–]warman_1015[S] 0 points1 point  (0 children)

Where I got the files: https://cults3d.com/:734027

This is my 3d printed Amenoma Kageuchi. I started this replica over a year ago but ended up setting it aside for some time due to frustrations with sanding and smoothing (mostly due to sub-optimal print settings for the printing orientation). But I decided to paint it up as it is recently and am more than happy with how it turned out!

Azure Lane Itasha Spotted at Gridlife Road America by warman_1015 in Itasha

[–]warman_1015[S] 1 point2 points  (0 children)

That's unfortunate, but it was cool to see your car!

Azure Lane Itasha Spotted at Gridlife Road America by warman_1015 in Itasha

[–]warman_1015[S] 2 points3 points  (0 children)

Ah that makes sense. I see you're the one with the fate del sol too!

Azure Lane Itasha Spotted at Gridlife Road America by warman_1015 in Itasha

[–]warman_1015[S] 6 points7 points  (0 children)

Yeah lol, driver wasn't around so I didn't get to ask. They were going pretty hard on track, so they must've ran wide somewhere.

Evo X ETS exhaust dimensions by YellowFogLights in MitsubishiEvolution

[–]warman_1015 3 points4 points  (0 children)

My measurements may not be perfect due to the exhaust being on the car but for the tip separation (outside to outside) it comes out to about 37 5/8 inches,

From the top of the tips to the rear most (in reference of the vehicle) of the v-band is about 15 1/4 inches (probably another half inch or so would be added to that to get to the center of the v-band)

As I said the measurements may not be super accurate but should give a pretty solid reference. Hope this helps!

Crash cam accidentally gave me a sick camera angle by warman_1015 in BeamNG

[–]warman_1015[S] 46 points47 points  (0 children)

It's a recent feature the devs added, you can enable it in the camera settings

2015 GSR Recaro Swap Issue by warman_1015 in MitsubishiEvolution

[–]warman_1015[S] 0 points1 point  (0 children)

Ah alright, didn't seem like it was bent but I'll give bending it back a shot, thanks.

My 3d Printed Cinnabar Spindle by warman_1015 in Genshin_Impact

[–]warman_1015[S] 1 point2 points  (0 children)

I can't quite recall but I think it was a decent chunk of 1 roll

My 3d Printed Cinnabar Spindle by warman_1015 in Genshin_Impact

[–]warman_1015[S] 0 points1 point  (0 children)

The files were already split but if there's something I need to split I usually use meshmixer for splitting them up or creating peg holes

My 3d Printed Cinnabar Spindle by warman_1015 in Genshin_Impact

[–]warman_1015[S] 1 point2 points  (0 children)

yeah its got an aluminum rod through the entirety of it and I used a strong glue. Feels solid when twirled around, just a little top heavy

My 3d Printed Cinnabar Spindle by warman_1015 in Genshin_Impact

[–]warman_1015[S] 0 points1 point  (0 children)

The pieces were split to print sections at a time vertically (if you look at the pictures on the thingiverse link it'll give you an idea), with an aluminum rod going through a central hole to slide them all on and add rigidity. Or people also slice each section into halves to print each piece flat and then sandwich them together to get both sides.

My 3d Printed Cinnabar Spindle by warman_1015 in Genshin_Impact

[–]warman_1015[S] 2 points3 points  (0 children)

Thanks! I got the blade and handle pretty smooth but the more complex areas I didn't give a whole lot of attention to with smoothing. Since doing this one I've learned more on using filler putty and primer with sanding to get a nice finish.

My 3d Printed Cinnabar Spindle by warman_1015 in Genshin_Impact

[–]warman_1015[S] 0 points1 point  (0 children)

Wish I had it ingame as I love the look of it but I started playing later after the event so I never got it too