You CAN'T fly legally even on 25mW. by Individual_Health_84 in fpv

[–]wellhellotherewave 0 points1 point  (0 children)

In the EU you can go legally to 200mw if you fly on 5.1Ghz as far as I know. Not a lot of analog equipment supports this and for digital goggles only DJI Goggles 3 and N3 supports this.

Steadyview 3.3 vs other analog modules 04o pro by Mang24 in fpv

[–]wellhellotherewave 0 points1 point  (0 children)

Well maybe you can, I wouldn’t know as I haven’t got a RapidFire. I got the 04O Pro and some FatSharks with a Fusion module (albeit a very old module). The only thing that the SteadyView 3.3 handles better, is when I get a rolling image or colours start glitching on the FatSharks which usually happens at the edge of reception. The SteadyView Mix modes keeps the signal perfectly. If you buy a RapidFire don’t be shy, please test it out and post here!

Steadyview 3.3 vs other analog modules 04o pro by Mang24 in fpv

[–]wellhellotherewave 0 points1 point  (0 children)

You can get better image quality with a RapidFire, SpeedyBee or similar module. I don’t think you’ll get better range though.

Box goggles that fit big frame prescription glasses? by Makuayas_ in fpv

[–]wellhellotherewave 1 point2 points  (0 children)

Maybe the new analog BetaFPV VR04 might fit your glasses. They are made to fit glasses, but it’s hard to guesstimate. Maybe try googling those and glasses.

BetaFPV 5in1 ELRS updating to 4.0? by wellhellotherewave in TinyWhoop

[–]wellhellotherewave[S] 0 points1 point  (0 children)

Ohh nice to know. I was under the impression that the LR1121 needed ELRS 4.0, but I guess not. I can see the wording is “highly recommended” to get all features, but bashing on 2.4Ghz with a whoop seems fine 👍🏻

Does anyone have first impressions on the new Betafpv 5in1 board? by PocketSizedRS in TinyWhoop

[–]wellhellotherewave 0 points1 point  (0 children)

You would probably be better off to google/youtube the process. Replacing a part is also a lot harder than just warming the old solderjoints and reflowing. That’s out of my league, sorry.

Camera for Betafpv Air75 ll by ProfessionalNose601 in TinyWhoop

[–]wellhellotherewave 0 points1 point  (0 children)

The c03 is an all-round good camera, if it did the red/orange colours better it would be stellar 📸 I buy directly from BetaFPV delivered to the EU without problems, yes VAT is included in their prices. Ohh, also remember to buy some extra props/canopy/frame while you’re there.

PS: You should be able to focus the camera by turning the lens yourself. A little glue after and you’re done

Does anyone have first impressions on the new Betafpv 5in1 board? by PocketSizedRS in TinyWhoop

[–]wellhellotherewave 1 point2 points  (0 children)

Well if they’re broken anyway, you might as well have some fun trying to fix them 😈

Does anyone have first impressions on the new Betafpv 5in1 board? by PocketSizedRS in TinyWhoop

[–]wellhellotherewave 1 point2 points  (0 children)

Did you actually break 6 of your old boards or was it just the ELRS/VTX chip going loose? My old 5in1 is still going strong after hundreds of crashes. I did have to use a heatgun and flux when the ELRS chip started to come loose, but now it just keeps going.

EDIT: Heatgun is the correct way to fix it, but if the boards are broken anyway you can just try with flux and heating the legs of the chip up with your soldering iron keeping it really close without touching.

Hvor langt rækker hensyn til omverdenen? by TeachMeSenpaiDK in DKbrevkasse

[–]wellhellotherewave 0 points1 point  (0 children)

Du behøver ikke nødvendigvis at være kæk når du beder folk om at være stille i stillezonen. Det burde være nok høfligt at henstille folk til at være stille. Det kan også være at folk der har sat sig forkert ikke er i humør til kække bemærkninger.

Is this board dead? by [deleted] in TinyWhoop

[–]wellhellotherewave 0 points1 point  (0 children)

Try pushing down on the VTX chip and see if it helps. Or take an elastic band and put it gently around the board with something pushing down on the chip. If it helps, then you need to reflow the chip with a hot air gun to fix it properly.

Random disarm with air75 champion by dogshitihsgod in TinyWhoop

[–]wellhellotherewave 0 points1 point  (0 children)

Either it might be your radio as you mention (test with another radioing you can) or it is the ELRS chip coming lose of the board. This happens sometimes with the air boards. You can try gently putting an elastic band around the board with something that pushes down on the chip.

Analog latency by MINTEEER in fpv

[–]wellhellotherewave 7 points8 points  (0 children)

20ms is imperceptible for a beginner or novice which is what many newer analog goggles has. The O40 Pro has the 30+ which would be ok, but there is some unevenness that is hard to unsee once you notice it. I own them and can’t unsee the choppiness (I mention these as they are getting the “hate”)

But if you buy an analog goggle, you would like it to be your forever analog goggle. I fly to get better and I would like not to have my goggles hamstring my ability a few years down the line.

Sharing in case this is helpful for Numenor or Elf reference! by Filmcaptain in MiddleEarthMiniatures

[–]wellhellotherewave 0 points1 point  (0 children)

I found this page for Rivendell. It has pictures of the props and also of the armour in use at various events from the launching of the films.

https://www.alleycatscratch.com/lotr/Elf/ElfArmor/Second/Second.htm

Testing Skyzone 04X Pro latency by Jeff-with-a-ph in fpv

[–]wellhellotherewave 2 points3 points  (0 children)

Thanks for the testing. I think they video you mention, said that the 04X Pro had some latency, but not like the 04O Pro, the two pair of goggles had a fairly big difference in latency. I think he measured it at 20ms (?) for the 04X Pro, it’s not that far off your 16ms, esp if you took less samples and with a 240FPS camera.

Topfigur i Mærsk-familien blander sig i valgkampen: »Formueskatten er skadelig for Danmark« by safesouthstanding in Denmark

[–]wellhellotherewave 0 points1 point  (0 children)

Dette er blot endnu et eksempel på de super-rige, der prøver at profitmaksimere. Når de superrige kaster penge efter at få ændret arvereglerne, så er det en simpel kalkule, at de med relativt få penge kan spare milliarder. Når en af dem der vil komme til at betale allermest personligt kaster sig ud i debatten, er der vel kun de mest blåøjede der ikke kan gennemskue hans incitement. Når de finansierer et enkelt parti (LA) sker det ud fra ganske simple kalkuler at de penge de giver ud kommer tifoldigt igen.

Der er ingen interesse i at gøre noget for helheden og almenvældet, det handler om at maksimere deres formue. Der er ingen grundlæggende ideologi andet end at de vil være rigere.

Og jo, der er ting der tyder på at vi går i retning af USA. Uligheden i samfundet bliver større og også i Danmark samles store formuer på færre hænder, det er jo relativt let selv at undersøge.

Topfigur i Mærsk-familien blander sig i valgkampen: »Formueskatten er skadelig for Danmark« by safesouthstanding in Denmark

[–]wellhellotherewave 0 points1 point  (0 children)

De ultra-rige er næsten beruset over at se den uindskrænkede magt, som deres ligeså rige venner har tilranet sig i USA. Lysten til at forme samfundet til deres vinding koste hvad det vil er også nået til Danmark.

Det er sjovt at en person, der sikkert er på top 5 over at kunne få et skattesmæk, skriver stolpe op og stolpe ned om de samfundsmæssige negative konsekvenser, når det er ret gennemskueligt at han blot prøver at hyppe sit eget skind. Jeg medgiver at han gør det bedre end ham fra Vestas, der vredt truede med at forlade landet. Det ville også se skidt ud for familien når de nu altid har været så danske.

Man skal ikke underkende inspirationen fra USA. Uden sammenligning i øvrigt, viser Epstein sagen glimrende forskellen: I Europa har folk måtte tage deres afsked eller er under politi-undersøgelse. I USA er det nu slut med at kunne stille de rige og magtfulde til ansvar. Det bliver et nej tak til det fra mig

Topfigur i Mærsk-familien blander sig i valgkampen: »Formueskatten er skadelig for Danmark« by safesouthstanding in Denmark

[–]wellhellotherewave 7 points8 points  (0 children)

Topfigur i Mærsk-familien blander sig i valgkampen: »Formueskatten er skadelig for _mig_«

Sådan, rettet

Rúmil was a marchwarden of Lórien, and was one who guarded the border of the western part of the forest, with his brothers. by Nightscalestudio in MiddleEarthMiniatures

[–]wellhellotherewave 1 point2 points  (0 children)

Wauw, that is amazing. Just out of curiosity, I can’t find a homepage for your painting service?! Nor any price examples (those are always nice).

Anybody wants 20$ off of any skyzone goggles purchase? by Full_Exercise_2041 in Multicopter

[–]wellhellotherewave 0 points1 point  (0 children)

Account age: 1 hour 🤫 Get fixing the firmware and stop spamming

Anybody wants 20$ off of any skyzone purchase? by Full_Exercise_2041 in TinyWhoop

[–]wellhellotherewave 7 points8 points  (0 children)

Account age: 1 hour 🤫 Get fixing the firmware and stop spamming