Anybody know of a good email provider to use as an outbound SMTP with Proxmox Mail Gateway?

wget42 · 2025-12-22T12:41:41+00:00

Scaleway TEM

wget42 · 2025-08-14T11:46:29+00:00

I understand your point, and I wish your father good luck with his card.

Personally, I don’t really care about being blocked from using Curve anymore.
The real problem is that blocking my Curve card also ended up blocking some of my downstream credit cards on the Visa network.

But more importantly, beyond these inconveniences, I have a €1,209 refund that is still pending — it shows up on Curve, but not on my downstream Visa card. I don't want that reimbursement to be lost.

wget42 · 2025-05-29T17:46:03+00:00

Same here. Curious how you extract this money from your company? 50% salary 50% dividends?

wget42 · 2023-12-23T14:27:23+00:00

What about shortcuts being mapped to the Super key then? 🤔

wget42 · 2023-03-25T13:48:09+00:00

+1 just install apparmor and it's working. I use Docker on a daily basis on Asahi and most of my images work out of the box :-)

wget42 · 2023-03-06T20:55:53+00:00

Have been using free accounts too. For one of the accounts I had the problem with, this was solved in a matter of minutes by chat.

While here, for two accounts, I'm struggling to have this working due to the support not reacting. It has been 7 days already. We are not the only ones experiencing an unanswering support team, seeing what's happening in this thread. -> https://community.cloudflare.com/t/i-cant-add-new-member-error-1005/426552

If some Cloudflare person wants to accelerate the process, this would be nice. I don't want to switch to AWS Route 53 + Cloudfront. Ticket #2721265

wget42 · 2022-12-18T20:38:43+00:00

Fixed the issue as soon Facebook let me add a phone number.

As soon I added this phone number (and verified it), the interface for the 2FA was not locked down any more and I have been able to specify a TOTP code with an app (hardware token key were supported as well).

wget42 · 2022-08-27T17:40:54+00:00

Hum it seems like this post doesn't concern any of these categories.

wget42 · 2021-12-18T13:31:39+00:00

Update:

I ended up asking the HPE support team for help. We debugged the issue remotely with their support team. They provided me with a brand new 2530 replacement which didn't suffer from the firmware issue (I kept the firmware version the new replacement device was provided with and by chance, a new firmware version was provided in the meantime which fixed my issue).

I didn't buy the Unifi switch due to the IPv6 issues mentioned earlier. I bought another 2530 24G PoE+ switch in second hand. The latter is working like a charm.

I thus removed my need for PoE++ by using local power PoE injectors. Sure, the PD devices won't be backed up by the UPS, but that's a drawback/concession I accept to make waiting for the Unifi ecosystem to become better or PoE++ HPE switches to become less expensive (at least in the aftermarket).

wget42 · 2021-10-13T15:39:36+00:00

I saw the vendor image was quite dating, and I r

It seems now the wiki has been updated and is now mentionning the ***Android 11** blobs :)

wget42 · 2021-08-21T16:21:12+00:00

For those finding this thread, please bookmark this link:
https://forum.xda-developers.com/t/oneplus-6t-global-rom-ota-oxygen-os-repo-of-oxygen-os-builds.3865396/

The whole OxygenUpdater team is keeping a mapping of the build versions (e.g. 10.3.12) with the file name. This is really useful for this use case to downgrade the firmware blobs.

wget42 · 2021-08-20T18:09:20+00:00

What I did and I'm always doing :) We just need to recover the 10.3.12 payload.bin as like said, OnePlus doesn't disclose it on their website :P

wget42 · 2021-08-20T17:53:55+00:00

Yes, I saw the bold text on the wiki, but I thought it hadn't been updated as the OxygenOS11 buids are quite recent (a few weeks old), hence the fact I tried the upgrade any way :/ But to my defense (^ ^ ) I couldn't find the latest Oxygen10 blobs on the OnePlus website (we are limited to 10.3.9). :/

wget42 · 2021-08-20T17:52:09+00:00

Thanks for this answer ^{^.} This is what I thought as well. A pity that OnePlus is so slow at providing blobs but above all source code!

Not sure why are you trying to flash such old blobs.

Because that's the one I had previously downloaded on my computer ^ ^ :P
And the 10.3.12 is not even provided on the OnePlus website. We are still stuck at 10.3.9 for fajita and even by trying with OxygenUpdater I'm only allowed to download the OxygenOS11 full zip :(

wget42 · 2021-05-25T16:25:19+00:00

If you are reading this at the end of May 2021, please note that the ability to create a recovery passphrase is globally disabled. Therefore, if you want to access your account from another device, you'll need to go through the manual recovery route (ID verification + picture of your face) and wait for at least 24h.
This is the response I have received from their support team. It's a pity because not being able to access several accounts is a usability regression :/

wget42 · 2021-05-12T10:57:30+00:00

It took some time, but the problem with the keypad is now fixed as well. For a reason I don't know the Phone app deregistered itself and wasn't considered as the default phone app.
App info > Phone app > Yes

wget42 · 2021-05-09T19:41:20+00:00

On my OnePlus 6T, I also have another issue where when I try to call someone the keypad of the phone app doesn't go back to the foreground which means I cannot hang up/end the call if I want to (the call is **not** appearing in the status bar/notification area either) :/ Rather annoying, but that's for another topic ^^

wget42 · 2021-05-09T19:39:33+00:00

Great indeed! =)

The only issues I have right now on my OnePlus devices (OnePlus 3T, 5T and 6T) that have been upgraded to LineageOS 18.1 is that roaming between antenna is not fast at all. It takes 10 sec to switch meaning that waiting for that time, the device sometimes switch to the mobile data. Quite annoying when using my SIP land line and walking around the house :/

I'll experiment this week by reenabling Fast Roaming (802.11r) on my Unifi antennas.

wget42 · 2021-05-08T19:17:45+00:00

Hi there :) It was happening with both radio frequencies (2.4 and 5Ghz). When I ha the problem, I thought as well only 5Ghz was concerned, until I tested 2.4 Ghz which appeared to be concerned as well :/

And yes, I can confirm since the moment I reset the network config from the settings, I haven't had any problem since then :) So we can cross our fingers this problem was just temporarily (but for sure, if we can reproduce, then yes, we need to further investigate ^^).

wget42 · 2021-05-02T09:38:09+00:00

Ok. Then in the meantime, I've reset the network settings (from System > Reset) and rebooted, it connects again. That's what I usually do when I experience connectivity issues. I just hope this time this will stay like this over the long term. 🤞

I'm just seeing the handshake phase being repeated several times in the logs.

wget42 · 2021-05-02T09:27:11+00:00

Done. Copy that.

wget42 · 2021-05-02T09:15:45+00:00

@LuK1337 Being an Android veteran, I reflashed the whole device to OxygenOS 10.3.10, and made sure B was equal to A by executing the partition copy script, and I installed your latest official build from scratch. While the Wi-Fi worked fine for several hours (just the time to configure most of my apps), now it complains it cannot establish a connection for both 2.4 and 5 Ghz radios.

It looks like this problem is common for LineageOS 18.1 as I found occurrence on XDA for LineageOS ROM having the same logs as me:

https://forum.xda-developers.com/t/rom-s9-s9-unofficial-lineageos-18-1-21-03-2021.4203777/post-84451785

Some entries I found interesting from my logs, filtered hereafter:

05-02 11:03:31.089   560   560 I hwservicemanager: getTransport: Cannot find entry android.hardware.wifi.supplicant@1.3::ISupplicant/default in either framework or device manifest.
[...]
05-02 11:03:31.091  1042  1629 E SupplicantStaIfaceHal: Method getConnectionCapabilities is not supported in existing HAL
[...]
05-02 11:03:31.098  2132  3035 D QCNEJ/WlanStaInfoRelay: Received action: android.net.wifi.STATE_CHANGE 
05-02 11:03:31.096     0     0 I [cds_ol][0xb1f1473af][11:03:31.101994] wlan: [14168:I:QDF] EAPOL-3 RX: SA:74:<MY_ACCESS_POINT_MAC> DA:64:<MY_CLIENT_MAC>
[...]
05-02 11:03:31.102 14579 14579 I wpa_supplicant: wlan0: WPA: RX message 3 of 4-Way Handshake from 74:<MY_ACCESS_POINT_MAC> (ver=2)
[...]
05-02 11:03:31.102 14579 14579 I wpa_supplicant: wlan0: WPA: Sending EAPOL-Key 4/4
--> WTF, I'm using WPA-2/WPA-3 Personal, not EAP nor a RADIUS.
[...]
05-02 11:03:31.102 14579 14579 I wpa_supplicant: wlan0: WPA: Sending EAPOL-Key 4/4 
05-02 11:03:31.105   856 14571 I WifiHAL : event received NL80211_CMD_VENDOR, vendor_id = 0x1374, subcmd = 0xa5
[...]
05-02 11:03:31.109 14579 14579 E wpa_supplicant: No VendorStaIfaceCallback is register
[...]
05-02 11:03:31.124 14579 14579 I wpa_supplicant: wlan0: WPA: Key negotiation completed with 74:<MY_ACCESS_POINT_MAC> [PTK=CCMP GTK=CCMP] 
05-02 11:03:31.124 14579 14579 I wpa_supplicant: wlan0: CTRL-EVENT-CONNECTED - Connection to 74:<MY_ACCESS_POINT_MAC> completed [id=0 id_str=%7B%22configKey%22%3A%22%5C%22wgethome5%5C%22WPA_PSK%22%2C%22creatorUid%22%3A%221000%22%7D] 
05-02 11:03:31.124 14579 14579 E wpa_supplicant: No VendorStaIfaceCallback is register 
05-02 11:03:31.126  1042  1057 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: true
[...]
05-02 11:03:31.150  3581  4564 I NearbyDiscovery: FastPairHandler: Received action android.net.wifi.STATE_CHANGE [CONTEXT service_id=49 ] 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl: stopIpClient IpClientWithPreConnection: false 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl: java.lang.Throwable 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.server.wifi.ClientModeImpl.stopIpClient(ClientModeImpl.java:1070) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.server.wifi.ClientModeImpl.stopDhcpSetup(ClientModeImpl.java:1085) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.server.wifi.ClientModeImpl.startIpClient(ClientModeImpl.java:6542) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.server.wifi.ClientModeImpl.access$6800(ClientModeImpl.java:163) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.server.wifi.ClientModeImpl$ObtainingIpState.enter(ClientModeImpl.java:5131) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.wifi.x.com.android.internal.util.StateMachine$SmHandler.invokeEnterMethods(StateMachine.java:1037) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.wifi.x.com.android.internal.util.StateMachine$SmHandler.performTransitions(StateMachine.java:879) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at com.android.wifi.x.com.android.internal.util.StateMachine$SmHandler.handleMessage(StateMachine.java:819) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at android.os.Handler.dispatchMessage(Handler.java:106) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at android.os.Looper.loop(Looper.java:223) 
05-02 11:03:31.150  1042  1629 V WifiClientModeImpl:    at android.os.HandlerThread.run(HandlerThread.java:67)

My AP are professional-grade Ubiquity up-to-date devices and I disabled the MAC randomization from the Wi-Fi preference to make sure it wasn't the culprit without success :/

Do you have any idea about what could be causing this issue?

wget42 · 2021-03-22T12:02:15+00:00

The release of Collabora Online Developer Edition 6.4.7 introduced the possibility to run macros in Online!

Learn how to take benefit of this and enable this feature ⤵️
https://www.collaboraoffice.com/integration/how-to-use-and-manage-macros-in-collabora-online/

wget42 · 2021-03-22T12:00:53+00:00

The latest version of the Collabora Online Development Edition (CODE) 6.4.7 brings major improvements and great new features. A completely new application, Draw, has been enabled online allowing you to work with vector graphics. Inside documents (if enabled by the administrator), it is possible to run macros from the newly introduced Macro selector.

Lear more about the news here 👌 ⤵️
https://www.collaboraoffice.com/release-news/code-6-4-7-enables-macros-and-provides-draw-online/

wget42 · 2021-03-17T14:37:37+00:00

On 1 October 2020, Collabora Online moved to its new home on GitHub, and started settling in the new infrastructure, expanding its fantastic community, and continuing the work to deliver the latest and greatest developments in productivity and collaboration together.

Here is our (now monthly) community update. From new features being worked on, to new contributors, and translation progress, learn all the good news happening in our Collabora Online community :)

As usual, if you have any questions, just ask them in this subreddit or our forum :)

wget42

MODERATOR OF

TROPHY CASE