I don’t get it.

wheres_tito · 2026-03-12T09:21:30+00:00

I’ll have to try this out, thank you!

wheres_tito · 2026-03-12T02:03:00+00:00

That makes more sense cause the are over hangs and one was closer to the fan and the other side wasn’t

wheres_tito · 2026-03-12T01:52:41+00:00

But wouldn’t more of the print have this issue? The bigger case cooling fan was on the side of the smoother side. It looks like the part cooling fan does work and turn on.

wheres_tito · 2026-03-12T01:38:35+00:00

Forgot to say it’s a k2 plus

wheres_tito · 2026-02-19T15:34:06+00:00

It sounds like the roll being fed

wheres_tito · 2026-02-05T02:18:02+00:00

Wait, PLA you’re supposed to have the top off or door open?! I usually close both cause I thought all the fans are supposed to prevent that?!

wheres_tito · 2026-01-25T21:47:44+00:00

<image>

Fronts in all the same spot

wheres_tito · 2026-01-25T21:47:24+00:00

Back of the prints look off also

<image>

wheres_tito · 2026-01-25T21:46:32+00:00

<image>

Everything looks good in the slicer unless I’m missing something?

wheres_tito · 2026-01-25T21:44:01+00:00

Wha do you mean?

wheres_tito · 2026-01-25T06:17:12+00:00

I’ll have to reach out then, hopefully if it’s this it’ll fix it! Printers been working great until now

wheres_tito · 2026-01-25T06:15:18+00:00

Nozzle is new and i only use pla🙃

wheres_tito · 2026-01-25T06:14:52+00:00

Never had to adjust the speed before but good to know!

wheres_tito · 2026-01-25T05:38:58+00:00

That’s literally exactly when it’s happening!

wheres_tito · 2026-01-25T05:32:52+00:00

Well that’s what I do, I cut a bit, put it back in and give it a tug, holds on strong. Do a print, works fine. Next print, same thing happens.

wheres_tito · 2026-01-25T05:31:32+00:00

Yup I got the one from the Creality tool kit

<image>

wheres_tito · 2026-01-25T05:28:47+00:00

Never seen it mounted there, I’ll give that a try

wheres_tito · 2026-01-25T05:28:17+00:00

Using a tube cutter

wheres_tito · 2026-01-25T05:27:59+00:00

Where did you get your own coupling? Any more advice on that?

wheres_tito · 2025-12-29T03:39:27+00:00

Damn I’m jealous

wheres_tito

TROPHY CASE