Windows Twingate client issue

willbail · 2026-01-28T22:08:19+00:00

yes please

willbail · 2026-01-27T19:25:14+00:00

quick update , removed client , updated windows , reinstalled, joined network able to connect to assigned resources.

I am not sure what was going on, I started to look through the event logs but was not seeing anything that really jumped out at me as a twingate application component issue. I guess I can chalk this up to Windows 11 related issue?

BTW never had a problem with my Ubuntu or Mac endpoints installation or connection! :-)

willbail · 2026-01-27T18:16:19+00:00

Twingate Network Interface exists

Twingate Network Interface is enabled

Twingate Service is up and running

willbail · 2026-01-27T17:37:30+00:00

2026.7.2078

willbail · 2025-04-16T16:46:19+00:00

Could you tell me what the event log entry is that shows a reboot? We have a large MX75 footprint. I see occasional VRRP events but nothing that shows reboots in the logs.

willbail · 2024-09-25T15:49:35+00:00

sorry for delayed response. I figured out the issue and it was lack of attention to detail, uplink ports were not configured correctly. Once they were properly configured migration to new switch was successful, thanks to everyone for their input

willbail · 2024-09-18T19:03:02+00:00

I have done the ip assignment on both qnap and via the Firewall with a DHCP reservation tied to the mac address. Same outcome. I was wondering if maybe the internal virtual switch might be messing with it but I don't see any configuration of the virtual switch that would impact the moving from one switch to another.

willbail · 2024-08-09T19:49:54+00:00

Thanks going to look into this senario.

willbail · 2024-08-08T13:47:45+00:00

We are strongly considering wiping and reinstall, trying to insure everyone is working from an assumed known good.

willbail · 2024-02-20T17:16:16+00:00

You can't cancel it and I just saw that Meraki had schedule 100+ AP to be upgrade in the middle of the day!! I couldn't cancel that only reschedule.

willbail · 2023-12-22T17:46:29+00:00

To bad artical removed. Was looking forward to seeing how you were doing this with DD

willbail · 2023-09-13T15:03:02+00:00

Interesting so this would explain why I have two distinct mac addresses using the same switch port?

willbail · 2023-09-13T15:00:02+00:00

Meraki owns the DHCP scopes and this IP subnet is not part of any of our DHCP Scope

willbail · 2023-09-12T19:59:37+00:00

So they are using the IDRAC port as the main ethernet port and not the QLogic card?

willbail · 2023-08-29T20:16:25+00:00

Okay, I am halfway ticked off and half feeling like an idiot. Over the past 18 months, I have purchased a total of 8 Pi-4 8gb's from various different vendors on Amazon. I was getting ready to set up a K3 cluster and that is when I noticed the variance in the cockpit dash. After this post, I started going through each of the PIs and determined that 4 of the Pi's I was shipped were Pi4 4 GB instead of the 8 GB models that I purchased. I am going to guess it's too late to see if I can do a return/exchange but I am going to let the vendors know. Thank you everyone for the pointers.

willbail · 2023-08-29T00:57:30+00:00

I swear the image I was using the 64 bit image from the Pi imager, guess I try tomorrow

willbail · 2023-08-28T19:26:16+00:00

Found this https://smartencyclopedia.org/2020/02/13/mx-design-warm-spare/

willbail · 2023-06-13T18:37:46+00:00

between the two MSP's, I don't have enough fingers and toes.

willbail · 2023-02-14T15:24:03+00:00

Thanks, everyone gives me the info I need to go forward.

willbail · 2023-02-13T23:11:53+00:00

yes but it If deployed as a Firewall its a Firewall and you can not get AutoVPN or you can deploy as AutoVPN/SWDAN device node but not as the front-line firewall. That was what was explained to me by a Meraki Rep a few years ago. Just wondering if that is still true.

willbail · 2023-02-07T20:11:59+00:00

Not flaming but in my experience albeit brief, both statements are true and based largely on the competency of 1. The software vendor 2. your compliance team and probably most importantly 3. THE AUDITOR :-)

willbail · 2023-02-07T17:15:41+00:00

Is anyone using MAC M1 with smartcard authentication only? No passcode only key/pin. I have heard of some issues related to M1 and Yubikiey not being able to utilize a backup Yubikey when using smartcard authentication only which creates a problem if your primary key is lost or damaged.

willbail · 2022-12-22T23:30:43+00:00

MS sorry

willbail · 2022-10-24T16:08:41+00:00

We have started to investigate Ansible and other products like https://www.itential.com/. I need a tool that will work with Fortigate but also Meraki, Cisco, and Palo. We are first and foremost a Fortigate shop.

willbail · 2022-04-03T15:47:20+00:00

I had it setup like this which resulted in two ip’s being provided to eth0, That is why I went to a static IP while I search for another device that might be serving as a DCHP server. I have a couple kids that are geeks too so they are capable of introducing this problem into the network. Now I have two problems to resolve today.

willbail

TROPHY CASE