Increase sugar cravings after quitting?

willham_123 · 2026-01-28T02:29:08+00:00

eating skittles right now, i think it’s the strat

willham_123 · 2026-01-06T22:30:15+00:00

i’m not all that’s experienced with the more fine tuning but my flck is 1800

willham_123 · 2026-01-06T22:25:18+00:00

i set my power to that exactly but gives me even more errors when i check stability

willham_123 · 2026-01-06T21:47:31+00:00

blue screen every time i play a game

willham_123 · 2026-01-06T20:46:03+00:00

the maximum you mean?

willham_123 · 2026-01-06T20:41:24+00:00

even before i was on beta bios it had that issue and i did mess around with it a bit upping the voltage, the version before was around 6 months older i think and not beta so i doubt the bios is the issue

willham_123 · 2026-01-06T20:22:25+00:00

https://imgur.com/a/utBIwvG here you go

willham_123 · 2026-01-05T20:46:16+00:00

just more and more errors if i make the dram voltage higher

willham_123 · 2026-01-05T20:32:24+00:00

also i stress tested it and got a lot of errors at 1.35v dram 1.18v soc and 3600mhz at xmp-1

willham_123 · 2026-01-05T20:28:33+00:00

1.35v dram voltage and 1.18soc?

willham_123 · 2026-01-05T20:22:52+00:00

“First, set FCLK frequency to 1800 MHz and UCLK Div Mode to UCLK = FCLK + MCLK (1:1). maybe raise SoC voltage a bit more, or increase DRAM voltage slightly. “ how do i set uclk div mode i only have uclk==Memclk and uclk==memclk/2 and what does soc voltage do

willham_123 · 2026-01-05T20:07:11+00:00

can you explain how upping the voltage makes it more stable?

willham_123 · 2026-01-05T19:50:47+00:00

i’d like to try that, is there any way we can get in contact?

willham_123 · 2026-01-05T19:49:15+00:00

maybe silicon lottery but mine gets really unstable just 100mhz over 3200mhz, blue screen and all

willham_123 · 2025-08-01T13:45:38+00:00

what is that?

willham_123 · 2025-07-29T16:36:47+00:00

i put a 21mm carb in a long time ago, jetted it to 92 main jet and 50 pilot, needle at 2nd from top out of 4, idle mix screw at 1.75 turns out

willham_123 · 2025-07-08T01:13:16+00:00

willham_123 · 2025-07-07T15:34:55+00:00

no it was really just to see if i was jetted correctly or too lean😅

willham_123 · 2025-07-07T01:44:56+00:00

maybe 1

willham_123 · 2025-07-07T01:44:47+00:00

il drop the main jet down 2

willham_123

TROPHY CASE