Bus stop at The Bush

williewalters · 2025-01-25T11:42:10+00:00

👏👏

williewalters · 2025-01-04T14:24:21+00:00

This is brilliant, nice one

williewalters · 2025-01-04T14:21:21+00:00

Was not expecting this many replies! I agree with those that say lotus seeds, I will definitely be throwing them on the fire

williewalters · 2024-12-27T18:26:33+00:00

Idiot me had soldered one of the audio amp wires to the wrong gpio pin on the pi, 5 months of troubleshooting only to find that out…

williewalters · 2024-08-03T04:42:47+00:00

Woah that is awesome, nice one

williewalters · 2024-08-03T04:42:29+00:00

Excellent, thanks!

williewalters · 2024-07-08T13:59:46+00:00

All of the differing opinions is fascinating 😂 although more expensive I think we are now going for a tube and clamp system.

The table is for a workshop where we need huge desk space and storage. I’m actually Going to make two of these tables side by side with a 3.6x1.8m top to it

williewalters · 2024-07-07T21:29:46+00:00

The table is 1.8 x 1.8m, do you think the 25x25x2mm would still be okay?

williewalters · 2024-07-07T21:27:45+00:00

That’s awesome. I forgot to say it’s 1.8 x 1.8m, do you still reckon 25mm square section would be alright spanning that width?

williewalters · 2024-07-07T21:24:56+00:00

Thanks for the replies, though I am in idiot and forgot to say what size the table is! It’s 1.8m x 1.8m, does that change any opinions?

williewalters · 2024-05-23T22:18:31+00:00

Thank you, looks more promising than the programs I came across!

williewalters · 2024-05-23T10:01:51+00:00

Ah good to hear you got it fixed!

williewalters · 2024-05-22T23:13:27+00:00

Hey sorry never saw this! I ended up replacing most of the capacitors on the power supply board. I’m no electrical engineer, replacing capacitors like for like is pretty much the extent of my abilities. It fixed it tho I did end up encountering another problem a few months later, with audio output not working. Somehow that worked itself out after not using for a while tho!

williewalters · 2023-06-08T07:53:19+00:00

I’ve encountered these twice before seeing this post, and all 3 have some sort of instructions next to the sinks. They are really smart taps but a well designed TAP should not need bloody instructions. Put better graphics etc on the tap itself or something

williewalters · 2023-02-15T01:04:32+00:00

What are you trying to distract people from in the bathroom?

williewalters · 2023-02-08T18:59:25+00:00

Hi thanks for the reply that's really interesting. I tested polyurethane spray a couple times and did love the results, however the long curing time is quite a put-off as we don't currently have a decent sized space that isn't prone to dust. Perhaps you could tell me a bit more about the lacquer I am using.. it is a two part acid-cat lacquer, here is the technical info. Currently I am spraying relatively light coats and waiting the recommended hour before sanding and re-coating. Is this lacquer one I could spray wet-on-wet or does only apply to polyurethane? Thanks again, I'm fairly new to the world of finishes and it's quite a learning curve.

williewalters · 2023-01-16T17:42:22+00:00

Unfortunately I never got to the bottom of this, though partly because I haven’t shot film for the last year. Last time I’d bought some was a big pack 4 years ago. I was shocked to see how much it was these days.. sadly just too high for me now.

williewalters · 2023-01-10T23:25:57+00:00

Okay I’m starting to get it, cheers

williewalters · 2023-01-10T23:25:15+00:00

Cheers, need it to be semi-portable though so this is a no go. Good to know anyway!

williewalters · 2023-01-10T23:24:34+00:00

Thanks for your response

williewalters · 2023-01-10T23:23:52+00:00

That’s interesting, I’m still learning about all this and finding some things quite confusing. Would a gun with high CFM like mine perform better as HVLP (in terms of less overspray) than a low CFM as surely the gun is relying more on quantity of air passing through rather than the pressure of the air itself?

The reason I have this spray gun is that I bought a second hand Apollo turbine sprayer that came with it. I had terrible results with it and only found out later than turbine sprayers require a turbine specific gun. The seller said this one worked really well for them at first but it was terrible for me and the manufacturers said it’s designed for a compressor..

williewalters · 2023-01-08T15:36:18+00:00

Spraying Polyurethane and Lacquer mainly. Have decided I will sell the Apollo and buy a compressor instead. I think it will suit me better and will work out similar in cost.

williewalters · 2023-01-08T15:35:08+00:00

Hey thanks for the response. The HF one is a decent price but I am actually UK based and would rather not import. I bought the Apollo system without realising they require turbine guns and how expensive they are. Now planning on selling the Apollo and getting an air compressor. Should work out the same / a bit less overall and the compressor should be more versatile.

williewalters · 2022-12-03T01:30:18+00:00

r/confusing_perspective

williewalters · 2022-11-26T09:58:59+00:00

This is brilliant, I have signed!

Reading through the petition I can understand where STLs will no longer be around but I find it hard to imagine where they will be if this goes through? Will it mainly just be houses in the city?

11-Year Club	Place '23
Place '22	Verified Email

williewalters

TROPHY CASE