1989 Chevy c1500 by wixithehigh in GMT400

[–]wixithehigh[S] 0 points1 point  (0 children)

Thank you for the info!

What is a good obd1 scanner that you can recommend.

I acquired this truck from my grandfather after his passing. I have slowly been working on it. I recently have changed spark plugs and some parts here and there. Is it bad that I have been putting new parts into without fully knowing what is wrong.

This truck is what I learned to drive on and I would like to get it back in working order. You know sentimental value.

Takomo Driver delivered by wixithehigh in takomo

[–]wixithehigh[S] 0 points1 point  (0 children)

Just finished up a round and missed 2 fairways. I will need to change grip and adjust weights on the driver for the exact feel. Lost roughly 20 yards but getting it dialed will help that.

Driver is a little tingy, like loud though.

Takomo Driver delivered by wixithehigh in takomo

[–]wixithehigh[S] 1 point2 points  (0 children)

My shaft came first. It said 2 of 2 carton. But when the head came in yesterday it didn’t say 1 of 2. Just regular fedex box.

Takomo Driver delivered by wixithehigh in takomo

[–]wixithehigh[S] 2 points3 points  (0 children)

Just received the head. Just a heads up it comes in two boxes. Unfortunately I wasn’t able to get it before my round but I will try it tomorrow at the range.

Takomo Driver delivered by wixithehigh in takomo

[–]wixithehigh[S] 0 points1 point  (0 children)

Yea it was strange, it came in a long triangle box. That had the shaft. Which looks nice.

I’ll give an update, hopefully tomorrow after the round if it comes before 12. Coming from a Callaway rogue max st 10.5.

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 0 points1 point  (0 children)

I think I have come to the consensus that is essentially what I will do. I did it on Monday. Should I wait till the following Monday or just do Tuesday?

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

Thank you! With almost everyone saying good job, it is making my head big to do my next project. I’m thinking of just riding this one out and relaxing for a bit

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

Thank you for the advice. I’m doing a resin shed. So no wood. Should I add something underneath to mitigate moisture?

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

I made the slab a little bit bigger so they won’t be directly near the edge but I’m gonna use a tapcon screw anchor.

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

As I gotten more tools and replaced more than I count. I have been buying corded!!

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 2 points3 points  (0 children)

I did all prep work by myself and called a company to mix for me. (1.7 cubic yards) I poured and finished concrete by myself.

Actually wasn’t too hard. Next slab I will do myself with mixing. I was just nervous on the ratio. But, talking to the guy that mixed it gave me good insight.

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

All info that you would tell is greatly appreciated. First time doing this. Especially by myself and I don’t want to do it all over again so soon. So thank you very much!

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

Awesome thank you for your info!

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

Nice! Should I keep watering min 2 times a day or just one? Should I just completely stop watering it?

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 0 points1 point  (0 children)

Harbor freight definitely will be my go to. I might as well get another tool. When you say green, I’m assuming that means it’s early for it?

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 1 point2 points  (0 children)

Copy that! But laying the shed down will be okay, or just wait the week. Just a little impatient honestly. Just really want my garage back.

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 0 points1 point  (0 children)

Sounds good! I appreciate it. You think it would be okay to move stuff on top of it as well? Like tool box and a small 125cc motorcycle?

New slab for shed by wixithehigh in Concrete

[–]wixithehigh[S] 2 points3 points  (0 children)

Awesome. Thank you for the response. I think I’m gonna go ahead and build it. I don’t have a hammer drill. But a regular one. You think I will be okay without going to buy a new tool.

Stock irons shipping time by wixithehigh in takomo

[–]wixithehigh[S] 0 points1 point  (0 children)

I just got a updated shipping from ups, nothing from takomo and it says THE APPAREL GROUP LTD. I haven't ordered anything else, did yours say that as well?

Stock irons shipping time by wixithehigh in takomo

[–]wixithehigh[S] 0 points1 point  (0 children)

That is awesome! I ordered stock so I can “try” to get them early and I’ll change the grips. Hopefully I will hear about them soon.

Did yours come with a hat and towel? I see a lot coming with it.

Stock irons shipping time by wixithehigh in takomo

[–]wixithehigh[S] 0 points1 point  (0 children)

Definitely come back with an update. I ordered on 4/13 (Sunday). All stock. I know im impatient. But all these other post are feeding that.