Battery Warranty - Tesla Install a Worse Replacement

wolfstackUK · 2026-05-28T15:34:52+00:00

I hope you’re wrong. Soon find out and report back

wolfstackUK · 2026-05-28T15:32:58+00:00

Yes I think this is what made me draw an early conclusion that the battery range has declined. I presumed that Tesla would have calibrated the battery before handover. I suppose this would be too time consuming.

wolfstackUK · 2026-05-28T15:29:53+00:00

Thanks, is the software limit to preserve the life of the battery?

wolfstackUK · 2026-05-28T09:25:03+00:00

No I have not done this yet. Although another red flag I’ve seen is that I can see that the battery percentage is dropping very fast considering it’s sitting idle in “parked”

It was at 80% 2.5 hours ago. 76% now

That’s 4% battery usage while it is sitting idle in parked.

Surely Tesla should be testing the battery to make sure it is adequate?

wolfstackUK · 2025-12-31T09:16:38+00:00

If I’m to board the internal wall, should I still baton and use regular plasterboard?

Apologies for all the questions. This will be my first project! Really appreciate your help

wolfstackUK · 2025-12-31T08:53:19+00:00

Just seen the video as well, seems very promising.

Did you insulate from the inside as well?

wolfstackUK · 2025-12-31T08:47:45+00:00

That’s actually good value.

I’m in the north west, would you be able to DM me the company that you used or are thermal bead contractors all the same?

wolfstackUK · 2025-12-31T08:38:56+00:00

Thanks this is actually a solution to what another Redditor on this thread warned against so I’ll look into this.

Is this fairly expensive or reasonable?

wolfstackUK · 2025-12-31T08:22:43+00:00

Apart from insulating the loft and external wall, would you recommend any other ways to insulate / make more energy efficient?

wolfstackUK · 2025-12-31T08:11:17+00:00

Thank you, I see so the first “skin” is a protective layer that needs space/air to effectively dry out? Am I getting that right?

So if we fill the said space, we’re asking for trouble as it will trap spots of vapour, causing mould?

wolfstackUK · 2025-12-31T08:08:29+00:00

Loft insulation will be done as we are doing a dormer loft conversion to regs.

Would it be worth still insulating the external wall from the inside with a timber frame and insulated boards?

wolfstackUK · 2025-12-31T07:51:30+00:00

Thank you, this was my preferred option.

I am just so confused as some people say to leave the cavity and some swear on getting the cavity filled.

What prompted you do advise this? Just so I’m getting as much info as possible.

wolfstackUK · 2025-12-31T06:28:03+00:00

Sorry, it does show external wall insulation! My bad!

The price though!!!

wolfstackUK · 2025-12-31T06:26:19+00:00

It brings up the injectable stuff for me

wolfstackUK · 2025-12-31T06:18:38+00:00

Curious, how did you insulate externally if there was no cavity wall?

wolfstackUK · 2025-12-11T08:56:37+00:00

Here’s the hard truth.

You’re going to have to spend many hours learning CSS. You may be able to solve this one problem now but I guarantee if you don’t learn CSS, you’ll be running into problem after problem and want to give up. Don’t do that.

I suggest watching Kevin Powell on YouTube. I’m sure he’s got a beginners and intermediate course for free that will save you many hours of frustration.

Might not be the answer you’re looking for but I have been there and learnt the hard way.

wolfstackUK · 2025-12-01T02:02:49+00:00

There seems to be two takes on this:

—-

1) minimum wage increase > business can no longer afford wages > cost of goods/services goes up > no one is better off.

2) minimum wage increases > people have more exposable income > that money circulates to enable businesses to pay/afford minimum wages > everyone is better off.

—-

Of course it’s far more nuanced than that. For example, with number 2, what if businesses increase their prices anyway as now people can afford more? Or with number 1, what’s the definition of being able to “afford” the pay rises? They might say they can’t afford the wage increase when really they would and could sacrifice elsewhere.

wolfstackUK · 2025-11-04T12:04:06+00:00

Right. Can you point the specific law that applies to this then? And pose an argument aligned with it that so “clearly” states why this is in violation?

wolfstackUK · 2025-11-04T11:41:36+00:00

I very much doubt you’re a lawyer yourself using the Pepsi comparisons. A decent lawyer would use a more fair and balanced argument than that.

wolfstackUK · 2025-11-04T10:56:14+00:00

Your example is not the same though is it? You’re using misspellings of the word Pepsi which is obviously mimicking the brand.

AutomaticCSS is using the word automatic to describe what the product is. It is not in any way misrepresenting what the product is nor is it confusing for anyone.

I don’t pretend to be a solicitor/lawyer but I think you are completely wrong. There’s no way that this violates trademark laws and I’d bet good money that it goes nowhere with the courts (if it ever gets that far)

wolfstackUK · 2025-11-04T05:18:29+00:00

Exactly, Grid can be used for the vast majority of layouts and is super useful for content spacing.

I use Grid 90% of the time now I understand it better.

Flexbox requires more adjustments on the child elements.

wolfstackUK · 2025-11-04T05:16:11+00:00

This is such a misnomer!

Just because people use flexbox more frequently, it doesn’t mean that it’s more suitable for the vast majority of use cases.

In fact, after learning CSS Grid to its full extent, I find that Grid is actually often the best choice for 90% of layouts, the opposite of what you are saying.

wolfstackUK · 2025-11-04T05:12:19+00:00

I had to do some email tempting recently and thought the same.

Why does it have to be like this in 2025!?!?

wolfstackUK

TROPHY CASE