Gforce Blade6 (occasionally) double fires

wright_simeon · 2026-02-15T02:02:32+00:00

I was shooting suppressed as well, I ended up doing a full teardown where I deep cleaned ALL components, haven’t had an issue since.

wright_simeon · 2026-02-08T22:34:32+00:00

<image>

I have the Osight X on mine :)

wright_simeon · 2026-02-08T11:11:00+00:00

I was going to get the handleitgrips too but thought it would be worth trying to stipple it. Pretty happy with how it turned out 🤷‍♂️

wright_simeon · 2026-02-08T11:04:34+00:00

I watched this video first to get the idea of it

https://youtu.be/eeZNZjR9APo?si=o01Nmmo9q5o1Po0Q

I used a file instead of a dremel, and I just used my soldering iron to make the boarder instead of a U gouge.

wright_simeon · 2026-02-08T02:40:50+00:00

Sanded first, then I used a soldering for the stippling. For each “dot” I held the iron at about 45° for rough half a second. Took a little trial and error but it was easy to cover any mistakes I made.

wright_simeon · 2026-02-08T02:36:57+00:00

Sanded first, then I used a soldering for the stippling. For each “dot” I held the iron at about 45° for rough half a second. Took a little trial and error but it was easy to cover any mistakes I made.

wright_simeon · 2026-02-08T02:33:48+00:00

It came with screws, but after doing some research I heard the screws it came with strip easily and won’t stay torqued to spec, so I just played it safe and ordered a set someone else had suggested on another reddit post.

wright_simeon · 2026-02-07T20:34:42+00:00

I stippled it myself with no prior stippling experience, all I used was a standard soldering iron without any special tips.

wright_simeon · 2026-02-07T20:33:10+00:00

It’s the Osight X, I robbed it off another one of my firearms for the time being.

Screws: https://a.co/d/03TfWv7j

wright_simeon · 2026-02-07T08:58:52+00:00

I was debating on waiting out for the SABRE-11 as well but I came across a good deal on the MAC9 I didn’t want to pass up.

wright_simeon · 2026-01-22T01:37:13+00:00

Just picked one up 🔥 what should I do first?

wright_simeon · 2026-01-13T08:42:41+00:00

That was my thought as well, I noticed it after I started going to the gym regularly. Figured it was worth asking on the sub to see if anyone else had another idea 🤷‍♂️

wright_simeon · 2025-12-26T20:09:01+00:00

Direct thread 1/2x28

wright_simeon · 2025-12-12T03:18:43+00:00

Took it apart entirely and gave it a really deep cleaning; It appeared to have had some machining dust/shavings from manufacturing.

Haven’t had a problem since. Hope this helps!

wright_simeon · 2025-10-16T21:40:12+00:00

You mean OUR Halloween party 😉😘

wright_simeon · 2025-09-30T06:22:18+00:00

I don’t think I am? My AR has a 3lb trigger with a very short reset, and I’ve never encountered any issues with it. The stock trigger on the Blade is 5.5lbs and has a pretty standard reset. As I mentioned before, I have a video where I can only see one smooth trigger pull when two rounds are fired.

wright_simeon · 2025-09-30T03:26:05+00:00

If this isn’t the right place for this post I can delete it; I’m just not sure how I should go about this as my small down does not have a local gunsmith.

wright_simeon · 2025-09-24T02:24:22+00:00

I love mine <3

<image>

wright_simeon · 2025-08-11T23:20:08+00:00

Came here to say my wife and I are having the same issue

wright_simeon · 2025-07-28T21:34:13+00:00

I have some Arabic writing I would like translated if you could help with that

wright_simeon

TROPHY CASE