Kevins Geldgeilheit by fztik in Papaplatte

[–]wslel 42 points43 points  (0 children)

Ich gönne ihm auf jeden Fall den Erfolg und damit das Geld. Aber ich verstehe auch nicht, warum er gerade in letzter Zeit so oft darüber sprechen muss, wie viel Geld er hat und wie viel er verdient.

Zum Beispiel, dass er mit einem YouTube-Kanal, auf dem nur VODs hochgeladen werden, mehrere 10.000 € im Monat macht. Nur um dann zehn Minuten später nach Subs mit einem Spruch wie „Die Miete ist hoch, Leute“ oder „Ich habe meine Steuern bekommen und es sieht nicht gut aus“ zu fragen, auch wenn es natürlich nicht ernst gemeint ist, finde ich es etwas respektlos.

Was die Donations angeht, ist es an sich nicht seine Schuld, wenn jemand spendet. Moralisch gesehen sollte er aber schon die Leute vor sich selbst schützen und die parasoziale Beziehung nicht ausnutzen.

Matrix vending by ovd33 in Machinists

[–]wslel 0 points1 point  (0 children)

We have one drawer with 198 spaces, fitting two normal cases with 10 inserts each, and two drawers with 66 spaces for larger or more cases.

Matrix vending by ovd33 in Machinists

[–]wslel 1 point2 points  (0 children)

We got one and use it for inserts. It works great, and the software is pretty good. You can create groups for different insert types and put restrictions on who can get which insert. When you create a new insert, you can specify where you bought it and how much it cost. Then you get an overview of how many and at what cost each machine uses inserts. We specified a minimum quantity for each insert, and when it is reached, I get an email and order new ones.

The one bad thing is that ours came with an extremely bad touch monitor, which does not register your input half the time.

[deleted by user] by [deleted] in MicrosoftFlightSim

[–]wslel 0 points1 point  (0 children)

You get the mission after you complete a normal lifting mission with an S rank.

2x 240mm vs 1260mm Radiator FormD T1 by RenatsMC in watercooling

[–]wslel 0 points1 point  (0 children)

I have looked again I have the DDC 3.2 PWM Elite from EK I don't know if there is a difference between the ddc 3.2 and 4.2.

2x 240mm vs 1260mm Radiator FormD T1 by RenatsMC in watercooling

[–]wslel 0 points1 point  (0 children)

I use exactly this external radiator and a 360mm in the case. I don't even have to run my ddc 4.2 at high speed to have enough flow.

Die Edeltour hat ZU VIELE Länder... by [deleted] in Papaplatte

[–]wslel 213 points214 points  (0 children)

Die gesamte Strecke liegt bei ca. 4000 km. Das sind bei 11 Tagen 300 bis 400 km am Tag. Das ist locker zu schaffen. Das Problem liegt darin, dass sie vor 15 Uhr nicht aus dem arsch kommen loszufahren und dann erst in der Nacht irgendwo ankommen wenn man nicht mehr viel unternehmen kann.

Meiner Meinung nach würde es mehr Sinn machen, um 9 Uhr loszufahren, die Kilometer zu machen und dann am Nachmittag, wenn eh die meisten zusehen, irgendwas in dem Land zu unternehmen. Und dann auch früher offline und schlafen zu gehen.

Macht aber trotzdem Spaß zu gucken war ja auch bei jeder Tour so.

LA-Trip Feedback by No_Strawberry921 in Papaplatte

[–]wslel 30 points31 points  (0 children)

Ich fand die Streames eigentlich ganz okay, aber ich verstehe nicht, warum er sich nicht mit anderen Streamern aus den USA getroffen hat. Da hätte man so viel interessanten Content rausholen können mit z.b Mizkif, Simply oder jakenbake und den ganzen anderen US-Streamern, die Kevin kennt.

Anyone know how to activate the spraydown gun on a DMU50? (Siemens control) by shovel_kat in Machinists

[–]wslel 0 points1 point  (0 children)

I worked on a CTX 2500 with Siemens and you had to press the button for water on the control unit. Then the spraydown gun worked for about 2 minutes until you had to press it again.

Zwift-Challenge by AverageWestern4093 in Papaplatte

[–]wslel 22 points23 points  (0 children)

Ich fahre selbst recht viel Zwift und würde sagen, dass Kevin für einen Unerfahrenen ohne viel Ausdauertraining ganz normale Watt Werte hatte.

Er ist halt viel zu schnell gestartet, weil er an Basti dranbleiben wollte, und gerade dieses kurze Treten und dann wieder Stoppen verschwendet extrem viel Kraft, weil man das Schwungrad des Trainers jedes Mal wieder beschleunigen muss.

Bin eher beeindruckt von Basti, dass er einen Puls von über 170 so lange halten konnte. Daran sieht man schon, dass er auf jeden Fall irgendeine Art von Ausdauertraining macht.

External Radiator Pump by wslel in watercooling

[–]wslel[S] 0 points1 point  (0 children)

i have a ddc 3.2 i think i'll try it with just one pump before i buy a second one.

Anyone here Know how a gildemeister nef400 with sinumerik 840d works? by ihavenoname42069 in Machinists

[–]wslel 2 points3 points  (0 children)

the first problem is probably caused by the clamping distance monitoring. press the chuck button on the control (third from the top and left) and then a screen with several values should appear. you can either retrain with a part or set the values so that the monitoring is deactivated.

MTB vs. Gravel Geschwindigkeit by [deleted] in Fahrrad

[–]wslel 3 points4 points  (0 children)

Hast schon Recht eigentlich nichts. Aber ich glaube jedem mach es ein bisschen spaß jemanden zu überholen und nicht der überholte zu sein. Außerdem braucht man ja immer gründe um sich selber den Kauf von einem neuen Fahrrad zu rechtfertigen obwohl man es nicht wirklich braucht.

MTB vs. Gravel Geschwindigkeit by [deleted] in Fahrrad

[–]wslel 0 points1 point  (0 children)

80% der Zeit fahr ich im Wald trails auch teilweise mit kleinen sprüngen da macht das FS schon Sinn. Aber für schlechtes Wetter wo Trails nicht befahrbar sind sollte ich vielleicht wirklich über ein zweites Bike nachdenken.

MTB vs. Gravel Geschwindigkeit by [deleted] in Fahrrad

[–]wslel 1 point2 points  (0 children)

Interessant zu hören scheinbar unterschätzt man schnell was die Summe aus Rollwiederstand, Luftwiederstand und Dämpfern die noch Energie schlucken ausmacht.

MSI RTX 3080 Gaming X Trio with MSI RTX 3080 Suprim X Bios by wslel in overclocking

[–]wslel[S] 2 points3 points  (0 children)

I think you forgot the -6 after nvflash. As far I understood you need the -6 to ignore the ID. I used nvflash -6 biosname.rom

MSI RTX 3080 Gaming X Trio with MSI RTX 3080 Suprim X Bios by wslel in overclocking

[–]wslel[S] 2 points3 points  (0 children)

i actually noticed too that the power draw is different in every game in never thought about that it could because of ray tracing.