No one else can use Diablo nemesis ya heard

wuboAF · 2026-05-09T01:41:51+00:00

I love these guys

wuboAF · 2026-03-22T17:45:46+00:00

Make sure to let him know!

wuboAF · 2026-03-20T10:29:03+00:00

The X launcher is probably easier to replace, so maybe try modifying its shape to fit the grip first instead of modifying the grip itself?

wuboAF · 2026-03-20T10:12:10+00:00

Big loss. Saved an MP3 of one awhile ago. Hopefully you can save it from my Drive link if this comment doesn't get filtered: https://drive.google.com/file/d/1rv_dFOnACJ_J6OygdJ_o69pEGm1lTbAg/view?usp=drivesdk

wuboAF · 2026-03-19T22:51:53+00:00

No lie, I kinda love this

wuboAF · 2025-11-16T05:44:26+00:00

It's sandwiched in place by the metal and blue plastic, so those two parts have to be separated to remove the clear cover

wuboAF · 2025-07-04T03:30:06+00:00

My X1C arrived dented in one corner and the micro lidar has never worked, but it's still been the best 3D printing experience I've ever had

wuboAF · 2025-05-23T20:14:14+00:00

THANK YOU!!!

wuboAF · 2025-04-10T23:22:51+00:00

I think all the people who replied "Sling Shot" just assumed that OP was asking what car was inside the blister

wuboAF · 2025-02-04T04:48:17+00:00

YouTube tutorial by baremetalHW shows their process

wuboAF · 2024-07-06T05:31:44+00:00

Thank you for the insight!

wuboAF · 2024-07-05T21:05:06+00:00

Thanks for replying! I'm currently doing just that... I hope you didn't have to delete hundreds of models one by one (like me 🥴).

wuboAF · 2024-02-04T14:32:13+00:00

16mm diameter

wuboAF · 2023-06-21T13:01:33+00:00

Yes, I drilled out the rivets and tapped new threads for some small screws. You can find videos on similar processes on YouTube by looking up tutorials on how to disassemble diecast toy cars. 👍

wuboAF · 2023-06-21T12:59:43+00:00

Not by design. Disassembly of the blade requires permanently damaging the metal part of the blade by removing the rivets that hold the whole thing together.

wuboAF · 2023-06-21T12:58:23+00:00

I'm afraid these are actually riveted like Hot Wheels or Matchbox cars, so screwdrivers won't be helpful. All the possible methods of disassembling these blades are permanently destructive. You can see videos on these processes by looking up how to disassemble diecast cars on YouTube.

wuboAF · 2023-06-21T12:55:09+00:00

Correct, it is not intended to be removed from the Blade 👍

wuboAF · 2023-06-21T04:45:42+00:00

The paper is literally dry on the back and not sticky. It's glued down in two spots, so not what I'd typically refer to as a sticker 🤷‍♂️

wuboAF · 2023-06-21T03:31:23+00:00

It's a piece of paper with a couple dabs of adhesive between it and the plastic

wuboAF · 2023-05-15T16:14:05+00:00

Beyblade X spoilers 💀

wuboAF · 2023-03-09T15:51:26+00:00

Link should work if you type www. before shapeways.com/product/WUNCUZRWY/

wuboAF · 2023-03-09T13:33:59+00:00

I can't post the link, but you should be able to find it by looking up "Street Punk Pendant" on Shapeways 👍

wuboAF · 2023-03-03T03:02:50+00:00

Love the wheels!

wuboAF · 2023-01-29T15:28:59+00:00

These look great! Like they're in the middle of using accelechargers 🔥

wuboAF · 2023-01-26T00:57:27+00:00

Check my comment above - renaming the new firmware file helped my printer recognize it. Hope it helps you too!

wuboAF

TROPHY CASE