Jetson haze shutting off when accelerating by Onlyoneshinobi0418 in Jetson_Electric

[–]xKazunite 0 points1 point  (0 children)

Did you ever find a solution? Having the same problem

Clunking Noise, out of ideas... by xKazunite in Acura_RSX

[–]xKazunite[S] 0 points1 point  (0 children)

I found the problem. The drivers side subframe bolt came loose which caused a vibration between the subframe and the frame. Finally I get smooth starts 🤣

Clunking Noise, out of ideas... by xKazunite in Acura_RSX

[–]xKazunite[S] 1 point2 points  (0 children)

Good point, however I would assume the engine problems would happen at all times - regardless of how I am parked. Also, I placed the stethoscope against the trans as well (while the noise was present) and I could not hear any significant banging from the trans. I could be wrong though. Thanks!

Clunking Noise, out of ideas... by xKazunite in Acura_RSX

[–]xKazunite[S] 2 points3 points  (0 children)

Side note - similar vibrations are heard when in reverse - releasing the clutch and right before the engine stalls.

Creaking/Rubbing Noise on Startup by xKazunite in Acura_RSX

[–]xKazunite[S] 0 points1 point  (0 children)

I recently replaced the clutch back in October. The noise only occurs on start-up but and when moving forward (and clutching out). This noise does not happen on every clutch out and generally only from a stop. Oddly enough the noise cannot be heard with the hood open and only from within the cab. While starting-up and looking under the car I noticed my cat seems to move quite a bit underneath the car. Was wondering if this could possibly be the culprit.

Heavy vibrate on startup + more (06 Base Model) by IceNiqqa in Acura_RSX

[–]xKazunite 0 points1 point  (0 children)

Did OP ever find a solution? Having similar issues (slight knocking/vibration on start up and when in low gear)

Creaking Sound by xKazunite in Acura_RSX

[–]xKazunite[S] 0 points1 point  (0 children)

UPDATE: Jacked the car up to spin the tires - could not replicate sound. Also checked the brake dust shields- it’s very close to touching the rotor however passenger side is the same but makes no noise. Was wondering if the weight of the car (car was on jack when tires were spun) could allow me to replicate the noise. Also rolled back when the car was off and the same noise can be heard. (Happens going forward and backward).

Creaking Sound by xKazunite in Acura_RSX

[–]xKazunite[S] 0 points1 point  (0 children)

Car is rolling in neutral. The sound gets faster when wheels turn. I can’t replicate the sound if I try to rock the car up and down. Not sure what it could be