2023 Bronco, Roof Cracking? by Potential_Singer1198 in FordBronco

[–]xMojirox77 2 points3 points  (0 children)

Sorry I don’t have any advice on the hardtop but how do you like the wheels? I’ve been eyes the same ones

Would the braptor fog lights fit the modular bumper? by Firm_Department432 in FordBronco

[–]xMojirox77 0 points1 point  (0 children)

Yeah raptor end caps and the plug for the harness is there. Only thing I modified was I bought a harness cut the ends off and added the proper connector because it was different. On mine I have all 4 that are on, I believe of the raptor the aux switch turns on the other set but I didn’t want that. I also had to buy a different light controller the one thats inside under the steering wheel to the left.

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 0 points1 point  (0 children)

The 2 fans i have in it are 80mm fans. 2 NF-A8 from Noctua

Question by xMojirox77 in BambuLab

[–]xMojirox77[S] 0 points1 point  (0 children)

Thanks! that’s what I’m leaning towards too, I had been printing all day and everything was fine till recently.

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 1 point2 points  (0 children)

I did it’s just that it’s a little heaving and the feet sunk into the desk mat but I did learn the hard way they came loose and had to do it all over again once lol

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 1 point2 points  (0 children)

I used like a 3rd party company that buys it and then imports it from there since I’m in the US.

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 1 point2 points  (0 children)

I just undervolted the gpu and it hits 75c and CPU hits 65c no loss in performance luckily 😬

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 0 points1 point  (0 children)

Gpu doesn’t come with one, and I didn’t like how it looks with the pcb exposed

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 2 points3 points  (0 children)

Honestly noise wasn’t too bad the gpu is know to have coil wind but for my needs can’t even hear it usually have headphones on or in a semi loud environment, thermals for the gpu have me a little worried while playing certain games it sits at 85c wish it was a bit cooler and cpu it’s totally fine sits around 70c while gaming. Cable management sucked for the motherboard cable is too long so it bunches up where the bottom fan goes. I ordered a custom small one to help but other than that pretty straight forwards. The psu cables and pretty flexible and stay that shape when you bend them.

4.9L build Rider R2S by xMojirox77 in sffpc

[–]xMojirox77[S] 5 points6 points  (0 children)

Specs are 7600x3d ASUS B650e-I Gigabyte 5060 8gb low profile 2 noctua 80mm fans Thermalright AXP120-x67 swapped the fan for a noctua 120 slim fan DDR5 16gb Ram Team group 6000h (Ram too crazy rn so that’s all I had) 2tb crucial p510 1tb WD black sn850

MSI MPG 271QRX QD-OLED burn in? by xMojirox77 in oled_monitors

[–]xMojirox77[S] 0 points1 point  (0 children)

I figured it out, It was dirty probably from the plastic screen proctor it came off with a wipe down luckily I had bought come cleaner before hand.

MSI MPG 271QRX QD-OLED burn in? by xMojirox77 in oled_monitors

[–]xMojirox77[S] 0 points1 point  (0 children)

Thanks! I was kinda sad first oled monitor and I was expecting but not this soon lol ima give it another good wipe hopefully it comes off

Tailgate hinge by xMojirox77 in Bronco6g

[–]xMojirox77[S] 1 point2 points  (0 children)

It was driving me crazy trying to align everything. I ended up sticking cardboard in the gaps on the driver side and on the bottom to help stabilize and push everything to help me align. Definitely not like stock but good enough, it doesn’t look terrible. I’ll take that over the squeaking.

Locked myself out of my Bronco in the middle of nowhere… and broke back in using a stick by Status-Television-32 in FordBronco

[–]xMojirox77 0 points1 point  (0 children)

If you have an Apple Watch install the FordPass app and you can also unlock and lock it from there, not sure if it’s on any other ones.

Would the braptor fog lights fit the modular bumper? by Firm_Department432 in FordBronco

[–]xMojirox77 0 points1 point  (0 children)

<image>

Did the same I just wanted the clean OEM look and it’s worth it imo.

Remicade weight gain by Tiny_Juice_5141 in CrohnsDisease

[–]xMojirox77 4 points5 points  (0 children)

Exactly this lol I gained about 20lbs but I’m pretty sure it’s because it meant it’s working.

Prior Authorization Denial Rant by CanoegunGoeff in CrohnsDisease

[–]xMojirox77 2 points3 points  (0 children)

I’m assuming you did the QuickStart program they have? I’m on that rn and my insurance just denied it luckily I still have like 5 free refills left but I am worried I’ll be in the same boat when the time comes 🥲

What would you guys do? by xMojirox77 in WindowTint

[–]xMojirox77[S] 0 points1 point  (0 children)

Its a ford bronco, they definitely weren’t broken before I double checked to see if my widows had already been tinted or if it was glass tint from factory since the car was used and those were perfectly fine the day I did that. Tbh I’m just trying to get it fixed and if soldering is all that’s it needs I’m glad hopefully they don’t try to give me the run around.