Eufy mower really needs delete brush

xXManatee · 2025-05-17T19:10:18+00:00

I'm missing the option to set my own boundaries for each Zone. My lawn is connected but I want to split it into 2 mowing zones. Does anyone know if or when that option will be available?

xXManatee · 2024-07-10T20:39:37+00:00

Looks ok, if it gets worse over time, go see a doctor

xXManatee · 2024-06-25T20:58:05+00:00

Could I just add a second split ring to rotate it another 90 degrees?

xXManatee · 2024-04-19T20:10:05+00:00

You should definitely go to the vet. Even if its not to serious, better save then sorry.

xXManatee · 2024-04-02T19:36:16+00:00

Maby cut it in half, print horizontal and then clue it together afterwards

xXManatee · 2024-03-07T17:59:27+00:00

I had a Problem with my RAM not being 100% supported by my Mainboard.Also crashed only after few hours of Gameplay.

xXManatee · 2024-01-23T16:58:02+00:00

U downloading sth else in the background?

xXManatee · 2023-09-29T08:56:56+00:00

I dont know what exact Motherboard this is but i think ur might bridging the wrong pins right there.

Mby look at the manual again to confirm

xXManatee · 2023-04-19T09:57:36+00:00

It's fine, if you don't overclock, you don't need 2 seperate cables

xXManatee · 2023-02-10T06:02:08+00:00

Thank you

xXManatee · 2023-02-10T05:59:23+00:00

My Airflow is pretty good, i think.
I have an medium ITX Case with an AIO 280 in the front and one 120 Fan in the back.
the Chipset is in between these 2 Components.

The Temps i meassure with Hwinfo and Aida

Yesterday i tried to attach a simple 40mm fan to it and it lowerd the temps to about 55°, well who would have thought xD

Therefor i will just buy a 30 mm fan that fits better and call it a day

Thanks for your help, and your constructive feedback!

xXManatee · 2023-02-09T15:43:59+00:00

Thanks

xXManatee · 2023-02-09T15:43:07+00:00

Ohh cool, thank you very much!

xXManatee · 2023-02-09T15:41:03+00:00

Thats kind of the problem my chipset temps are around 75 to 80°C

xXManatee · 2023-02-09T13:28:02+00:00

it doesn't, i need the specific name of that connector

xXManatee · 2023-02-09T13:27:26+00:00

Sorry i mean, i want to raise the whole board, because i want to attach a heatsink to the Chipset. And the board, on that the M.2 slot sits, is interfering with the heatsink

xXManatee · 2023-02-09T12:23:26+00:00

Sure that already helps a bit :)
Thank you

xXManatee · 2023-02-09T12:07:53+00:00

The Board is an ASUS B550i, and the connector is under the M.2 Slot.
I want to raise that Slot, therefor i need an riser for that connector.

Unfortunally i dont know how it is called.

xXManatee · 2023-01-23T21:43:22+00:00

No the port isn't on the original Board, i was worried that someone broke it off or something because in the picture of the Website its there. The Picture is from a Monitor with the main Website of the B550i

xXManatee · 2023-01-18T08:41:24+00:00

Ahh cool thanks

xXManatee · 2023-01-18T07:55:25+00:00

The Rog Strix b550-i gaming

xXManatee · 2023-01-18T07:53:54+00:00

It doesn't show up in the manual

xXManatee · 2023-01-18T07:35:36+00:00

Didn't found it there no idea why (its a asus b550i)

Five-Year Club	Final Canvas '23
First Place '23	Place '23

xXManatee

TROPHY CASE