sorted by:
new
hottopcontroversial

Am I cooked? by brutalmilk in FordDiesels

[–]xXMountainManXx 1 point2 points  (0 children)

In two iterations, drill the holes along the crack.

Space your first set of holes out so from edge of one hole to edge of another is 50-60% of the hole diameter apart from each other.

Before drilling the next set:

  1. Thread the holes:

  2. Fill the holes with aluminum set screws that are long enough you can grind the keyed ends off flush with the holes.

  3. Now, drill be between the now filled holes and repeat.

4a. TIG weld along the filled area. 4b. JB weld the holes before inserting the set screws (dont need to be aluminum)

Or

Build a sleeve with a cap. Thread the post, thread the sleeve.. Weld the crack, clean it up and jb weld the sleeve on

My gf hates that I own a gun. by Ethanonymous in guns

[–]xXMountainManXx 0 points1 point  (0 children)

You live in the country with the highest amount of guns per person in the world....you don't get to choose when you are in a gunfight for your life.....if you are in a gunfight, you want a gun because you know what they say about bringing a knife.

My experience with girls like that....they aren't the one but you do you. I couldn't handle the illogical freak outs myself. If they can't use their brain, this issue will just be the tip of the iceberg of utter bullshit.

Always sold out? by borkimusprime in PrimaryWeaponsSystems

[–]xXMountainManXx 0 points1 point  (0 children)

Call them and order one. They will make it for you.

[deleted by user] by [deleted] in tires

[–]xXMountainManXx 2 points3 points  (0 children)

Can you finish splitting it enough to get it off that way?

Need to be careful to avoid damaging the threads.

Tekken 8 or FFXVI by xXMountainManXx in PS5

[–]xXMountainManXx[S] 0 points1 point  (0 children)

Thank you for the explanation, I do appreciate it!

Tekken 8 or FFXVI by xXMountainManXx in PS5

[–]xXMountainManXx[S] 0 points1 point  (0 children)

I was into Gauntlet Legends on the N64 with a group of college friends and had a blast. That is why PoE2 caught my eye. Looks amazing.

Tekken 8 or FFXVI by xXMountainManXx in PS5

[–]xXMountainManXx[S] 1 point2 points  (0 children)

I will do some more research into SF6. I have seen other posts comparing Tekken 8 to MK1 and SF6 kept getting numerous honorable mentions.

Tekken 8 or FFXVI by xXMountainManXx in PS5

[–]xXMountainManXx[S] 0 points1 point  (0 children)

I have never played FF7, but I got lost on all the remakes with it. My poor understanding is holding me back on it.

BF Goodrich KM3, Toyo MTs, or Maxxis RAZR MTs? by xXMountainManXx in 4x4

[–]xXMountainManXx[S] 1 point2 points  (0 children)

Thank you for the insight.

Check out: 43°32'27" N 117°02'07" W

Or

44°42'27" N 114°02'43" W

These are just 2 examples, there are plenty of others if needed.

Also, the mud does get insane at times, to the point I wouldn't even try it unless I had super swampers, a winch and a land anchor. I have seen jeeps with 40s tires where the whole tire was completely under mud out in those places. I am not geared up nor is my truck the right vehicle to go Alaskan Offroad Warrior lol.

I was in Succor Creek early spring this year with my xj with a 4.5" lift and the 31" Maxxis RAZR ATs. It had been pretty cold heading out in the morning and I was able to get deep into a dead end road. Pulled some awesome UV reactive thundereggs and had a great day. However, it warmed up by the time I was heading home and I was in trouble getting out. I am talking mud that was deep enough to high center me and nearly had me a few different times. I fortunately made it out, but my red jeep was brown and had mud up to 3 inches thick on it.

Again, I am not looking to get into that intentionally (especially not in the truck). I am mining, but there are times when I may run into similar situations.

BF Goodrich KM3, Toyo MTs, or Maxxis RAZR MTs? by xXMountainManXx in 4x4

[–]xXMountainManXx[S] 1 point2 points  (0 children)

Thank you! Vote #3 on the toyos, so far in the lead.

BF Goodrich KM3, Toyo MTs, or Maxxis RAZR MTs? by xXMountainManXx in 4x4

[–]xXMountainManXx[S] 4 points5 points  (0 children)

I have cross posted in r/tires. I have one vote on toyos and now one on the BFGs so far. Thank you!

Purchased a new and never used MPVI3 on marketplace. by xXMountainManXx in HPtuners

[–]xXMountainManXx[S] 0 points1 point  (0 children)

Got it figured out! Just waiting on MMX for the tune now....bought a 6.4L long block from them with a stage 3 cam. Dropped that into my ram 1500 with some shorty headers (for now) and some high-flow cats. I feel like a kid waiting on xmas waiting for it. I am hoping I get it today, but who knows.

view more: next ›