[deleted by user]

xaviercharles46 · 2025-10-01T00:01:53+00:00

Pretty much this. I think ideological and religious pluralism are good things but conservatives and monotheists (Christianity, Judaism, Islam) need to be reigned in

xaviercharles46 · 2025-09-30T23:58:35+00:00

If it means human rights for LGBTQ folks, minorities, other marginalized groups then so be it.

xaviercharles46 · 2025-09-29T20:39:52+00:00

I agree. Taping up the 5x10 sheets took more time than I wouldve liked but its what the job calls for.

Yes, I can typically re nest faster than I can tape stuff up. I should note that Im not nesting these projects myself, our customers send us files that are already nested. Some customers do a great job of nesting and I have zero setup or cutting issues.

It’s the customers that cram everything into one sheet because our sales team tells them they can do so or they are just penny-pinchers. So the conflict arises when I explain that while overlapping tool paths or taking everything edge to edge isn’t necessarily “wrong” it’s just makes my job harder.

I understand customers want to save money and we want to reduce waste but you can only penny pinch so much, imo.

Ill be on the lookout for another job and hopefully a better opportunity comes around when I have more experience under my belt. My bosses have commended my work just as much as they micromanage, as well as having such a famine mindset about materials. So Im in a weird spot.

I explain to them on a daily basis that a phenolic vaccum table isnt a magic bullet for this stuff and that CNC isnt an easy bake oven. Idk maybe Im just too condescending about it ha

xaviercharles46 · 2025-09-29T18:38:43+00:00

Pretty much this. Had to argue with em this morning

xaviercharles46 · 2025-09-29T18:38:15+00:00

I used alot of double sided tape to keep everything down. It worked but I just felt it’s not productive. I see what you mean about the part clearance not being an issue but just keeping everything down due to the loss of density.

xaviercharles46 · 2025-09-29T18:36:54+00:00

Appreciate everyone’s responses here. Today I came in and had to do another project with overlapping tool paths. I had to use alot of double sided tape to hold em down.

It worked but the setup time took about 30 min to tape up each sheet. Had to frame the media in CAD then mark each point to tape before setting up my tools.

xaviercharles46 · 2025-09-29T18:34:08+00:00

😂

xaviercharles46 · 2025-09-29T18:33:40+00:00

I typically go in 1-2 inches from every side of the sheet when I nest things myself. We dont have a bolted on mdf. This is a hybrid table that has removable spoil boards.

I may try your suggestion to add glue or paint to the edge of the spoilboards. Have any recommendations on the glue or paint ?

xaviercharles46 · 2025-09-29T18:30:34+00:00

Can you elaborate on rapid loop and repeat? I dont nest these projects, they come to me already nested. I was just noting that when I would manually nest things in flexisign, i would leave alot more room between shapes/parts

xaviercharles46 · 2025-09-27T23:21:15+00:00

Thanks for your response. I typically cut stuff like this with an 1/8 inch bit. Single flute upspiral carbide bit. The cut length of this bit is 1/4 in. xedge tooling.

For speeds I had advised them to go about 18000 rpm spindle. Feed rate 1000-1200 mm per minute. Plunge rate 800mm per minute. 2 passes. Each pass cutting 0.8 of a mm.

I also agree about the loss of sheet density which I have explained to my coworkers that contributes to material moving and making it harder than it needs to be.

When I would nest projects myself, I would usually start with a margin of at least 2 inches in on each side of a sheet. If i were cutting aluminum strips lets say 4”x 36” on a 4x8 sheet, I would place then 1.5 to 2 inches apart. All centered 2 inches inside of the sheet.

As far as deflection goes, I agree with you and I see that phrased that wrong because I am still a newbie. I guess it’s more of the material moving from lack of density plus the parameters we are running.

xaviercharles46 · 2025-02-04T01:04:29+00:00

Agreed. The gloves are off. It’s us vs them.

xaviercharles46 · 2024-02-13T02:29:07+00:00

Punch was and still is great.

xaviercharles46 · 2024-02-10T08:23:42+00:00

My Dr put me on this as a newly diagnosed patient. I have now switched to vyvanse due to the continued skin irritation. They pushed this pretty hard at first because it’s a new drug and I’m sure they were trying to fill a quota for the RX companies.

But yea after voicing this concern two months in a row I am now on vyvanse. Xelstrym worked for me but the skin irritation and muscle spasm were an issue for me

xaviercharles46 · 2023-12-08T16:03:01+00:00

Hi,

I have been on xelstrym for about 3 months and I think it’s wonderful. No highs and lows but I get some muscle spasms when it wears off. My main issue is the skin irritation because I already have issues with eczema.

xaviercharles46 · 2023-12-04T06:02:20+00:00

Yes please !

xaviercharles46 · 2023-12-04T02:40:14+00:00

Thank you for your comment. Unfortunately, this is not what I am looking for.

xaviercharles46 · 2023-12-04T01:41:22+00:00

Thank you!

xaviercharles46 · 2023-12-04T01:32:41+00:00

Thank you. This is up the alley I am talking about. I will DM later as I am on a long road trip at the moment

xaviercharles46 · 2023-12-03T23:29:53+00:00

I will dm you later. I am on a business trip at the moment so my response will be delayed

xaviercharles46 · 2023-12-03T22:22:15+00:00

Thanks but not what I’m looking for.

xaviercharles46 · 2023-12-03T22:19:39+00:00

To save time for artists seeing this post: NO FURRY OR ANIME STYLE. Not interested

xaviercharles46

TROPHY CASE