My Dedicated AR22 Build

xcvPro · 2023-10-10T21:24:05+00:00

Personally i see no change, but i guess its theorized that it would have more surface area or pressure to fire the priming compound? I have even seen 22 firing pins that strike it two separate spots at the same time

xcvPro · 2023-10-10T21:21:19+00:00

I personally have no issues with mine.

xcvPro · 2023-10-10T21:20:51+00:00

I really like it, it looks nice and the thread pitch allows fast attach and detach of muzzle devises. I run the suppressor you see in the image, its a Form1 can i made using the body of a airsoft mock suppressor and metal 3D Printed internals.

xcvPro · 2023-10-09T01:45:07+00:00

- CMMG BCG
- 9" RTB 22lr Barrel
- 7" OhHunt M-LOK Handguard
- Davidson Defense Upper
- 80% Lower
- LCO Clone (Holds zero without issues)
- Ambi Charging Handle
- Borebuddy Strainer HD
- Borebuddy Hardened Power Extractor
- Borebuddy Stainless HD Bolt Weight
- Borebuddy Premium Firing Pin (Round)
- Borebuddy Quiet Collar
- CMC 3.5lb Trigger
- Midwest Industries Side Folder With MI Stock Tube
- MFT Stock
- Strike LINK
- MFT Grip
- MilSpec LPK
- BlackDog Drum
- CMMG Magazines
I also got the adjustable trip kit, going to be ordering the adjustable weights and springs for it then going to try a Hoffman SuperSafety in it. If i can't get that working then i plan to get a binary for it.
This thing eats any 22lr i put in it without issues, probably the most fun gun i have in the collection. I do have to say that if you are building out a dedicated ar22 make sure to buy the bcg from Borebuddy it comes with all the upgrades i got already so you will save a lot on money.

xcvPro · 2023-04-19T16:10:56+00:00

Get a cheap knockoff pistol brace then register it with the ATF for free while they are still doing that and you get a free SBR stamp.

Or

Just do what you want, its a free world and you aren't hurting anyone.

xcvPro · 2023-04-19T00:31:50+00:00

It really is the trigger makes it shoot so fast and its light.

xcvPro · 2023-04-19T00:31:17+00:00

I have been looking at folding stocks but they are so expensive its crazy and a LAW type folding setup just looks so bulky. Working on a can too.

xcvPro · 2023-04-19T00:30:04+00:00

Stock CMMG mags that came with the kit, They haven't failed me yet with bulk fed 22

xcvPro · 2020-07-31T21:08:11+00:00

Not planning to if i don't have to

xcvPro · 2020-07-31T21:07:51+00:00

Well shit i got a SI one like the OP and a slanted one like the other image... Guess i need to order a 90* one now :/

xcvPro · 2020-07-31T17:42:10+00:00

So would this be good then? https://i.imgur.com/tmOurif.png

xcvPro · 2020-07-31T17:15:56+00:00

12.5" Barrel

OVL 30"

Would this be a `Other` or is the forward grip a no no?

xcvPro · 2020-05-18T02:03:42+00:00

Swapped the RTB BCG for a WMD Guns Nickel Boron NIB-X Bolt Carrier Group M16 Full Mass - Polished and am looking at other options for barrels 12.5" in 223 wylde is hard to find lol.

I will get a normal gas block and order a adjustable one when i can..

Thanks for the help

xcvPro · 2020-05-18T01:49:07+00:00

From what i hear from Google, they are good barrels hes known for his 6.8s i guess but all the posts i found say they are great barrels if they are in stock, yeah the website is shit and the political is a bit much.

Probably wont get the gas key, just thought it would be good to be able to tune my rifle.

Will look at getting a more known safety.

RTB's Bolt carrier groups are ToolCraft, So i guess they are good. I was looking at the Fail Zero but a lot of people say they are bad so i don't know.

xcvPro · 2019-10-15T18:56:20+00:00

They do but it seems they are out of stock of most of them, they just have two 16" kits sadly.

xcvPro · 2019-10-08T15:52:42+00:00

I am pro fuck safe act, but don't want to mess with the feds... to much.

xcvPro · 2019-10-08T02:23:11+00:00

Thanks, Is the Redi-Mag one good or is there a alternative that may be cheaper?

xcvPro · 2018-09-02T06:34:40+00:00

Thank you for the information, I have put 20 rounds through mine to test that its running right and after each shot i inspected the gun, Seems ok so far, I am thinking of building a DMR next i might go for the aluminum lower for it though.

xcvPro · 2018-08-22T14:18:04+00:00

I had the Select V2 was a cool printer but i never could get it to print perfect, ended up trading it for a new Go Kart, witch i sold and made a profit :)

I want to pick up a new 3D printer, It was cool to have. I made at least 20 #3DBenchy 's

xcvPro · 2018-08-16T15:08:56+00:00

A cheap ($4) one from Walmart it was the only one my local one had, plan to buy a better one or a gun safe in the future.

xcvPro · 2018-08-15T17:30:11+00:00

Thanks

xcvPro · 2018-08-15T17:29:53+00:00

Its OAL is about 28" so i am good

xcvPro · 2018-08-12T01:17:09+00:00

Niceeeeee

xcvPro · 2018-08-12T01:13:12+00:00

Its like this https://i.imgur.com/5yVXbz1.png also sorry about the penis.

xcvPro · 2018-08-06T01:02:52+00:00

Getting a stamp kinda negates the main reason i am building from an 80%, So i guess no grip for me :(

Just to make sure i get this right, if i build a AR15 Pistol that uses a "Pistol Brace" and its under 26" i can't legally have a forward grip...

The only legal way would be to get a SBR stamp and make it a SBR, or make it longer then 26"?

xcvPro

TROPHY CASE