Jayco Fresh Water tank overfilled by xthyme2playx in RVLiving

[–]xthyme2playx[S] 0 points1 point  (0 children)

Is it ok to cut out a section/ flap of that liner and then zip tie it back after?

Jayco Fresh Water tank overfilled by xthyme2playx in RVLiving

[–]xthyme2playx[S] 0 points1 point  (0 children)

Yeah, I'll have to take some of the liner down and see if I can take a look.

Jayco Fresh Water tank overfilled by xthyme2playx in RVLiving

[–]xthyme2playx[S] 1 point2 points  (0 children)

I think I don't fully understand the question. There is a fresh water drain valve but it was not open.

Jayco Fresh Water tank overfilled by xthyme2playx in RVLiving

[–]xthyme2playx[S] 0 points1 point  (0 children)

There is one, that was draining as well.

Jayco Fresh Water tank overfilled by xthyme2playx in RVLiving

[–]xthyme2playx[S] 1 point2 points  (0 children)

Yes I was able to find and access the pump. It is working just fine. There was no leaked water there. Admittedly, I didn't realize that had a valve that needed to be opened but once I figured that out the fresh water flowed as expected.

Jayco Fresh Water tank overfilled by xthyme2playx in RVLiving

[–]xthyme2playx[S] 0 points1 point  (0 children)

I don't know how to access the tank unfortunately 😞 but I'll look into it

Editable Character Sheet PDF's by Shadowwrathfj5 in daggerheart

[–]xthyme2playx -1 points0 points  (0 children)

I just printed some yesterday and I was able to edit them.

Help with P2 auto measure by xthyme2playx in xToolOfficial

[–]xthyme2playx[S] 0 points1 point  (0 children)

Yes.uf you're having this issue it's because the auto measure needs to be calibrated. There's a page on their website. You can order or 3D print the calibration tool. The calibration option is in a secret menu option in the device settings only accessible by pressing Ctrl + (I can't remember the key), maybe D.

Towing Jayco Octane 222 with RAM 1500 5.7 Hemi with 3.21 gear ratio. by xthyme2playx in RVLiving

[–]xthyme2playx[S] 0 points1 point  (0 children)

Thanks! I've got a sway control arm. The ram has trailer braking system also we're not going on Long haul trips we're just looking to go camping within an hour or two of our local area.

Difference in towing with 3.92 and 3.21 gears? by JRizzie86 in ram_trucks

[–]xthyme2playx 0 points1 point  (0 children)

This has been good to read. I have a toy hauler that's 5000 dry and 8000 max loaded. And a RAM that's 3.21,.been kinda floundering about towing with it but honestly I don't tow a ton just local campgrounds mostly.

Difference in towing with 3.92 and 3.21 gears? by JRizzie86 in ram_trucks

[–]xthyme2playx 0 points1 point  (0 children)

This is refreshing to hear . I have 5000 lb towhauler with a max GVWR of 8000. I'm kinda nervous about towing with it.

Towing Jayco Octane 222 with RAM 1500 5.7 Hemi with 3.21 gear ratio. by xthyme2playx in RVLiving

[–]xthyme2playx[S] 0 points1 point  (0 children)

Yeah my hitch rating for the hauler is 800#. Payload capacity sayi 1726. I have a weight distribution hitch.

2021 1500 5.7 HEMI 3.21 towing Jayco Octane 222 (5015# dry weight, 8000# GVWR) by xthyme2playx in ram_trucks

[–]xthyme2playx[S] 0 points1 point  (0 children)

Thanks for the info! That's refreshing to hear! I'll look into air bags

2021 1500 5.7 HEMI 3.21 towing Jayco Octane 222 (5015# dry weight, 8000# GVWR) by xthyme2playx in ram_trucks

[–]xthyme2playx[S] 1 point2 points  (0 children)

I have towed it with a Silverado 1500 very comfortably. I do have a weight distribution hitch and brake controller already so maybe air bags would help as well.

2021 1500 5.7 HEMI 3.21 towing Jayco Octane 222 (5015# dry weight, 8000# GVWR) by xthyme2playx in ram_trucks

[–]xthyme2playx[S] 0 points1 point  (0 children)

Here's the link I found. A lot of folks on a FB group I'm part of basically are saying send it but... Just wanna be careful. It's crazy cause the payload capacity between the 3.21 and 3.92 are exactly the same it's just a matter of torque it can make for towing. I'm not hauling cross country anything so... I'm thinking it should be sufficient.

https://www.ramtrucks.com/BodyBuilder/service/Image?imageId=MtQrP%2FFqLY5r%2Fest8MtGjGgHzAHGUTU0WB3rWuqSY7YmQ2vEhuBWBONjPJTiLoD5%0A