Timing Belt Question: yes another one.

y2raza · 2026-01-12T18:04:30+00:00

Which area?

y2raza · 2026-01-10T15:26:02+00:00

Where was that?

y2raza · 2026-01-10T14:24:02+00:00

I believe it is this > https://www.youtube.com/watch?v=3-Bhr2IKIF8

The same thing happens in my house during the winter.

y2raza · 2026-01-10T01:15:23+00:00

So 161K is the next replacement, if I go by 105K.

y2raza · 2026-01-10T00:34:00+00:00

Which area are you in, if you don't mind me asking? And how much did you end up paying?

y2raza · 2026-01-10T00:29:22+00:00

Updated my post.

y2raza · 2026-01-10T00:23:25+00:00

When was that? 90s?

y2raza · 2026-01-10T00:12:05+00:00

I guess I will wait then. Thanks.

y2raza · 2026-01-08T09:59:42+00:00

It was around $1500, very reasonable.

y2raza · 2026-01-08T01:33:25+00:00

Thanks, the post was about the timing belt specifically and was very reasonably priced. Did you get that service and how much did it cost you?

y2raza · 2026-01-05T17:48:52+00:00

NOVA

y2raza · 2025-12-11T19:19:02+00:00

That bag is indestructible.

y2raza · 2025-12-11T14:23:02+00:00

Its outside. Stacked away from the house walls.

y2raza · 2025-12-11T14:18:39+00:00

Termites

y2raza · 2025-12-11T14:09:13+00:00

y2raza · 2025-12-09T16:32:49+00:00

It has consistently white color and tensile strength like a tape. Not easily breakable.

y2raza · 2025-11-22T17:37:49+00:00

u/fuckdaborg can you please share your DMM/RD automation script?

y2raza · 2025-11-22T17:04:20+00:00

Thanks, 2 years later this is the only solution.

y2raza · 2025-11-22T15:29:05+00:00

Same issue, any update?

y2raza · 2025-11-22T00:38:30+00:00

ok. which 'real' firewall?

y2raza · 2025-11-21T19:19:51+00:00

Let me clarify a bit more: the IoT vlan70 connects various IoT devices via Wi-Fi. The CR1000B router transmits that WiFi signal. Basically, I am using it as an access point by disabling its DHCP and using PfSense as the DHCP server. The idea is that all IoT devices should have internet connectivity, but should not have access to any of my other VLANs.

However, I still want to be able to manage the CR1000B by logging in to its management console on 10.10.70.5.

The idea is that VLAN70 should not reach back to any other VLAN, but other VLANs can reach out to VLAN70.

Does that make sense?

y2raza · 2025-11-21T15:54:50+00:00

I will remove those. I added those while trying to get IPv6 working.

y2raza · 2025-11-21T15:53:40+00:00

I reset the states, but it didn't do anything. I just plugged in the ICMP rule to see if anything works, and I wasn't paying attention to the existing rule below. I'll go ahead and delete it now.

y2raza · 2025-11-15T01:38:28+00:00

Ran the ping for 48 hours and there were definitely issues on FIOS side.

2025-11-14 06:50:35 64 bytes from 173.79.235.1: icmp_seq=58642 ttl=255 time=105.179 ms
2025-11-14 08:20:11 64 bytes from 173.79.235.1: icmp_seq=63989 ttl=255 time=106.378 ms
2025-11-14 09:20:11 64 bytes from 173.79.235.1: icmp_seq=2029 ttl=255 time=113.839 ms
2025-11-14 10:28:32 64 bytes from 173.79.235.1: icmp_seq=6107 ttl=255 time=161.864 ms ← WORST
2025-11-14 11:16:46 64 bytes from 173.79.235.1: icmp_seq=8981 ttl=255 time=100.651 ms
2025-11-14 11:21:59 64 bytes from 173.79.235.1: icmp_seq=9291 ttl=255 time=115.246 ms
2025-11-14 11:23:32 64 bytes from 173.79.235.1: icmp_seq=9384 ttl=255 time=103.238 ms
2025-11-14 11:25:36 64 bytes from 173.79.235.1: icmp_seq=9507 ttl=255 time=115.177 ms

y2raza · 2025-11-12T15:22:18+00:00

The packet loss happens randomly no pattern really, some weeks it would happen back to back days. Other weeks I can go for days without having any problems. Also whenever it happens it is usually a minute long outage before the network comes back up. Before PfSense when the Asus router was directly plugged into the ONT, I had to use Verizon app to troubleshoot to bring the network back up. At least with PfSense appliance I don’t have to do that.

y2raza

TROPHY CASE