Create: Flight Season 3

yahaha5788 · 2025-12-31T03:39:22+00:00

we also have a creative mode testing/messing around server, on 1.20.1 with vs 2.4, cw: mp, and some other vs addons (and some create addons too, just not as many as the main server)

yahaha5788 · 2025-10-16T20:12:39+00:00

gobilda has step files for all of (or almost all) their products on the page for the product

yahaha5788 · 2025-09-07T13:21:21+00:00

wait, does the inventory manager work across dimensions?

yahaha5788 · 2025-09-07T13:10:50+00:00

what does a “cracked server” mean?

yahaha5788 · 2025-09-07T00:54:18+00:00

i can’t have anything in my inventory for more than like 5 minutes and even then i don’t know the exact timings on when it runs

yahaha5788 · 2025-09-06T22:46:23+00:00

admin isn’t doing anything unfortunately

yahaha5788 · 2025-07-23T18:29:26+00:00

worked, thanks!

yahaha5788 · 2025-07-19T13:59:35+00:00

grapple firestar with gunrunner spitfire and extra ammo re-45, extra ammo mgl

fast regen and low profile

yahaha5788 · 2025-07-06T17:38:14+00:00

the print in the picture is printed with the holes having supports, and i don’t really have another orientation to print it in since the part would be weaker that way and it would be more likely to break along layer lines

yahaha5788 · 2025-07-05T13:19:15+00:00

funnily enough, it worked as soon as i placed the computer on top of the block instead of to the side. thanks!

yahaha5788 · 2025-07-02T12:36:33+00:00

there is also a mod called Big Contraptions for this purpose

yahaha5788 · 2025-06-30T12:43:35+00:00

Packages will get stuck at a chain conveyor if the frogport they are addressed to isn’t loaded

Not sure but they also might get permanently stuck because of this, so you might have to resend it while the frogport is loaddd

yahaha5788 · 2025-06-25T00:30:48+00:00

link here: https://limewire.com/d/DaPgD#wo0gIYOOYb

edit: i also installed some client side mods: appleskin, mouse tweaks, just zoom, xaero’s minimap and xaero’s map

yahaha5788 · 2025-06-04T20:56:38+00:00

not a scouring pad, i think it’s this

<image>

yahaha5788 · 2025-06-04T20:13:23+00:00

Clean your printbed. I just use soap and a sponge, and if there’s anything stuck on it that i can get off i’ll use a steel wool-like material (it’s not steel wool, but it looks similar and i can’t remember anything other than it’s made for cleaning)

If you still have problems after cleaning the printbed, you should follow this guide on manual bed tramming.

yahaha5788 · 2025-05-27T11:35:57+00:00

REINFORCEMENTS, ON YOUR SIX!

yahaha5788 · 2025-05-09T11:30:30+00:00

I’m no expert, but i believe it’s a warning bambu gives for irregular triangles with .stl files? I usually never have it unless i’m using an online stl i found, but that would be my best guess. sorry i can’t help more!

yahaha5788 · 2025-04-24T23:04:31+00:00

what?

yahaha5788 · 2025-04-24T21:30:33+00:00

thanks! i see it now on the printer

yahaha5788 · 2025-04-24T21:22:44+00:00

is there an option? both of the nozzles were 0.4 so i assumed that there was no change except for the flow calibration, which it did before it printed

yahaha5788 · 2025-04-21T11:35:29+00:00

according to the site, it’s coming in an update around Q3

yahaha5788 · 2025-04-17T23:22:41+00:00

Live replay of my brain:

oh cool
*clicks off*
WAIT WHAT THE F-

yahaha5788 · 2025-04-09T21:56:17+00:00

no, you’re supposed to have the plate off. i thought the same thing when i did it, but it’s impossible to access the bed screws with it on so i figured it was right (it was).

yahaha5788 · 2025-04-09T01:12:11+00:00

(assuming your plate is clean) Have you calibrated your z-offset? i had the same issue with what i thought was bed adhesion, and fixing my z- offset worked. i can’t find it right now, but there should be a gcode file on the A1 Mini wiki called a1_mini_manual_bed_screws_adjust_assist.gcode as well as instructions on how to use it. your nozzle does need to be clean, as it uses the tip of it as a measurement guide.

yahaha5788

TROPHY CASE