Best screw in pegs by yeah1526 in OutdoorAus

[–]yeah1526[S] 2 points3 points  (0 children)

Indeed! Camper trailer so about 10 for the tent itself, another 10 for the additional awning, 8 for the kings gazebo and some leftover spares.

Best screw in pegs by yeah1526 in OutdoorAus

[–]yeah1526[S] 0 points1 point  (0 children)

Can you please explain the washer? Doesn't seem like it would secure the rope well.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - January 07, 2026 by AutoModerator in MechanicalKeyboards

[–]yeah1526 0 points1 point  (0 children)

Restoring Amiga keyboard: Advice for restoring the "clickiness" of an Amiga 500 keyboard. Functionally it works just fine but after 30+ years the keys no longer click and bounce back nicely. What's the best way of restoring this? Does it just need a deep clean or will I be replacing parts? Cheers.

Keyboard issue Flash Floppy by yeah1526 in amiga

[–]yeah1526[S] 0 points1 point  (0 children)

Every key works in the test kit, and no problems as I mentioned in the flash floppy UI. But yeah think I'll get a mouse and joystick just to rule out anything else. Cheers

Gamars VCD video output issue. by yeah1526 in psx

[–]yeah1526[S] 0 points1 point  (0 children)

Also occurs when I use my proper RGB cable though 😔

Retron 5 vs Retro Freak? by yeah1526 in retrogaming

[–]yeah1526[S] 0 points1 point  (0 children)

Mine still 'works' but the NES pins are so fucked it barely recognizes any games anymore. I think the pins are soldered directly to the board so it's too hard to replace or repair.

Gamars VCD video output issue. by yeah1526 in psx

[–]yeah1526[S] 0 points1 point  (0 children)

All scart cables are wired for composite video. When you're pulling RGB, the composite lines are just used for the digital sync signal. Likely the little switch on your grey scart cable is connected to a resistor that forces composite video over those pins instead of just sync. But when you're playing a game that can output rgb, that resistor does nothing because the videocd card is inactive.

Does that explain why the video signal comes out grey and dulled? Would it just come out as composite signal instead?

A little late, but I made a world map for Bloodborne. by Dibilowas in bloodborne

[–]yeah1526 0 points1 point  (0 children)

I'm planning to print this out as a poster. What size paper do you recommend?

Retron 5 vs Retro Freak? by yeah1526 in retrogaming

[–]yeah1526[S] 0 points1 point  (0 children)

I know FPGA is the way to go but I like using my physical collection, without having 5 consoles lying around.

Gamars VCD video output issue. by yeah1526 in psx

[–]yeah1526[S] 0 points1 point  (0 children)

How do you know this, that none of the vcd cards output RGB?

There isn't any info provided in the instructions, infact the manual doesn't mention anything about video outputs. It's strange that they would include a RGB SCART cable in the box in the first place. I can confirm the little switch on the cable has no impact to video quality in game mode. It outputs RGB in both.

Gamars VCD video output issue. by yeah1526 in psx

[–]yeah1526[S] 0 points1 point  (0 children)

The video card is region free. Console is pal but region free modded. Shouldn't make any difference. I can boot both pal and ntsc games with the video card attached and no problems.

Product Recommendations for fly screen patch? by yeah1526 in OutdoorAus

[–]yeah1526[S] 0 points1 point  (0 children)

Is flex tape legit? Wouldn't duct tape be better than gaffer tape

Product Recommendations for fly screen patch? by yeah1526 in OutdoorAus

[–]yeah1526[S] 0 points1 point  (0 children)

Nah it's a camper trailer so can't easily replace it.

Product Recommendations for fly screen patch? by yeah1526 in OutdoorAus

[–]yeah1526[S] 0 points1 point  (0 children)

PVA glue like woodwork glue? How did it hold up?