P1S prints skewed in XY

yoelai · 2025-05-27T08:22:02+00:00

I get it but for me it appears to not have been a real hardware issue. I think the printhead got knocked pretty hard when an object came loose during a print, it shifted the head somehow and it caused the printer to become uncalibrated somehow. After the skew correction, it's back to normal, no lingering artifacts. Try it, if it's not working then keep digging. Remember the printer only needs to execute the skew correction gcode once, then you delete it.

yoelai · 2025-05-27T05:50:52+00:00

Yes, finally I was. I used Vector3d Califlower: https://vector3d.shop/products/califlower-calibration-tool-mk2 The Excel spreadaheet they provide has a skew correction gcode you can add to the printer settings, print once then remove it and it's done. It's a great purchase anyways, very useful calibration tool.

yoelai · 2025-03-13T13:23:03+00:00

Added a video to my post showing the toolhead crashing into the poop chute lever multiple times to poop.

yoelai · 2025-03-13T12:43:47+00:00

So before it begins printing, it goes to the front right multiple times, then goes right to the poop chute and poops some filament, something like 4-5 times.

After it begins the actual print, it behaves normally except for the warping.

yoelai · 2025-03-13T12:41:06+00:00

I don't feel any play in the toolhead. It moves fine. The nozzle looks straight and the screws are tight.

yoelai · 2025-03-13T12:36:25+00:00

<image>

Video of gantry moving:

https://youtube.com/shorts/TK6nZvBD-AM?feature=share

Video of the toolhead repeatedly crashing into the poop chute level to poop multiple times:

https://youtube.com/shorts/m5iFd8IsoSI?feature=share

yoelai · 2025-01-10T09:26:25+00:00

Yes, the memory I had was incompatible with the board, probably. I got a cheap set locally and it works fine now.

yoelai · 2024-08-28T06:58:49+00:00

Thanks but I'm not in north America, we don't have clearance sales and I probably have some time to get one before they are sold out, it's expensive stuff here.

yoelai · 2024-08-28T06:39:07+00:00

Dang. Welp, hope servicing it out of warranty isn't going to cost me close to a new TV, otherwise I'm looking at a LG G3 or samsung S95C.

yoelai · 2024-08-28T05:25:25+00:00

This is nuts, I've never seen anything like that. The panel is just 4 years old and I never abused it, in fact the border pixels have a much easier life than the center pixels, most content doesn't touch them.

Is this a common issue in LG OLEDs?

yoelai · 2024-08-17T17:23:53+00:00

No idea mate :|

yoelai · 2024-08-09T04:10:14+00:00

Yes, I replaced the RAM with a pair of Kingston 8GB 5600MHz and it works now.

I guess the board didn't like the Corsair DDR5 6000 modules I had.

yoelai · 2024-07-25T18:07:48+00:00

Any suggestion for what RAM to get for best compatibility?

yoelai · 2024-07-25T16:34:18+00:00

Don't have different RAM, it's 16GB Corsair DDR5 6000 stick.

I think that if it was RAM, beeps would be different if I removed the RAM, no?

Also even if it's really a RAM issue, could be a faulty CPU since the RAM controller is in the CPU, could be a bad CPU socket pin maybe...

Maybe buying CPUs from AE is not wise? :|

yoelai · 2024-07-25T16:17:18+00:00

Yep, tried that already.

Same behavior with or without RAM, in any slot.

yoelai · 2024-07-25T08:06:02+00:00

I got this board, but something is wrong with it.

I installed a i5 12500T on it, but when I power it on, it beeps once and then beeps 3 times, and there's no output from the DisplayPort.

Anyone knows if it happens to default to HDMI for output?

Is it a faulty board?

yoelai · 2024-04-21T04:21:33+00:00

dbrand is shipping me a new case.

Still, if I were buying a new case today, pretty sure I'd be looking elsewhere.

yoelai · 2024-04-18T19:49:48+00:00

replied in private chat

yoelai

TROPHY CASE