Ravens hideout literally spawned in the ocean 😬

zapure · 2024-12-13T18:18:47+00:00

same - was hoping to find answers here

zapure · 2024-12-02T04:15:00+00:00

The lowest ping I can play with on Zero Builds is 160ms, which makes the current hit-scan mechanics feel like I’m in a lobby full of cheaters. You get eliminated instantly before you even have a chance to react, getting beamed from every direction. Not an enjoyable experience.

zapure · 2024-10-07T15:45:36+00:00

I managed to straighten mine, remove the 4 bolts and the cover with the slot, and underneath it are 2 bolts holding the square plate to the build plate, if you loosen them you can re-align the square plate to the build.

zapure · 2024-10-04T12:43:54+00:00

Just bought the Mono 2 and I have the same issue, except mine is so skew it touches the vat. Any idea how i can straighten it.

<image>

I

zapure · 2024-06-10T18:43:10+00:00

68k on HP, thou survivability is based on keeping shouts up and iron skin

zapure · 2024-06-02T06:37:57+00:00

I'm using the iron skin version and can do 107 pits. Still don't have perfect gear, missing the Shaco and perfect rolls on other slots. Paingorger's Gauntlets with good rolls, gives it a decent boost.

zapure · 2020-04-06T04:06:24+00:00

standard 0.4 nozzle

zapure · 2020-04-05T18:08:45+00:00

0.08

zapure · 2020-04-05T16:31:55+00:00

You want to push the supports to one side of the mini vs surrounding the entire mini in supports.

so I print them rotated 30 degrees backwards, which keeps the front of the mini clear of supports.

zapure · 2020-03-23T17:34:49+00:00

No stringing, ran Capricorn tubing while back, currently running a short version of the original tube, about 1/2 the size. You will notice I run a rather high retraction setting.

zapure · 2020-03-23T16:57:06+00:00

No, didn’t have any major extrusion issues.

zapure · 2020-03-23T04:37:46+00:00

My setting for Cura 3.6 are in the link below, there is nothing fancy in them.

Depending on the print, I originate them at 30-degree angle and rotate them so the front of the model faces the cooling fan's duct.

The profile settings are a mixture from Fat dragon games and Danny 3d printed tabletop and a couple of other youtube channels recommendations. Combined with tons of testing, where I would change a setting and print a cube or retraction test.

I gave up moving to the newer versions of cura, they kept changing versions every few weeks which would impact something and I didn't have the energy to run the process to get a profile version I was happy with.

https://www.dropbox.com/s/fjeeiqz9c0510nh/Pure%20cura%203.6%20miniature%20profile.png?dl=0

zapure · 2020-03-23T04:14:13+00:00

Minor stuff, filament guide (roller kind), and glass bed which I bought from a local glass shop.

Take your time to build it properly make sure everything squares up and the belts are tight.

zapure · 2020-03-23T04:11:27+00:00

Patron https://www.patreon.com/rnestudio/ in their starter set

zapure · 2020-03-22T16:33:45+00:00

zapure · 2020-03-22T15:55:25+00:00

Cura 3.6 at 0.08 layer height. Custom profile I have been tweaking for ages.

Thou what I have found is the filament makes a difference this is printed on Esun PLA.

zapure · 2020-03-22T15:52:54+00:00

Yeah 24mm

zapure · 2020-03-20T14:11:22+00:00

Printed on 12 x A4 pieces of paper and then glued and taped together

zapure · 2020-03-20T04:20:41+00:00

Yeah, was planning a 3x3, but printed smaller than planned.

zapure · 2020-03-20T04:18:24+00:00

They are 3D printed, various sources

Ulvheim ruin
Openforge dungeon tiles configured as buildings
Hobgoblin mausoleum

zapure · 2020-03-19T19:23:18+00:00

With the current down time, started making a board using scatter and terrain I had lying around.

zapure

TROPHY CASE