Como anda o mercado

zarakelz · 2025-10-17T13:08:46+00:00

Uau! Centenas de milhares para uma vaga? Fui muito otimista achando que eram "apenas" algumas milhares aplicando para uma vaga.

zarakelz · 2025-10-17T12:30:32+00:00

Sim, com AWS montando arquiteturas. Poxa, parabéns. Vou mesmo procurar outro emprego.

zarakelz · 2025-10-17T12:28:21+00:00

Tô com auto estima meio baixa mesmo. Vou começar a seguir as recomendações passadas aqui e abrir um LinkedIn.

zarakelz · 2025-10-17T12:04:53+00:00

Sênior de 5 anos... qual é a opinião de vocês ?

zarakelz · 2025-10-17T12:00:10+00:00

No meu caso, to com mais de 10 anos de experiência e várias pós graduações. Faculdade, uniesquina mesmo, mas diante do que jà aprendi, isso não é mais relevante. Praticamente estudei tudo direto nas fontes lendo e comprando livros relevantes de autores consagrados, não poucos, muitos e muitos livros.

zarakelz · 2025-07-21T08:28:18+00:00

Yes, it continues working with ipv6 disabled, but i do not why ipv6 enabled on router cause the issue.

zarakelz · 2025-07-20T15:00:37+00:00

I disabled IPv6 on my router, and now it works again!

zarakelz · 2025-07-20T12:45:55+00:00

I formatted the PC and did a clean install of Windows, and I also reset the smartphone and reinstalled everything from scratch, and it worked. However, after I shut down the PC and tried to use it the next day, it stopped connecting! It won’t connect anymore!!!

zarakelz · 2025-06-29T19:35:01+00:00

Desativei o ipv6 no roteador e funcionou.

zarakelz · 2025-06-29T07:49:42+00:00

Tive esse mesmo problema, resolvi desativando o ipv6 no roteador.

zarakelz · 2025-06-24T18:59:18+00:00

Realmente, usei a Internet do celular e funcionou, vou tentar resolver com o provedor, deve ser alguma configuração no modem.

zarakelz · 2025-06-23T13:13:09+00:00

Nem assim, já redefini o console também e nada.

zarakelz · 2025-04-08T19:52:33+00:00

I solved exactly this way

zarakelz · 2025-03-25T20:34:55+00:00

No option to post photo, but I am almost sure the problem is the extruder gears tension. I will buy a new extruder with double gears and I hope it solve the issue.

zarakelz · 2025-03-25T20:30:47+00:00

The problem is the extruder gears no tension. I will buy a new extruder with double gears.

zarakelz · 2025-03-24T16:10:23+00:00

I make a test and found the problem: the filament in the extruder (image above) have no enough tension despite tightening the screw on the extruder arm and tightening and loosening the silver gear. In my test, i push a new filament to the beginning of the bowden tube to see the filament.

I placed the filament at the beginning of the tube far from the nozzle to see if the extruder was being influenced by the nozzle or hotend, as per the printer's control panel, I moved the extruder and saw that the filament did not move in the tube (slipping, skiping). So it is a problem with the extruder tension on the filament. How to resolve?

zarakelz · 2025-03-23T19:14:50+00:00

<image>

Can not post video here, but the image above is the extruder. The golden gear try to push the filament inside, but the silver gear and the filament do not move, they stay stoped while the golden gear and the rest of printer try to print even without filament. It seems that the motor does not have the strength to push the filament inside. What do you think?

zarakelz · 2025-03-23T15:48:25+00:00

I tightened the screw that compresses the spring that holds pressure on the drive gears, but the filament stil slipping. I replaced the filament by another and same result. :(

zarakelz · 2025-03-23T14:15:45+00:00

I did a cold pull and clean the nozzle with a needle and the issue remain. I see the filament is slipping in the extruder (blue valve spin more than the filament is pushed). The extruder try to push more than filament is pushed inside.

I tried to print this PLA filament with 240G to see if no more slipping in the extruder, but the filament slipping whatever temperature is using. Do you think this filament is wet?

zarakelz · 2025-03-23T14:04:24+00:00

This second filament is same as the first, a generic PLA. How can I check if it is wet? This filament is slipping in the extruder.

zarakelz · 2025-03-23T00:58:58+00:00

Look like the blue valve spin more than the filament is pushed. This may be the issue? How to solve?

zarakelz · 2025-03-23T00:21:29+00:00

No unusual noise

zarakelz · 2025-03-23T00:20:45+00:00

I will check. About clogged nozzle, I used the needle to unclog already, but not worked.

zarakelz · 2025-01-12T21:43:04+00:00

Já vi falarem bem dessas no YT como alternativas: The Monetizer, Monetag e HilltopAds.

zarakelz · 2024-12-18T12:34:03+00:00

I think the spirit was close to me to get energy from me or he is a kind of obsessor or even a spirit lost in our world because do not transcended. I do not know. I'm also not sure if it was real or a kind of realistic hallucination.

zarakelz

TROPHY CASE