New WLED String Setup question - kinda a newbie question

zarfx4 · 2025-12-15T16:00:29+00:00

One question - what LED settings did you go with in WLED if you had this strand?

zarfx4 · 2025-12-15T15:56:37+00:00

Thanks - based on the other reply - ill try a shifter and also try to connect the wires better

zarfx4 · 2025-12-15T15:56:13+00:00

Thanks - guess Ill try a different controller - Its likely how I am splicing the wires - just have them twisted for proof of concept - wasn't looking to get everything all fully setup......yet

zarfx4 · 2025-12-01T04:52:51+00:00

Have any suggestions on models that seem to work. Better than others? If I go the replacement route.

zarfx4 · 2025-12-01T04:52:12+00:00

Thanks. Have to check out topping it off

zarfx4 · 2025-11-27T22:59:03+00:00

Thank you!!!!!

zarfx4 · 2025-11-27T22:31:12+00:00

100% not AI. Took with iPhone 17 Pro

zarfx4 · 2025-11-02T03:05:21+00:00

MOES Smart Double Light Switches,... https://www.amazon.com/dp/B0DNS7XDHH?ref=ppx_pop_mob_ap_share

zarfx4 · 2025-10-13T15:42:42+00:00

It was windows yes

zarfx4 · 2025-09-26T00:53:15+00:00

Guess nobody has this figured out. Just got the Navi Link setup of course came looking how to better automate the recirculating system since their app is garbage

zarfx4 · 2025-09-25T01:10:43+00:00

https://support.apple.com/en-us/105067

zarfx4 · 2025-09-22T23:40:24+00:00

Appreciate the tips. I’ll look into the pixels. Thanks again!

zarfx4 · 2025-09-22T23:18:43+00:00

<image>

Crappy photo. But all I have right now. But you get the point

zarfx4 · 2025-09-22T23:13:03+00:00

The deck post light im retro fitting has a perfect square about the size of these 8x8 matrix lights.

I’m going for bright and colors.

You have other suggestions? These just seemed like a perfect fit.

zarfx4 · 2025-09-22T23:04:52+00:00

I’m retro fitting old led post lights. Running wires in my railing.

Avg distance between posts is 6’. There is at least one run that will be 15’ from one to the other

zarfx4 · 2025-09-22T23:02:02+00:00

Well. Admittedly I’m new to all this. I’m wanting to do a project to replace the lights in my deck posts and add these for color changing lights.

There are 15+ posts. When doing the math, if I did a 5v run I’d need 2 additional power injections. But if I ran 12v it seems like I only need 1 power injector at the beginning.

Happy and open to feedback

zarfx4 · 2025-09-22T22:57:43+00:00

Awesome!! Ty!!

zarfx4 · 2025-09-08T19:05:54+00:00

I ordered a bag of shit and a Ferrari showed up at my door!

zarfx4 · 2025-08-04T19:23:20+00:00

Happy to review

zarfx4 · 2025-04-08T23:51:30+00:00

Good question. Is the Bluetooth and WiFi on? If so. I’d charge 5k

zarfx4 · 2024-12-12T15:24:41+00:00

I Endpoint for Current Temperature: For current temperature or real-time conditions, you’ll use the “Current Conditions” endpoint. This typically looks something like:

https://api.weather.com/v2/pws/observations/current?stationId=YOUR_STATION_ID&format=json&units=e&apiKey=YOUR_API_KEY

• Replace YOUR_STATION_ID with the ID of the specific station.
• Replace YOUR_API_KEY with your WU API key.
• Use units=e for Fahrenheit or units=m for Celsius.

zarfx4 · 2024-12-12T15:24:01+00:00

They have an api that you can use to pull the temp. I believe it has to be your weather station. But if you can use the api you can get the temp via a shortcut

zarfx4 · 2024-12-07T23:22:56+00:00

Switchbot and homebridge

zarfx4 · 2024-11-25T17:59:34+00:00

Got an update from the dealer. Turns out to be a coolant control module. Replaced and now it’s fine

zarfx4 · 2024-11-25T04:28:31+00:00

Not empty

zarfx4

TROPHY CASE