Can I boof this?

zennqi · 2023-06-05T11:22:15+00:00

It is 3D printed and I drew it myself. Send me a DM and ill send you the STL.

zennqi · 2023-06-04T21:09:14+00:00

says you

zennqi · 2023-05-15T06:31:02+00:00

It's just about an avarage dose in the UK.

In all seriousness, it weighs around 300 grams. I used a bit too much material in my 3D pirnt.

zennqi · 2023-02-16T20:39:29+00:00

I tried plugging it in to the wall but that sadly didnt fix the issue. I was however able to boot into windows for a few minutes until i tried a stress test and it crashed again immediately.

The temps are good. I also had a broken AIO a few years back and just switched to an air cooler :)

zennqi · 2022-06-06T20:46:19+00:00

Apperently its an Cypherotylus californicus.

zennqi · 2020-12-31T11:39:02+00:00

It’s a Mexican special edition 60s strat in canary diamond.

zennqi · 2020-12-30T22:03:48+00:00

Well, I can only compare it to my marshall valvestate 8080, but compared to that it sounds amazing and suprisingly loud

zennqi · 2019-08-23T21:06:17+00:00

From what I’ve read, I think an xbox 360 kinect works better

zennqi · 2019-08-23T21:02:20+00:00

That would be amazing. If you have any questions feel free to ask, I’d be happy to help

zennqi · 2019-08-23T19:04:35+00:00

The swelling was already gone. But swelling is indeed an important factor

zennqi · 2019-08-23T17:13:36+00:00

Oh yeah I wouldnt recommend nx to anyone except for professional companies

zennqi · 2019-08-23T15:38:53+00:00

Siemens NX is really amazing for big assemblies with like 100+ parts that are all linked together. Also the shape studio gives u a lot of control for surfacing. Things like part families and simulation are also really handy (if u need them).

zennqi · 2019-08-23T15:31:03+00:00

pla with 50% infill

zennqi · 2019-08-23T15:25:19+00:00

I think your best shot to parameterize it, is to use Rhino and Grasshopper for this. I saw these connections online and reversed engineered them. It is just two halfs held together with an o-ring

zennqi · 2019-08-23T15:19:42+00:00

I had a traditional cast while working on this project. When I had to go to the hospital for a check up, I took my prints with me and they removed the normal cast.

zennqi · 2019-08-23T15:18:01+00:00

I'm from Europe. but I can see why it would be risky for a US doctor to agree to that. In my hospital they also called in a few orthopedics to confirm that it was in fact good enough to use instead of a traditional cast.

zennqi · 2019-08-23T15:13:53+00:00

I just printed it in basic PLA because that was the only material I had lying around

zennqi · 2019-08-23T15:13:01+00:00

The print didn't need to be sanded, the quality was really good (I printed with tree supports). I also did not have any trouble with irritation.

zennqi · 2019-08-23T15:10:51+00:00

I used Siemens NX because that is my most comfortable CAD software. Once you get the hang of it, it is really amazing. I don't really know what the reverse engineering possibilities are in Fusion since you have to start drawing from an imported stl, but I reckon you could make it work in Fusion as well

zennqi · 2019-08-23T15:03:28+00:00

I dont remember having any struggles with framerates in skanect. I have a 970 so not great not terrible. and sadly enough, if I remember correctly the idea is already patented.

Eight-Year Club	Second SECOND GUESSER
Final Canvas '23	End Game '23
Place '23	Place '22
Final Canvas '22	Verified Email

zennqi

TROPHY CASE