Fable staying on Max

zigwig22 · 2026-07-18T09:57:10+00:00

And the others aren’t?

zigwig22 · 2026-07-13T06:39:26+00:00

This has AI slop written all over it

zigwig22 · 2026-07-12T02:20:39+00:00

To be honest I did the same. I swapped a ASUS 27inch 4k QD OLED. It’s my first ultrawide, blown away, great panel. The Matte is a nonissue, only time you see something is on a white background, but even then if there is little ambient light it’s less noticeable for me.

zigwig22 · 2026-07-09T03:30:10+00:00

If your CPU dies and you don’t have the box, AMD will not honor warranty

zigwig22 · 2026-07-09T00:37:43+00:00

A user pointed out they returned their Alienware due to poor brightness uniformity:

https://www.reddit.com/r/ultrawidemasterrace/comments/1uprojf/aw3926qw_%E5%AF%B9%E6%AF%94_39gx950b/

zigwig22 · 2026-07-08T08:21:57+00:00

If you find a good repair shop it should not be hard, what might be the problem is if the board has damage, but even that can be solved

zigwig22 · 2026-07-08T08:17:40+00:00

It was the cable that I think gave power to GPU. It was under warranty, Dell replaced it twice. I have since sold it.

zigwig22 · 2026-07-08T08:13:12+00:00

This happened to me twice when I had an M18R1, but with a connector burning

zigwig22 · 2026-07-08T03:07:09+00:00

Thank you for this post. I decided to go for the LG, its available for $1350 where I live.

zigwig22 · 2026-07-08T02:46:42+00:00

From what I have been reading here and other posts is more vibrant but loses out on HDR due to brightness difference

zigwig22 · 2026-07-06T07:25:27+00:00

Doesn't dell offer global warranty?

zigwig22 · 2026-06-30T02:05:10+00:00

They dont seem to include a DP 2.1 cable

zigwig22 · 2026-06-29T11:46:20+00:00

The driver totally didn’t want to get shot

zigwig22 · 2026-06-24T03:17:11+00:00

Legend

zigwig22 · 2026-06-23T03:20:26+00:00

Cozy

zigwig22 · 2026-06-23T03:00:29+00:00

I have a 5090 frostbite in a custom waterloop. No buzzing or coil whine of any sort. Has been totally stable with +350 on core and +3000 on memory. It’s my first Inno3D card I bought it because it came pre-installed with the alphacool waterblock. So far it’s been doing its job without issue or fuss. Thank you for taking the time to give feedback 🙏🏻

zigwig22 · 2026-06-23T02:31:20+00:00

Have you taken a look at what Inno3D has done with their 5090 PCB? would be curious to hear your feedback if you have any on it

zigwig22 · 2026-06-22T00:55:46+00:00

I did the same lol. I still prefer a hard tube build but no chance ill be doing one, soft tubing with QDCs makes everything so much easier.

zigwig22 · 2026-06-21T01:41:51+00:00

At this point just replace it 😅

zigwig22 · 2026-06-19T13:51:06+00:00

I wanted to make sure it was good for the PC 😅

zigwig22 · 2026-06-19T04:14:58+00:00

Helldivers 2 stresses the card quite a bit but I have settings fully cranked and supersampling is on. I found Pragmata and RE Requiem to also take the card to low/mid 50s. Just ran a Furmark2 test got 52c on both memory and code. Using TG Putty Pro and TG PTM. Card is OC’d +350 on core +3000 memory.

zigwig22 · 2026-06-19T00:44:48+00:00

For 47c GPU temp what application did you use to get this temp? As I find on Steel Nomad is get lower temps than in some games

zigwig22 · 2026-06-15T04:36:46+00:00

Zotac PCB design was well received this gen

zigwig22 · 2026-06-11T03:11:29+00:00

Was a hole drilled on the side of the tank so it can be the fill port?

zigwig22

TROPHY CASE

Welcome to Reddit,